Let's see everyones engine pics...

[Cameron]

Call me Cam,

its an Apexi, Muy Rare..



its hard to get one w/o buying the kit that it came with, cause they werent sold without buying the turbo kit. it was like 5000 dollars, and its discontinued now. so yea..

[matafied]

Heres a updated one of mine. But still waiting on my harness, 4 thousand in upgrades and it just sits their

[Kaufman32]

This is my motor almost done. its in a R34 GT-T.

[gomer23]

Here's where my engine will be resting again soon....i hope.

[Coolwhip]

purty kolar!

[Coolwhip]

that red makes me want to redo mine.

[jdmser]

I was playing around with the wife's new camera and took these.

Click here to watch start-up-gauges

Click here to watch engine-shot

[Yellow4g63]

I was playing around with the wife's new camera and took these.

Click here to watch start-up-gauges

Click here to watch engine-shot

Nice clean looking setup SE-R.

[DJButton]

I was playing around with the wife's new camera and took these.

Click here to watch start-up-gauges

Click here to watch engine-shot

Nice, I like your car alot!

[matafied]

I was playing around with the wife's new camera and took these.

Click here to watch start-up-gauges

Click here to watch engine-shot

Hey What exhaust is that?? Sounds Awsome at idel

[jdmser]

Thanks for the comments, much appreciated. The exhaust is a 5Zigen 304 Border Max catback. Here's a little better shot of it.

[craz4240]

I was playing around with the wife's new camera and took these.

Click here to watch start-up-gauges

Click here to watch engine-shot

Car looks hott,looks like my old s14 with the motor and wheels on my current S14...

You ever get your lean/rich issue worked out???Mine was lower injector isolators.

[jdmser]

Was a combination of things. The homemade intercooler was too restrictive and leaky, the Sard 660cc injectors were really 720cc, and the idle needed to be turned up. Carl also sent me a new chip for the 720s that has it running real smooth. Idles strong now even at 11.5 afr. Should be ready to see 22psi this season. Then it all comes apart again.
Modified by jdmser at 2:17 PM 2/4/2008

[mott6904]

Here are a couple shots of my setup still working on it so i have some things not tied back or put on. Not to sure about how to put on pictures or make them bigger. Hope this works
Modified by mott6904 at 6:30 PM 2/5/2008

[Rbpowerd240]

Here's a couple of mine. Its been a long build but I'm almost completely done.



Not really liking the wiring all ghetto lookin, but I've had some grimlins in it while building so it helps out till its all done then I'll make it look all nice again.

Here's a video of the first start up

[preston240sx]

my swapped rb20det but still part of the nrrba...

[junbnr32]

when first bought:

2 weeks after:

[Kaido]

Well I'm like the guy above, just joined, and eventhough I'm selling it here it is lol.

[skribblah]

very very nice kadio

[lilskyline240]

[240z4u]

Pardon the large quantities of dirt. The big retarded TPS bracket is officially in the trash. I put a KA TPS on that land rover TB.






Modified by 240z4u at 10:49 AM 7/7/2008

[DriftX]

Before Buick Grand National coil conversion.



FMIC, Exhaust

[kevwa]

this is the latest picture - its coming along little by little

[rbs14kouki]

here is mine ;

[slavetothemuzic]

Just got some stuff back from powder coating, so, time for some updated pics!

[krayton]

havent posted in awhile

after rebuild number 1.....doing rebuild number 2 now

[midnightsliding]

what manifold are u running^

[krayton]

greddy on the intake and XS on the exhaust side

[devil_child]

redid some stuff moved the fuse box ran the harness underneath and cleaned it up overall.

[Largekid]

well i'm not on here much, but here is a pic of my beast as it sat last year. Plenty of plans over winter...still finishing up, T70, Cobra wheels w/ 275 MT ET Streets, top mount mani, tial 38mm WG, dataloging software, etx.