M35 Aluminum Under Tray - Test Fitting

[tollboothwilley]

call me when you get a chance 7O2.9OO.75O5

[The Bodyguard]

where are all the RWD M35 guys who said they wanted this?

I don't get on here much anymore... (Very busy schedule) but I put my name on the list almost to the end when I noticed it. I'll be ordering mine in the morning! Thanks for all the research and time put in

[CPJ LB]

thanks TBW!! I picked up the shipment yesterday...I appreciate it!!! I'll try and take some pix of the install on Saturday - if I have time to install it....

thanks for the fast shipment and sending via UPS!!!

[tollboothwilley]

no prob at all

[Ilya]

I wasn't able to get the car in the garage this weekend so I'll try sometime this week to report back for the M35x guys.

[svard75]

I wasn't able to get the car in the garage this weekend so I'll try sometime this week to report back for the M35x guys.

Cool stuff IlyaKol. I'm interested if it's a good fit.

[bicsintegra]

i just got back from vacation I will try to put it on this weekend and take pics and post them on here. Thanks TBW looks awesome!

[CPJ LB]

OK, I finally had time to install the aluminum under tray - splash guard….First off, I’d like to give props to TBW for designing and putting a great mod together for the M’s…I saw his work on the G Forums and knew that if he’d make it for the M, it would be a good thing….

The shipping was done quickly and it was sent to me via UPS. I had the package within 3 days after ordering it. The item came packaged really good and wrapped for extra protection.

there are two pieces and the bolts/screws are included. I was getting my oil changed and had the mechanic take out the old plastic under tray and install the aluminum tray…

here are some pix…also, which caught me by surprise when the car was being lowered down, I noticed that the Infiniti emblem that is cut-out of the front piece of the under tray is visible through my lower front mesh grille…I took some photos from the side….nice touch…

I must say, this piece will fit the ‘08 M’s since it is a perfect match to my ’08 sport bumper (I swapped out the ’06 bumper some time ago)….No noise from the engine bay, I think I have better air flow due to the slits and vents in the under tray....enjoy and again, thanks to TBW for making the product for the M!!!

boxed up and arrived in great condition


wrapped for protection


front piece


back plate with oil access door



pleasant surprise with Infiniti emblem from under tray shown through front bumper mesh

[Ilya]

And an update the M35x, TBW sent me a tray two weeks ago which I tried to install last week. No go.

However, I have sent the tray back to him along with my OEM tray (so I'm rollin trayless right now) and he's going to get one made to fit the X.

Stand by for further updates, X guys.

[bicsintegra]

i finally put my tray on tonight it went really smooth love the look, I took a few pics but it is 2 AM and I am tired, will take better pics tomorrow after the test run.

[bicsintegra]

test run still coming I will let you guys know how she sounds tomorrow after I drive her to the doctor.

[EniGmA1987]

That black powder coat looks pretty sick.

[svard75]

And an update the M35x, TBW sent me a tray two weeks ago which I tried to install last week. No go.

However, I have sent the tray back to him along with my OEM tray (so I'm rollin trayless right now) and he's going to get one made to fit the X.

Stand by for further updates, X guys.

Thanks for the update!

[The Bodyguard]

Finally got around to it and placed my order decided to go with the brushed aluminum.

[bicsintegra]

finally did a test drive no rattling that I could hear but I only got up to 45 -50 mph. no highway speeds as of yet.

[The Bodyguard]

Finally got around to it and placed my order decided to go with the brushed aluminum.

Got mine in yesterday just pulled it out of the box and inspected it a bit, will install maybe Wednesday if not wait until the weekend! Looks like one tab is bent not sure if meant to be this way but I'll find out when I go to install it...

[tollboothwilley]

Send me a picture of its. May have been damaged in shilling.

[mr_luv]

I hardly get on here these days like so many other people. Tollboothwilley if you are on FB can you join our M group there are a few folks there that would be interested in your under tray. I am also interested but just havent set aside the funds to scoop one up just yet.

[tollboothwilley]

whats the name of the FB group mr_luv

find me at www.facebook.com/TollboothwilleyTBW and link me to the M group. I haven't seen it on there

[mr_luv]

https://www.facebook.com/groups/MFUGASEDAN/

There you go sent you message also on FB.

whats the name of the FB group mr_luv

find me at http://www.facebook.com/TollboothwilleyTBW and link me to the M group. I haven't seen it on there

[nolmt50]

Just placed an order for a black one!

[The Bodyguard]

Send me a picture of its. May have been damaged in shilling.

I'll send a picture later today. What email should I send it to? It's not major and don't think it's a big deal but I'll send it to you just to make sure!

[tollboothwilley]

Tollboothwilley @ yahoo

[CPJ LB]

reporting back....I believe I installed my new under tray mid July....it's still holding strong and I've washed the car once already....the cut outs / slits in the tray help dissipate/drain water quickly - there was no 'pooling' of water below the engine, thus no warping or drooping like the stock plastic under tray....

I've also received compliments from shops that put my car on lifts and saw the craftsmanship of the under tray... I'm 100% pleased with the purchase!!

[bicsintegra]

ok I drove the car all day yesterday, no worries even went over a low driveway with just a bit of scraping. got her up to about 90mph no rattle or anything, my wife saw the car up in the air when I was installing it and even she likes it!!!!!!!!!!!!!!!!

[tollboothwilley]

Passed the wife test!

[robert_4.5_S]

Can someone say what needs to be done to make it fit m45?

[tollboothwilley]

It was hitting the bottom of the oil pan. I have spacers (1/2") coupled with longer bolts should fix issue. Just rear 4 bolts

[bicsintegra]

It was hitting the bottom of the oil pan. I have spacers (1/2") coupled with longer bolts should fix issue. Just rear 4 bolts

no not the oil pan, it was a driveway of a pizza hut and for some reason the thing is up on a hill so when I came out the bottom of the undertray actually scraped on the ground. I have not had the heart to look under the car to see how bad it is, but then again I only drive the car on weekends until the kit, new rims, and stereo gets put in.

[tollboothwilley]

He was talking about the M45 not what you scraped on. LOL. Most who ar low enough to scrape with the G35 never can tell by looking at it.