IDAHOTUNERS: Big Bore Sr22 Twinscroll Gt30 Build

[idahotuner]

Theee powdercoated parts look great man. Probably a hell of a lot more durable than paint.

Good to see u picked a good head gasket, specially because it can now be put together

People get cometic and cosworth mixed up. From what I've heard cometic is the one you wanna stay away from. Always heard good things about cosworth.

yeah cometic is the one to stay away from cosworth is the s***. they build monster sti's and vg's

Just a little FYI. When is this thing goin together?

this week. i have absolutely everything to get the motor in. gettigna turbo tuseday. i didnt get to work on it this weekend because my grandpa died and i had to drive 12 hours to go see him before he did.

[tokendog]

Sup Idaho, long time no chat

[mRodiek]

Sorry to hear about your grandpa man.

[idahotuner]

Sup Idaho, long time no chat

yeah i know man. hopefully i geta computer pretty soon here then i will install aim.

Sorry to hear about your grandpa man.

yeha he lived a long good life. he was 91 and went in his sleep.

[idahotuner]

well my machinest told me i new new valve guides so i ordered some JWT ones. got a steal on them enjuku racing messed up on there online listing and the guy honored it so i got them for 50 dollars cheaper

[sr240sx20det]

this is a very nice build. where can i see your video u had of your old build? did you have to get new sleeves to bore it out to 90mm ?

[idahotuner]

this is a very nice build. where can i see your video u had of your old build? did you have to get new sleeves to bore it out to 90mm ?

yes darton sleeves are installed in the block to get to 90mm go to youtube and search idahotuner you will get all my videos.

got my turbo saturday too. i am stoked.

[idahotuner]

well i did some minor things on the car. fixed the terminals so both head lights work now.

[idahotuner]

the terminals in side the switch that is. put my consel back together, but my battery is compltely dead. so i might end up buying a battery relocation kit and stick it in the back where the spare tire goes.

just bought 6 550cc injectors for my car. for a good deal. the guy wouldnt split them up and i figure a couple extra wont hurt.

but i gota z32 maf coming. so

all i got to do is get a couple electric fans and tune and the car will be together.

my dad got me a o2 housing for xmas. it is divided to help with the confusion caused by the gases from the wastegate and the turbo working against each other.

[idahotuner]

ok. i got an sweet. idea. i am just talking to my dad about it, but it might put the rest of the engine build on hold, and require me to order new mains

[Didderson]

stroker?Keep us posted but keep in mind driving your car is fun! Too long out of commission and yeah..

[idahotuner]

i wish i could stroke it. but i cant afford it lol. yeah i know what you mean. i have been waiting on my damn head for like 2 months

[mRodiek]

stroker?Keep us posted but keep in mind driving your car is fun! Too long out of commission and yeah..

You prolly wont drive it til spring anyway right? That leaves plenty of time

[idahotuner]

yeah i cant drive it tell march. anyhow. i have everything i need for the car. all i need now. is electric fans, tune, and PS stuff.

[idahotuner]

my schedule pretty much blows right now for working on the motor though.

have 8 am class, then work tell 5 and then class tell 9. and the motor is in my gfs parents garage with all her tools across town. and i cant do anything tell ken from enjuku gets back to me about the valve guides i ordered from them over 3 weeks ago and still havent received. so my machinest is waiting for my guides to put them in the head so i can get the head and finish my assembly. kinda blow.sBLOWS i should say

[idahotuner]

check out this idea i posted in the tech forum zer...id=17

[PuNcHdRuNk]

first off,sexy car mang way to go.......just out of curiosity wtf happened to the six puck clutch with less than 1000 miles on page one? wasthis abuse or an ebay clutch? if ebay can i know the brand so i dont make the same mistake?

[idahotuner]

first off,sexy car mang way to go.......just out of curiosity wtf happened to the six puck clutch with less than 1000 miles on page one? wasthis abuse or an ebay clutch? if ebay can i know the brand so i dont make the same mistake?

no dude, that was due to improper installation. my dad didnt lub the throwout bearing slider. and it was sticking foward allowing the clutch to slip. like i would crank it up to 17psi and it would just slip. then the throw out beearing broke because it stuck then twisted. i had to drop the transmission and replace the slider thats when i lubbed it up. the clutch still grapped lieka mofo though. notice my new one is the same just sprung. trying to make my car slightly more user friendly.

good news is my valve guides are her. fed ex tried delivering them but i wasnt home, so at least i know they are on there way.

[mRodiek]

I have a stage 2 exedy that is sprung and holy s***...grabs like a motherf***er. It better for the price I paid lol. Is there a timeline here idaho or just take your time & get it done properly?

[idahotuner]

you know once i get my head back, it will come together really fast. hoping march to have it driving. snow isnt a issue right now as because there hasnt been any. if i could get it down to where i live now that be awesome, but i really dont want it down here until i dont have to worry about snow. and i dont trust all the mexican gangs in this town. so if it did snow i dont want it just sitting there until i it melts and drive my truck. i just want one vehicle down here i think.

so time line ways. march should be in. hoping

[idahotuner]

I have a stage 2 exedy that is sprung and holy s***...grabs like a motherf***er. It better for the price I paid lol. Is there a timeline here idaho or just take your time & get it done properly?

yeah but your clutch wont hold up to 400ftlbs lol

good news as i was posting the last post, my valve guide just got dropped off

[idahotuner]

well got some stuff done on the motor today.

oil pump primed and and bolted on. still need to torque it down.

water pump on still needs torques down.

helicoiled a bolt hole in the upper oil pan.

made a gasket for the IACV bolted it on the intake. put the BOV back together and on the hotpipe.

[mRodiek]

350 ft/lbs..works for me! lol

[idahotuner]

i dont even think it will hold up to that. i asked alex at phase 2 and he said no. cause i almost got it.

[mRodiek]

I dont plan on reaching that high with my setup anyway, although Enjuku has it listed as 400hp [ ] and 350 ft/lbs.

[idahotuner]

its been a while since i posted, mostly cause i havent done anything. the machinest still has my head, and its pissing me off. he does goodwork but this is not professional. 'well i should be getting a MAF this weekend. and i think i am going to order my fans and fuel rail adapter tomorrow.

just waiting on the head i have everything sitting there. ready to g. once i have my head i could almost have this running in a week ora day for that matter. one long day lol
Modified by idahotuner at 8:18 AM 2/11/2010

[idahotuner]

well i ordered my dual mishimoto fans yesterday. so just will have to wire them up. figure i will have them run for as long as the car is running. so I will just have to finda power source totap into. in the engine bay, that is a constant while the car is running.

I still need a MAF if anyone has one. z32 in good shape

[idahotuner]

all right, just paid fora z32 maf, my electric fans and fan shrowed came but one was broken. so i am filing a claim with UPS. just get these couple things taken care off, think i will sell my 550cc injectors i just bought, and t25.

this is plan.

ISIS V2 tubular manifoldgt3071r frame with gt3071 compressor housing running a .50 a/r and a t2 turbine housing running a .70 a/r with a 44mm external gate. and 5 bolt t28 turbo outlet. should flow more then a gt2871 .64 at 46 lbs/min

make some where in the region of 450 to the wheels with full boost coming on around 4000 rpms

going with some 810cc injectors probably

[s13-t]

hey let me know how much u want for the injectors, and what kind are they?

[idahotuner]

deatschwerk 550 cc i have six of them. i will sell for like 300 shipped obo bought them from an a guy with an rb thats why i got six lol