What did u do to your Z today ???

[a.blanco0905]

Bump. I washed my car... lol...

[Rager]

i finally got my new android x to run thru my system. lets just say it was a major pain in my arse.my old sh** rocking alpine, that i bought a couple of years ago need a 30 dollar adapter wire, which is fine. but spent more than 40 bucks on top of that trying to figure it out. either case it works and im happy.

Im even thinking about getting out of the garage next weekend and going for the first drive of the year . we still have snow here in vt but if the roads are ok......................

[Mr93z32]

I drove her all day!! lol t-tops off! Perfect weather! Oh yeah!

[300ZXttZMAN]

Bump cause this thread shouldn't die.

I looked at her just now in her dusty beauty and instantly got happy while thinking about how awesome its going to be when I put her all back together.

I am right working now but after work i'm moving my original engine to the front so I can take the accessories off in between answering the phone and helping customers while I work.

[TTkickedin]

I looked at her just now in her dusty beauty and instantly got happy while thinking about how awesome its going to be when I put her all back together.

I had a wet dream about mine

then realized she was still in the shop.. seeming to be indefinitely, while i continue to pay enormous amounts of money.

[z32pilot62]

Drove her and then she told me who was boss and s*** out an injector...

So now

[300ZXttZMAN]

Drove her and then she told me who was boss and s*** out an injector...

So now

LOL! That picture is awesome!

[whiteknight52]

I had to tighten the passenger side coilover today. I also had to clean out some wiring connections. Good times!

[TTkickedin]

^ I'll beat your rival times in forza with my virtual z?

[300ZXttZMAN]

I had to tighten the passenger side coilover today. I also had to clean out some wiring connections. Good times!

I hate green trolls camping in wires!

[DCaff300ZX]

Changed the oil (RPurple 10W30) and filter in the new TT, adjusted front nose panel to be flush with the hood and the rear hatch release so it works, fastened the loose PS window switch, added the DIN pocket Steve gave me and adjusted the cover/components to fit correctly, and epoxy'd the loosening leather wrap on the DS door panel prior to me making some arm rests to cover that area.

[300ZXttZMAN]

Changed the oil (RPurple 10W30) and filter in the new TT, adjusted front nose panel to be flush with the hood and the rear hatch release so it works, fastened the loose PS window switch, added the DIN pocket Steve gave me and adjusted the cover/components to fit correctly, and epoxy'd the loosening leather wrap on the DS door panel prior to me making some arm rests to cover that area.

Nice dave!

[whiteknight52]

Yeah, as far as those green gremlins in my wiring- I found out that they were the cause of my hesitation at 3k rpms. Little bastards were eating my horsepower!

[aroche25]

Changed the clutch fluid out to Motul RBF600, transmission fluid to Redline MT90 and the diff fluid to Motul 90PA LSD.

[300ZXttZMAN]

Took more off pieces off my motor.

[NolimitZ32]

Stared at it and wiped the dust off.

[TTkickedin]

I'll take pics of the cobwebs on mine, and post

[BigTDogg (MA)]

Brought mine to storage on Saturday. Sounds like dogg s*** with the boost leak and leaky exhaust. She's due for some TLC this spring.

[300ZXttZMAN]

Just opened up her door to get a smell her sweet luscious mild vanilla scent.

[whiteknight52]

Gave her a nice wash and next will be some O2 sensors. Yep, Im really lookin forward to that job. Bleh-

[NolimitZ32]

Got in, started her, let her warm up a little, revved her up a little, and instantly fell in love all over again. Can NOT wait till the turbine housings come in!!!

[DCaff300ZX]

Fabbed and installed a front license plate holder, installed new Fairlady Z and Twin Turbo stickers, did the cold weather fuel line tightening gig (got BOTH "bastard hose from Hell" clamps!!!), cleaned what little grunt I could find under the hood, and detailed the window trim. She's a SEXY beast...

[UberBricky]

Cruise control delete, AIV and PRVR delete, removed stock exhaust (first time under the car for a good look since I got her home, found a new looking transmission!), installed single cone airfilter and upper intake pipes (just the 4 small ones for now until I get a CZP kit), spark plugs, oil flush, then fresh oil.

[Z31toZ32]

Fabbed and installed a front license plate holder, installed new Fairlady Z and Twin Turbo stickers, did the cold weather fuel line tightening gig (got BOTH "bastard hose from Hell" clamps!!!), cleaned what little grunt I could find under the hood, and detailed the window trim. She's a SEXY beast...

pics on the license plate holder

[Z31toZ32]

on a side note, i cleaned mine up on friday after work to get ready to show off at Houston's cars and coffee, but then i unexpectedly got drunk and completely missed the event. at least my car is still clean.

[xclusivez32]

just bought some intercooler piping and z1 2.5 downpipes for my build for a decent price.

[DCaff300ZX]

Fabbed and installed a front license plate holder, installed new Fairlady Z and Twin Turbo stickers, did the cold weather fuel line tightening gig (got BOTH "bastard hose from Hell" clamps!!!), cleaned what little grunt I could find under the hood, and detailed the window trim. She's a SEXY beast...

pics on the license plate holder

OK, I'll try to get some posted soon

[300ZXttZMAN]

To see what I did to my Z Saturday/Sunday night Click Here (build thread)

[TTkickedin]

What I did was, paint my Tamiya z black metallic (first coat, but needs to be less metallic, will spray with "tint" spray to get desired effect.)

Pics will be up after work, and I did detail the rug/napkin mod for ya this time!

[300ZXttZMAN]

What I did was, paint my Tamiya z black metallic (first coat, but needs to be less metallic, will spray with "tint" spray to get desired effect.)

Pics will be up after work, and I did detail the rug/napkin mod for ya this time!

Good picture quality??