What was done to your 240 today?

[whoareu]

i installed my energy rear subframe inserts, replaced my blown rear speakers with the stock rears out of my sti huge improvement as they are actually components stock, also fixed my radio bezel and tried to better align my sparco steering wheel. sorry no pics.

[BTL_nissan]

Have been meaning to post this for a couple of days so hope it still counts lol. Got the head torqued with the arp head studs. Still need to make a build thread but I'm too lazy. Here is a picture, everyone loves pictures

[240life]

Received some new parts


Sprayed some 2K Urethane Primer

[kris93vert]

Installed new rear 240sx emblem, and replaced both washer nozzles on the hood. I s*** bricks when my local nissan dealer told me they had them in stock!

[mechanicalmoron]

Installed new rear 240sx emblem, and replaced both washer nozzles on the hood. I s*** bricks when my local nissan dealer told me they had them in stock!

.....these things are supposed to have emblems?

Mine just says 240 on the quarter windows and garnish, and has a hamburger on the front. I did scrape off wrinkled foil "nissan" and "se" stickers on the hatch, a while back.

[Hijacker]

Installed new rear 240sx emblem, and replaced both washer nozzles on the hood. I s*** bricks when my local nissan dealer told me they had them in stock!

.....these things are supposed to have emblems?

Mine just says 240 on the quarter windows and garnish, and has a hamburger on the front. I did scrape off wrinkled foil "nissan" and "se" stickers on the hatch, a while back.

Coupes and verts have a sticker emblem on the rear between the tails. I replaced mine with a silvia emblem

[MrDanguy]

Looked at it, gave it a pat on the rear, and walked away.

[erick240sx]

Took her to emissions and failed miserably.

[blkvrtswp]

Picked her up from the storage garage - YEAH!

[Hijacker]

Replaced my old and busted steering wheel with a new Momo Competition wheel.

[splintercell]

looks good hijacker!

[badbob2121]

[mechanicalmoron]

drilled holes between the inner and outer rings of my (torn) power window drive bushing, and perminantly installed a nail through said holes.

Epoxy tore, gorilla glue tore, and I was not about to spend 130 bucks for a "remanufactured" one, that might not even have a new bushing.

[Hijacker]

Ordered a set of these today as well as full Nismo rubber bushings for my Z32 aluminum uprights.



Expect a write up in the next month or so once they get here.

[Vh45sx]

I finished stripping my engine bay and removed subframe for some modifications.

[vas13hatch]

Got my single cam pistons installed on the rods, and the head cleaned, resurfaced and a valve job.
Installed Pistons:

Nice Clean Head:

Removed The butterflies from the Intake Manifold, cleaned the oil pan and valve cover, might paint the VC..
Waiting on a new timing chain/lower cover and a header to bolt it all back up and finally get it running again.

[Spaz882]

Well, I cut my ebay muffler off and welded a straight pipe where the muffler was (sounds like a box 4 when driving normal, but sounds better then the dang ebay muffler), getting rid of the cut and heated springs that the previous owner did and replace them with Eibach Spring tomrrow after work.

[Newman7John]

I installed auto meter water temp gauge and a all star performance oil catch can.

[MrDanguy]

Finally pulled the FSU... only snapped one bolt, OH THE RUST!

[tEknoS13]

Mounted my new RG2s on new tires. Stance coils sometime this week.

[24096]

FInished my 5speed swap on my 1996 base model black jdm kouki converted s14 with new clutch. . last item was to get power to my stock maf for my ka24de *4lyfe^. next is to install my vlsd which is ready. gonna get my exhaust welded today and run it to the smogshop. im BACK PEOPLE!!!! it's a GREAT DAY!!!!

[idahotuner]

put a new cas in, fixed a boost leak and avoided another ticket

[s13-t]

Went to weld up my IC piping only to realize that frsport had sent me aluminum instead of the stainless steel I ordered. lame.

[AntonioG]

Nothing "to" it, but I did do something "for" it. Ordered a set of wheels, 5lug conv kit and Z32 calipers.

[vas13hatch]

Yesterday-
https://www.youtube.com/watch?v=Qz33yK1noT0
Today-
https://www.youtube.com/watch?v=JudWutyKBZw

Finally got the engine all buttoned back up, next is the suspension, brakes and a paint job.

[scotty-2-forty]

Put it on eBay.

[Cruz23]

Striped the whole interior out and saw all sorts of rust. show i pay to get it welded or junk it?

[daemonyk]

Not really to, but certainly for my 240 - managed to get some work done to the RB today AND, I happened to notice that the oem oil pump I ordered and received, was upon later inspection, an N-1 oil pump. Upgrade! Today I got the new oil pump and timing parts on, as well as the valve covers, and reassembled the intake mani. Progress!

[mechanicalmoron]

Went to weld up my IC piping only to realize that frsport had sent me aluminum instead of the stainless steel I ordered. lame.

If you didn't send it back, you could probably braze it. Braze is win. You can join totally different metals.

You need a torch though.

[Hijacker]

I wouldn't trust brazing on a turbo piping application. That's just me.