M35 Aluminum Under Tray - Test Fitting

Forum for Infiniti M35 and M45, and Nissan Fuga owners.
tollboothwilley
Posts: 3759
Joined: Sun Aug 26, 2007 7:45 pm
Car: 2003 G35 Sedan w/ NAV
Location: LAS VEGAS!!!
Contact:

Post

I was holding off production for a bit - to see if there was enough interest to make it happen...I was unsure of the demand, but I think its good enough that I will at least make one run of them for those in this thread who have been following along


User avatar
pedsemdoc
Posts: 1041
Joined: Mon Jun 07, 2010 1:45 pm
Car: 2013 M37 Sport - SOLD, Premium/Tech/Sport Journey
Carbon fiber engine cover
GT Spec front tower strut bar
R2C Intakes
Oil catch cans
Custom Start button LEDs
Location: Southlake, Texas

Post

tollboothwilley wrote:but I think its good enough that I will at least make one run of them for those in this thread who have been following along
ALL RIIIIGHT!!!

Payment Instructions?

i can't wait to get this bolted up to the ride....

The list of (early) adopters, in no particular order (based on comments, now of course, you've got to put your money where your mouth is...):
1. Mr. Luv
2. Larz
3. Anthony (CPJ LB)
4. Craig (pedsemdoc)
5. Divindra
6. bicsintegra
7. RM450 GT
8. Ilya
9. Loucast
10. vasekvi
11. eniGmA1987
12. Cabo
13. Hans (rxmclaren7)
14.

tollboothwilley
Posts: 3759
Joined: Sun Aug 26, 2007 7:45 pm
Car: 2003 G35 Sedan w/ NAV
Location: LAS VEGAS!!!
Contact:

Post

organized list - i like it.

Once they are finished and ready to ship we will use paypal. I don't like to collect money until everything is ready to go.

EniGmA1987
Posts: 2258
Joined: Tue Apr 28, 2009 5:13 am
Car: '06 Infiniti M35 Sport

Post

@pedsemdoc you can take my name off that list since I already have one... lol :)

These are awesome pieces and anyone who is on the fence about it should definitely get one of these

User avatar
Six_Legs
Posts: 264
Joined: Mon May 05, 2014 11:28 am
Car: 2007 Infiniti M45 Sport
1995 Nissan 240SX SE 5spd
Location: Nor Cal

Post

:wavey: I'll take the #11 spot since EniGmA isn't in need...

User avatar
pedsemdoc
Posts: 1041
Joined: Mon Jun 07, 2010 1:45 pm
Car: 2013 M37 Sport - SOLD, Premium/Tech/Sport Journey
Carbon fiber engine cover
GT Spec front tower strut bar
R2C Intakes
Oil catch cans
Custom Start button LEDs
Location: Southlake, Texas

Post

Revised list:

1. Mr. Luv
2. Larz
3. Anthony (CPJ LB)
4. Craig (pedsemdoc)
5. Divindra
6. bicsintegra
7. RM450 GT
8. Ilya
9. Loucast
10. vasekvi
11. Six_Legs
12. Cabo
13. Hans (rxmclaren7)

User avatar
Ilya
Moderator
Posts: 9205
Joined: Fri Apr 23, 2010 11:20 pm
Car: 2011 M56x but I spend a lot of time on my 2015 Kawasaki Vulcan S. Former owner of a 2007 M35x. Also take care of my wife's 2016 QX60.
Location: Charlotte, NC
Contact:

Post

So it's $200 shipped? Or what was the final price?

tollboothwilley
Posts: 3759
Joined: Sun Aug 26, 2007 7:45 pm
Car: 2003 G35 Sedan w/ NAV
Location: LAS VEGAS!!!
Contact:

Post

Brushed will be $180 shipped. Powder Coated Black will be $200 shipped. Prices are for lower 48 states. Other locations will have additional shipping costs.

User avatar
Six_Legs
Posts: 264
Joined: Mon May 05, 2014 11:28 am
Car: 2007 Infiniti M45 Sport
1995 Nissan 240SX SE 5spd
Location: Nor Cal

Post

Brushed for me...

Waiting for further instructions!

User avatar
TXT
Posts: 363
Joined: Wed Jul 11, 2012 7:13 pm
Car: 2006 M45 Sport
Location: Mooresville, NC

Post

Enigma, anyway you can take a pic of it with the fender liner on? I currently have my plastic piece held on with zip ties. Jersey roads literally ripped it off the bolts holding it on!

I'll most likely be on the list. Whats the ETA on these? Can you give a month I can expect this?

I wonder how bad the black powder coated one will look after all the abuse. I am assuming all the scratches will expose the aluminum.

tollboothwilley
Posts: 3759
Joined: Sun Aug 26, 2007 7:45 pm
Car: 2003 G35 Sedan w/ NAV
Location: LAS VEGAS!!!
Contact:

Post

i don't think you will scrape as much as you think, but scraping will inevitably scatch off some of the finish for sure. I bet it will continue to look good even w/ scrapes though.

i expect i will have them ready in 2 weeks depending on shop lead time

EniGmA1987
Posts: 2258
Joined: Tue Apr 28, 2009 5:13 am
Car: '06 Infiniti M35 Sport

Post

TXT wrote:Enigma, anyway you can take a pic of it with the fender liner on? I currently have my plastic piece held on with zip ties. Jersey roads literally ripped it off the bolts holding it on!

I'll most likely be on the list. Whats the ETA on these? Can you give a month I can expect this?

I wonder how bad the black powder coated one will look after all the abuse. I am assuming all the scratches will expose the aluminum.

Nope one of my liners was ripping off and I just removed it and the other one when I was working on a bunch of lighting stuff and now I don't have them. Ill probably get some replacements sometime in the next few months but for now I cant take the pics since I dont have any fender liners at all. I can say with certainty though that this does cover the whole under engine bay to the side wall pieces between the bay and the wheel wells.

User avatar
Ilya
Moderator
Posts: 9205
Joined: Fri Apr 23, 2010 11:20 pm
Car: 2011 M56x but I spend a lot of time on my 2015 Kawasaki Vulcan S. Former owner of a 2007 M35x. Also take care of my wife's 2016 QX60.
Location: Charlotte, NC
Contact:

Post

Six_Legs wrote:Brushed for me...

Waiting for further instructions!
Same!

sroks5
Posts: 38
Joined: Tue Jul 30, 2013 7:18 pm

Post

Can you put me on that list. I want a brushed one.
Thanks

User avatar
pedsemdoc
Posts: 1041
Joined: Mon Jun 07, 2010 1:45 pm
Car: 2013 M37 Sport - SOLD, Premium/Tech/Sport Journey
Carbon fiber engine cover
GT Spec front tower strut bar
R2C Intakes
Oil catch cans
Custom Start button LEDs
Location: Southlake, Texas

Post

1. Mr. Luv
2. Larz
3. Anthony (CPJ LB)
4. Craig (pedsemdoc) -brushed
5. Divindra
6. bicsintegra
7. RM450 GT
8. Ilya
9. Loucast
10. vasekvi
11. Six_Legs - brushed
12. Cabo
13. Hans (rxmclaren7)
14. sroks5 - brushed
15. who's next?

User avatar
The Bodyguard
Posts: 1371
Joined: Wed Nov 17, 2010 9:52 pm
Car: 08 Infiniiti M35 black loaded custom VIPDOUT
08 Infiniiti G35 S sold 92k miles
08 Infiniiti M45 S sold 78k miles
07 Infiniiti M35 traded 53k miles
95 Infiniiti J30 sold 155k miles
Location: Cypress, TX (Houston) o.g. from southern cali (North Hollywood)!!

Post

pedsemdoc wrote:1. Mr. Luv
2. Larz
3. Anthony (CPJ LB)
4. Craig (pedsemdoc) -brushed
5. Divindra
6. bicsintegra
7. RM450 GT
8. Ilya
9. Loucast
10. vasekvi
11. Six_Legs - brushed
12. Cabo
13. Hans (rxmclaren7)
14. sroks5 - brushed
15. who's next?
:poke:

15. The bodyguard-black

User avatar
robert_4.5_S
Posts: 240
Joined: Tue Jan 11, 2011 7:24 pm
Car: 2006 M45 S
Location: Queens N.Y.

Post

If its good for 06 M45 then count me in too

16. Robert_4.5_S.

tollboothwilley
Posts: 3759
Joined: Sun Aug 26, 2007 7:45 pm
Car: 2003 G35 Sedan w/ NAV
Location: LAS VEGAS!!!
Contact:

Post

How many of those on the list are gonna want it powder coated black?

RM450GT
Posts: 140
Joined: Tue Sep 16, 2008 12:38 pm
Car: 06 M45

Post

tollboothwilley wrote:How many of those on the list are gonna want it powder coated black?
Brushed for me
06 M45

Divindra
Posts: 44
Joined: Wed Mar 05, 2014 11:17 am
Car: 2009 Jeep SRT8
2007 M35X
2003 Maxima
2002 E46 M3
2005 Sprinter
Location: Brookyln

Post

I'll take a powder coated black one. But if the demands not there then i don't mind brush.

tollboothwilley
Posts: 3759
Joined: Sun Aug 26, 2007 7:45 pm
Car: 2003 G35 Sedan w/ NAV
Location: LAS VEGAS!!!
Contact:

Post

I have enough stuff powder coated its will not be based on "demand"

ALSO

I HAVE PARTS IN STOCK READY TO GO. I have only verified fitment on RWD - I believe the AWD has a different setup and have not checked fitment for you M35X guys. I know for the G35X the motor is different because of oil filter location and because of suspension variation it needed a different under tray.

THAT SAID - I am ready to start taking orders for those who want a brushed finish. Those who want it powder coated will need to wait til i have picked them up from being coated.

tollboothwilley
Posts: 3759
Joined: Sun Aug 26, 2007 7:45 pm
Car: 2003 G35 Sedan w/ NAV
Location: LAS VEGAS!!!
Contact:

Post

Also - I have checked and the M45 should fit the same - with the one caveat being that I have not fitted to an M45. Only Infiniti parts numbers are the same. It is possible that oil filter / drain plug are located differently.

tollboothwilley
Posts: 3759
Joined: Sun Aug 26, 2007 7:45 pm
Car: 2003 G35 Sedan w/ NAV
Location: LAS VEGAS!!!
Contact:

Post


tollboothwilley
Posts: 3759
Joined: Sun Aug 26, 2007 7:45 pm
Car: 2003 G35 Sedan w/ NAV
Location: LAS VEGAS!!!
Contact:

Post

New Screws are included with the under tray for free

User avatar
DaSerb
Posts: 223
Joined: Fri May 13, 2011 2:19 pm
Car: '07 M45s
'16 CX9
Location: Chitown

Post

This is really tempting... :naughty:

User avatar
Six_Legs
Posts: 264
Joined: Mon May 05, 2014 11:28 am
Car: 2007 Infiniti M45 Sport
1995 Nissan 240SX SE 5spd
Location: Nor Cal

Post

Just ordered... :naughty:

Wangtang408
Posts: 579
Joined: Wed Apr 17, 2013 11:32 am
Car: 2006 Infiniti M35
Location: NorCal

Post

No group buy discount? :confused:

RM450GT
Posts: 140
Joined: Tue Sep 16, 2008 12:38 pm
Car: 06 M45

Post

I would like confirmation that it does fit an 06 M45 before ordering

EniGmA1987
Posts: 2258
Joined: Tue Apr 28, 2009 5:13 am
Car: '06 Infiniti M35 Sport

Post

Wangtang408 wrote:No group buy discount? :confused:
lol. That is already a really good price.

tollboothwilley
Posts: 3759
Joined: Sun Aug 26, 2007 7:45 pm
Car: 2003 G35 Sedan w/ NAV
Location: LAS VEGAS!!!
Contact:

Post

RM450GT wrote:I would like confirmation that it does fit an 06 M45 before ordering
Will know soon enough


Return to “Infiniti M35 and M45 Forum”