building a 700hp+ RB25DET

[SullivanRacing06]

whats that in inch lbs toda?

[toadx8u]

7-9 lb-ft or 84-108 lb-in

[wirelessdude04]

[gismonismo]

torque on those is 9-12 N-m...angel if you need anymore torqe specs let me know i have all the S and R chassis FSMs

yo whats up man?whats up with your build?hope your ok bro and your project aswell man.thanks for the love lol.(torque specs).hey I'm almost done I'm going to break in the engine with my stock cams and then install the solids + shims since I haven't got the right size of shims.Riki att Tomei told me it's 4.0mm of off set in the intake.Don't remember the exhaust. also upgrading my oil pump to high rev this btch.lol.I'm also changing the turbo to a HKS T51R still not convince about the t78 thing.Sorry sullivan got it sold with my greddy kid. I have to sell the son of a btch in order to destroy everything out there.lol.But I will be using it to see whats up with it since I haven't used the t78 for a while.I'm down to intercooler piping which I decided to go for 3" since my aim is only 700hpRicky is coming to help me out with some wiring.

Now Sullivans Car is fast so it gave me a idea of what I will be having fun with until its sold lol.Lets see if this time I get to breakin the engine totallylol.Still waiting for Some one who can pretune the Apexi PFC so att least I can drive it to the dyno and to get some fresh paint.I don't think I'll be going to Monster Motor Fab. to get my Rollcage.So open for sugestions....So anyone that can fine tune PFC and a Good roll cage are welcome right now.lol later guys.If I have to pay a trip here its all good and can crash att my place.later guys

[SullivanRacing06]

wtf, i had dibbs on the t78! lol

please!!!!!!!!!!!!!!!!

how much, i got the cash, on top of me driving down to otown now twice for free

[needmorenissan]

when u going to dyno it? i really want to see this car in action!

[SullivanRacing06]

i told ya before that rollins in gainesville makes some bad *** cages, that who did my cage in the s13, and you saw how good it looked!

[Coolwhip]

you really need to go through that whole car with a check list to correct some vital areas...

one being installing bulk head fittings on all those fuel lines, you're just asking for trouble with them travelling through those machined holes.

Also reinforcing your rear subframe is key as well.

[toadx8u]

or he could buy the Jun rear member

[Coolwhip]

or he could buy the Jun rear member

I remember back in like 03 or sometime I was going to pick one up. But too bad they were only for S14's.

Blah, weld in plates, get tires and suspension dialed in to keep from wheel hoppin, and you'll keep your axles and subframe

[toadx8u]

yo whats up man?whats up with your build?hope your ok bro and your project aswell man.thanks for the love lol.(torque specs).

yo man its goin....crank will be done tomorrow then the rotating assembly goes off to the balance shop...im prob gonna migrate my build over to here from the forum since i dont really go on there anymore...yeah man any specs you need just hit me up...

[gismonismo]

wtf, i had dibbs on the t78! lol

please!!!!!!!!!!!!!!!!

how much, i got the cash, on top of me driving down to otown now twice for free

lol sorry but you told me my turbo was no good.lol so Im thinking you don't want another t78.besides how can I win some money out of you?friends don't do that sht.Now your making me feel guilty dude.

please Ricky I'm getting the FMIC piping to fit and then to have them welded together I'm only one man here man.lol.well I'm about to leave this forum since I have this *** modirator thats in love with me rewriting this I post.I have nothing against this kind of people but this dude is realy .insults me and then trys to be polite about it.well just in case some thing happens Ricky and Sullivan can keep you guys posted.Later guys.someone that can fine tune a apexi pfc please let me know rush.

[Coolwhip]

let me know when you want to buy a turbo

[gismonismo]

yo man its goin....crank will be done tomorrow then the rotating assembly goes off to the balance shop...im prob gonna migrate my build over to here from the forum since i dont really go on there anymore...yeah man any specs you need just hit me up...

pm me your phone number [email protected].

[Ls1pwr]

lol is he trying to make sure everyone can read wtf u say? if so i cant blame him man its very very hard to understand what you say. but either way Gl with your build.

[mott6904]

Damn after reading 9 pages of rubbish I still didnt get to see any numbers. Sick build. I hope it is performs well together.

[Ls1pwr]

so i guess i was right, he didnt even make 700rwhp let alone 700 ft lbs of torque........ i told u guys he was full of $hit.

[mott6904]

How did you find out what kind of power he made?

[toadx8u]

he doesnt know...i talked to gismo on the phone yesterday and he was just bolting the balancer on the engine...the engine isnt even in the car yet...and who really cares if it does or doesnt...

[RB24D]

Agreed no matter what it makes it is still a sick build.

[mott6904]

yea either way its an awesome build and it should make good power. I'm just curious to see if he will make his goal

[wakotow]

It's been a month, is it almost done now?

[Stripes]

Did he get locked up or something?

[Kalypso]

this build thread is all over the place, I can barely read whats going on

2jz s14 is pound for pound the best build thread on the forum...

[B00STFED]

after reading 9 pages of bickering no dyno numbers...jeez

[EL MAMITO USMC]

this build thread is all over the place, I can barely read whats going on

well he went to the forum that i post back home in PR and hes posting that the car is runing and that he beats vettes with the greatest of ease.. but hasnt provided any pics of the car or the engine over there. so we found out about this tread and i read it and even so its a great build im not sure if he actually have reach the 700tq goal or even if the car is running. now something that he hasnt said that i personally ask him was , what suspension and brakes he has? because putting a bad a** engine into a S14 chasis , and then running against vettes is not just whp and hit the gas pedal. specially whentwe all know what aerodynamics the vettes have. so any other thing that he says over there ill keep you guys posted and gismonismo..

good luck...

2jz s14 is pound for pound the best build thread on the forum...

[480sx]

2jz s14 is pound for pound the best build thread on the forum...

Idk, if you dont mind reading, mines pretty epic. : )

zerothread/297011

What a surprise about this thread/build, man, i never saw it coming lol.

[EL MAMITO USMC]

well Mr Wilson any updates on your super car???? or you still with the ussual we are still waiting for your response in carrito.net

[RCA]

2jz s14 is pound for pound the best build thread on the forum...

Acidz build is golden and I approve this post above me

I was on this thread in the beginning and stopped watching for a few months...I am glad your still working Gis...

Get hur dun!