OEM Nissan / Infiniti parts

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

/\NISSAN

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

.akai wrote:1990 240SX hatchback:

Driver and Passanger side power window handle things, where the buttons are to make the windows go up and down. I need those, the handle and the buttons. the windsheild washer stick. and the driver console with the cruise control, emergency lights buttons, I forgets its name. thanks.

Driver switch- 25401-F6600 - $132.97Passenger switch - 25411-F6600 $29.38Washer switch - 25260-44F00 $44.56Console - 68260-40F00 - $92.94cluster lid - 68260-53F00 - $69.22

Let me know if I got everything.

John

Post by **.akai** » Thu Apr 15, 2004 7:22 am

(jd) wrote:Driver switch- 25401-F6600 - $132.97Passenger switch - 25411-F6600 $29.38Washer switch - 25260-44F00 $44.56Console - 68260-40F00 - $92.94cluster lid - 68260-53F00 - $69.22

Let me know if I got everything.

John

$132?!?! why so much, its just the buttons for the power windows and the trim around it. And is the console the area that goes around the radio, a/c, gear shift, and ashtray?

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

/\The buttons are part of the switch assembly.The cluster lid is the part that goes around the radio. The console is the part that goes around the shifter.

Post by **jdmfreak** » Thu Apr 15, 2004 7:22 am

Hey (jd) did you ever find out about the bracket?

Post by **SilviaSativa** » Thu Apr 15, 2004 7:22 am

I need more little stuff! Foam sealant for hood/hatch hingesand is there a rubber distributor gasket(between dist. cap and the dist)? Thanks!

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

jdmfreak03 wrote:Hey (jd) did you ever find out about the bracket?

Sorry I never got the email I don't know whats wrong.

Here is the two illusstraitions that I have.

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

SilviaSativa wrote:I need more little stuff! Foam sealant for hood/hatch hingesand is there a rubber distributor gasket(between dist. cap and the dist)?

Thanks!

Hood Seal - $16.42

Dist gasket - $4.74

Do you need the hatch weatherstrip to or the hatch hinges?

Let me know

John

Post by **jdmfreak** » Thu Apr 15, 2004 7:22 am

Thanks man. Ill show my father when he gets home.

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

/\ No problem anytime

Post by **frapjap** » Thu Apr 15, 2004 7:22 am

Output flanges compatible with a 300zx diff, but with the 240sx bolt pattern?

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

/\ Use flanges from an S14 vlsd they will work with the z31 vlsd diff.

LH 38220-52F01 $113.50RH 38220-92L00 $139.20

Post by **frapjap** » Thu Apr 15, 2004 7:22 am

THANKS! I just might be seeing you soon. How the shipping?

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

Ballpark around $9.00 for ground UPS.

Post by **RiceBurner98sC** » Thu Apr 15, 2004 7:22 am

Thanks for the great service on the floormats John. Curious to know the price if possible on a S14 VLSD

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

/\ $632.50 for the R200 assembly from motorsports.NISMO R-TUNE $721.17 OE LSD

They are both basically the same spec wise 70ft/lb breakaway touque with 30mm x 29 teeth side gears.

Post by **VA240** » Thu Apr 15, 2004 7:22 am

14052-21R00 AIV plug. I need two shipped to 23103.

Thanks!-VA240

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

^Shoot me an email this weekend and I'll get you taken care of on Monday.

Post by **VA240** » Thu Apr 15, 2004 7:22 am

(jd) wrote:^Shoot me an email this weekend and I'll get you taken care of on Monday.

Email sent!

-VA240

Post by **RiceBurner98sC** » Thu Apr 15, 2004 7:22 am

(jd) wrote:/\ $632.50 for the R200 assembly from motorsports.NISMO R-TUNE $721.17 OE LSD

They are both basically the same spec wise 70ft/lb breakaway touque with 30mm x 29 teeth side gears.

John thanks for the info...though I've been searching, do you know which of the Nismo units is a direct bolt on to the S14 non-lsd/non-abs 240's? I didnt want to have to change my flanges if possible, but I cant find accurate information as to which one bolts right in. Its a big decision in making sure I get the right one. I need it mainly for dragging.

Post by **Jookmasta** » Thu Apr 15, 2004 7:22 am

hey john, thanks for the super fast shipping for the starter and for the great customer service. id give ya another positive feedback had this been ebay. lol. also i sent back the starter so will i receive an email stating that the core charge is refunded or how is that done? also could i get a quote for some tan floormats for a 93 240sx se? also did nissan happen to make seat covers for the 93 240sx? and also i know this is a shot in the dark, but there werent any factory din 3 gauge holders for any 240sx was there?

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

VA240 wrote:Email sent!

-VA240

Got them ordered for you I should have them in a couple days.

thank you:)

Post by **TrunkMonkey** » Thu Apr 15, 2004 7:22 am

i have a 93 240sx convertible. i'm looking for prices for...

all the weatherstrippingwindshield garnish moldingcarpet (grey. interior only. trunk not needed)

-demetrius

Post by **msg** » Thu Apr 15, 2004 7:22 am

pricing for front and rear 5 lug hubs?

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

Jookmasta wrote:hey john, thanks for the super fast shipping for the starter and for the great customer service. id give ya another positive feedback had this been ebay. lol. also i sent back the starter so will i receive an email stating that the core charge is refunded or how is that done? also could i get a quote for some tan floormats for a 93 240sx se? also did nissan happen to make seat covers for the 93 240sx? and also i know this is a shot in the dark, but there werent any factory din 3 gauge holders for any 240sx was there?

No problem glad I could help out. I'll email you when I get the starter core credited and mail the copies to you.

Tan floor mats $51.00Sorry no factory seat covers.The 240's only had two meters available factory, fuel and water temp. To the best of my knowledge anyway.

I'll be in touch as soon as I get the core back.

Thank you

John

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

RiceBurner98sC wrote:John thanks for the info...though I've been searching, do you know which of the Nismo units is a direct bolt on to the S14 non-lsd/non-abs 240's? I didnt want to have to change my flanges if possible, but I cant find accurate information as to which one bolts right in. Its a big decision in making sure I get the right one. I need it mainly for dragging.

Still researching you're question on the direct bolt in lsd's.

Post by **VA240** » Thu Apr 15, 2004 7:22 am

John,

Can you get Canadian-spec S13 coupe b-pillars? These are for S13's with manual seatbelts. I'm looking for a brown set.

Thanks,-VA240

Post by **Jookmasta** » Thu Apr 15, 2004 7:22 am

so the floormats are in stock?

Post by **msg** » Thu Apr 15, 2004 7:22 am

o yah, by anychance can you get skyline parts as well?

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

Jookmasta wrote:so the floormats are in stock?

No I would have to order the floormats for you, and BTW I got the starter core back today so I will get you a credit headed to you in the mail.

John

OEM Nissan / Infiniti parts

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums