What did u do to your Z today ???

[Rager]

put change in the change jar. Im up to almost 2 1/2 liters of change which im hoping to to over 300 bucks that will pay for my jdm tail lights

[NolimitZ32]

wiped the dust off her again, said goodbye and took off out of town for work for 2 weeks thereby delaying even further my engine pull ARGHHHHH!

[TTkickedin]

put change in the change jar. Im up to almost 2 1/2 liters of change which im hoping to to over 300 bucks that will pay for my jdm tail lights

Or http://www.nicoclub.com/archives/nissan ... ights.html

Nuttin better than 40$ Jspec tails Imma do it.

[Rager]

Ive seen that right up before, the problem with that is trying to get the clear plastic pattern to match up with the red plastic pattern and for it not to look cheep. if i went that way i would do clear on both the top and bottom. but since im not doing that and i dont want to drop 400 bucks out of my bank for tail light i figured saving change wouldnt be a hit to my pocket when it came time to purchase them (this spring) . and what i mean by "2 1/2 liters" is ive been filling empty soda bottles .:P

[300ZXttZMAN]

put change in the change jar. Im up to almost 2 1/2 liters of change which im hoping to to over 300 bucks that will pay for my jdm tail lights

Or http://www.nicoclub.com/archives/nissan ... ights.html

Nuttin better than 40$ Jspec tails Imma do it.

[TTkickedin]

Must I remind you that this IS the recession, Errbody broke?

Er, wait. I will make enough money to afford them. But I just dont want to!

Cost wise, thats JDM tail lights or 3 injectors out of the 6 needed...

Or DIY tails vs. Dinner for one night. I don't see the issue when they look exactly alike

[Rager]

Must I remind you that this IS the recession, Errbody broke?

Er, wait. I will make enough money to afford them. But I just dont want to!

Cost wise, thats JDM tail lights or 3 injectors out of the 6 needed...

Or DIY tails vs. Dinner for one night. I don't see the issue when they look exactly alike

thats why i am literally saving my pennies. i have been for almost 2 years. that way its like it almost cost me nothing other than my change from my pocket.

oh and they dont look exactly a like. there is a reason why many spend the 300+ for read JDM.

But i completely understand your reasoning for wanting the injectors first. trust me if i had maintenance to get done first i would. but right now i dont. I need adjustable suspension parts for my powertrix coil overs that have been sitting my garage since last spring . those will come with tax refunds !!!!!

[nsrZ32]

I looked at it in my garage, had the itch to drive it, then remembered it's winter.

[minlow88]

hotboxxed it lol

[TTkickedin]

^

I wrote "im Sad =(" on it's poor, dusty body yesterday

[bbbadboy316]

i looked at her said not yet soon though soon

[UberBricky]

hotboxxed it lol

Lol sweet

[aidssasin]

so i did what any caring father would do to her z, changed the water pump and accessories : D

but didn't get the vtc gears yet : [ hurry up tax return

[CRPZ]

Well, recently.. Got new tires, wheels, and lugs.. haven't put them on yet because the Z is getting worked on. 120k kit, plennum pull, and a whole bunch of other things getting done to it. Then I'm throwing the wheels on! I hope within the next month and a half or so, I'll have the JSpec fascia installed as well as the Twinz type 1 nose panel.

[CRPZ]

what-did-u-do-to-your-z-today-t493801.html

[300ZXttZMAN]

so i did what any caring father would do to her z, changed the water pump and accessories : D

but didn't get the vtc gears yet : [ hurry up tax return

Merged.

[300ZXttZMAN]

what-did-u-do-to-your-z-today-t493801.html

[Rager]

hotboxxed it lol

nice ! my buddy and i love drinking and then going out to the Z and burning one down. (theres no driving involved) except for random donuts in the lawn.

As for my Z, im going to drive up to vermont today and since its so warm out im gonna starter up , let her run for a while.

[BigTDogg (MA)]

hotboxxed it lol

LOL

Tomorrow I may actually touch her

While I wash and wax my other car

[TTkickedin]

I wouldn't hotbox it if i had cloth.


I am tempted to hotbox it then throw the ttops off and do a burnout to disguise the smell

If i still smoked, that is..

[300ZXttZMAN]

Thought about how awesome its going to be driving to work on saturday morning in the Z when I put her all back together.

[minlow88]

I wouldn't hotbox it if i had cloth.


I am tempted to hotbox it then throw the ttops off and do a burnout to disguise the smell

If i still smoked, that is..

I have blue leather lol.

[minlow88]

I did some vinyl wrappage.




And some hood sandage to get ready for some more vinyl wrappage

[CRPZ]

Well.... here's what Cory did to my Z in a week or so.

Full 120k kit including...
-Timing Belt
-Timing Belt Tensioner
-Water Pump
-Thermostat
-Coolant Bypass Hoses(2)
-VTC Springs(2)
-VTC O-rings(2)
-Cam Seals(4)
-Crank Seal
-Crankshaft Sprocket
-F&R Crankshaft Sprocket Washers
-Idler Pulleys(2)
-Idler Pulley Studs, Nuts, and Washers(2 each)
-RameyZ Idler Studs
-Coolant Bypass Connectors
-New OEM Nissan Drive Belts

Plenum and associated items...
-Plenum, Valve Covers and Coolant Hard Pipes removed and sent to shop for professional cleaning
-Throttle Body Coolant Lines and associated Hoses deleted
-Injectors and Fuel Rail removed, cleaned, new O-Rings and Insulators
-All Fuel Injection Hose replaced with Goodyear J30R9 Fuel Injection Hose
-All Connectors cleaned due to corrosion including Injectors, AAC, IACV etc.
-Intake and Exhaust Valve Cover Gaskets, Half-Moon Plugs, VTC Solenoids were all removed and sealed with High Temp Copper RTV
-New PCV Valves and ALL Hoses replaced with Silicone Hoses
-New Silicone IACV Hoses installed
-New Silicone Brake and Clutch Booster Hoses installed
-New Balance Tube O-Rings installed
-New Coil Pack Connectors installed
-Relocated PTU to under the Nose Panel and rewrapped Electrical Harness
-All New Silicone Vacuum Hose installed except for Boost Controller Hose to the Turbos (Didn't touch any of that. It will be replaced when the Engine is out)
-Fixed Power Lead by Battery with New Copper Connector
-Changed Engine Oil and Filter with Mobil One Synthetic 15w50 and Mobil One Oil Filter M1-208
-Radiator was Removed, Flushed, Cleaned and blew out all the crap in the Fins
-Fixed Driver Seat so it would go back all of the way
-Fixed Driver Mirror
-Cleaned Alternator
-Cleaned ENTIRE Engine Bay
-EVERY piece that was removed from the car was cleaned before it was put back in.

Deleted items...
-A/C Pump and Mounting Bracket
-A/C Condenser
-A/C Dryer
-All A/C lines from the Firewall forward
-Carbon Canister
-Carbon Canister Hard Line Tree
-EGR and all associated items deleted (not easy to do with the Engine in the car!) and Full EGR Delete Kit Installed
-EGR Solenoid and associated Hoses
-PRVR Solenoid, Vacuum Tank and associated Hoses
-AIV Solenoid and associated Hoses
-Both AIV units in the Fender Well
-OEM Intake Piping

[300ZXttZMAN]

Today my dad and I are going to pull the TT oil squirters and install the NA oil squirters i'll get pics so yall can see how it looks.

Also tonight me and my budds are going to start putting her together.

[TTkickedin]

^ schweet! Pics or ban yourself!

Got the carbon fiber hood last week.. will be needing to patch up a spot on it, but it will look clean. (had an aluminum hood but IDC, i like carbon fiber. And it does weigh only slightly less, believe it or not.)

[300ZXttZMAN]

^ schweet! Pics or ban yourself!

Got the carbon fiber hood last week.. will be needing to patch up a spot on it, but it will look clean. (had an aluminum hood but IDC, i like carbon fiber. And it does weigh only slightly less, believe it or not.)

I'll get pics tonight . Also the aluminum hood is OEM incase you didn't know.

[UberBricky]

PTU relocate, cutting/ scraping almost all of my sausage fingers along the way! Winter boredom has set in full force.

[UberBricky]

Drank 3 more beers, took off the "300ZX" stickers from my doors, and possibly worked out a deal to get my car painted for free! Hmmm...might have a couple more and see what happens next...

[300ZXttZMAN]

Thank god you took those stickers off hahaha. Good job