Let's see everyones engine pics...

[[email protected]]

[[email protected]]

man yall gots sum nice cars

[Mack-S14]

New pics!

[IMG][/IMG]

[IMG][/IMG]

home made Crank Pulley

[IMG][/IMG]

[sr240dett3]

I dont know if ive posted this before but here is mine.

Its pretty much been the same for a while. Harness fried when we connected a PFC, but i just got a new one FINALLY!. It will be back on the road once the valve covers and IC pips come back from powder coating. I didn't like the dark color thats on there currently. I might do like a gray color, almost like the OEM color. But im not sure yet.

[OKRB20DET]

lol FAKE RB26

[nizmo zilvia]

Obviously a RB25 but noobs will never know.

[mott6904]

26 covers looks a ton better in my opionion

[Eikon]

There is more to that engine than you think. I wouldn't make fun of him for pretending to be an RB26.

[MarcBergeon]

Here's mine, only have about a couple hours left of work to do and i can finally crank it over

these pics arent really to date, but hoses are all on, couplers, clamps, throttle bracket, ect...

[nuffboost]

Here are a couple of pics of mine.
Modified by nuffboost at 1:05 PM 4/11/2008

[OKRB20DET]

There is more to that engine than you think. I wouldn't make fun of him for pretending to be an RB26.

lol why? how about i put some valve covers and stuff on an SR and call it an RB26.

sorry man i'm flaming on his motor, like it or not...thats gay. we all know he's going to claim its a 26. until someone calls him out, so i put it out there.i don't care if its making 800hp, its still an RB25

[ripracer]

I think it's a rb30

[DJButton]

I think it's a rb30

Someone gets it. he builds an RB30, he gets to use whatever valve covers he wants, probably a 26 head anyway if it is a 30.

[Shocker]

Someone gets it. he builds an RB30, he gets to use whatever valve covers he wants, probably a 26 head anyway if it is a 30.

not with that VTC intake cam gear sticking out....or 25 rail with side feed injectors... :P

[DJButton]

not with that VTC intake cam gear sticking out....or 25 rail with side feed injectors... :P

Oh fine ruin my fun.

[Coolwhip]

I doubt its a 30 block since the lower timing belt cover looks to be a factory lower cover for the RB's and if so wouldn't reach that upper cover. Plus you can see how close the water pump is to the head on the first image. Plus the factory RB25 turbo oil drain rules out the 30.

Anyways, if it has more to it, it's probably a 2.7 26crank 25block, or a stroked 2.8 25block.

Either way, even if it's a stock 25, motor looks good.

[l0nestar]

Either way, even if it's a stock 25, motor looks good.

^ What really matters!

[240z4u]

It IS an RB30DET. I actually got to meet him last week, nice guy, doubt he has any reason to BS me.

Evan

[DriftingisLame]

Guess its time after years and years of NICO membership, and 3+ years of RB ownership.

T3, 60 trim, .60 ar cold, .48 ar hot - 15 psi

That ^ turbo, tomei poncams, 440cc supra injectors, Carl H tune, 8200 RPM, the list goes on forever...

Kbye

[gomer23]

Heres some updated pics from the last night.


Modified by gomer23 at 3:36 PM 5/13/2008

[Cjmartz2k]

notice this doesn't say RB26



Here is the same turbo (well compressor at least) as what is on the motor now (and I've got size 13 boots ).




Modified by Cjmartz2k at 12:24 AM 5/14/2008

[Shocker]

more pics of the clean r32!!

[ninety1two40]

Still have more to do but here's a start:



These are a couple weeks old, I'll have to take some new pics.

[DETurbine]

Here are a couple of pics of mine.Modified by nuffboost at 1:05 PM 4/11/2008

Is your greddy intake manifold ceramic coated?

[Coolwhip]

Damn, I saw your name as the last post and thought, "OH MAN, FINALLY SOME UPDATED PICS OF DETurbine's SETUP"

Nope

[exodus5547097]

well i'm not on here much, but here is a pic of my beast as it sat last year. Plenty of plans over winter...still finishing up, T70, Cobra wheels w/ 275 MT ET Streets, top mount mani, tial 38mm WG, dataloging software, etx.

I like you ignition setup. how did you set it up?

[DETurbine]

Damn, I saw your name as the last post and thought, "OH MAN, FINALLY SOME UPDATED PICS OF DETurbine's SETUP"

Nope

haha....very soon my friend. Me and a friend just got done finishing off an RB swap that we were getting paid to do, then helping my friend with a few things on his, then I will be finishing mine finally...had to work out a few things (MegaSquirt), but finally got that figured out.

[sevenpt62]

haha....very soon my friend. Me and a friend just got done finishing off an RB swap that we were getting paid to do, then helping my friend with a few things on his, then I will be finishing mine finally...had to work out a few things (MegaSquirt), but finally got that figured out.

would mind posting up a thread on your install and configuration of the megasquirt setup on the rb? if you dont feel like it would you mind emailing me some of the details?[email protected]

[DETurbine]

I am sure I can do that. Originally I was going to work with the Ford EDIS-6 wheel, sensor, and coils, but then found a guy that had a machine shop make him a custom cam angle sensor wheel for the RB25 cas. I will make some kind of write up on it when we get to putting the MS in.

[mello88]

mwahaha





Finally swapped into my s13... Gotta do wiring and a ton of other little stuff now, but at least it's getting closer! =]