OEM Nissan / Infiniti parts

Post by **aix** » Thu Apr 15, 2004 7:22 am

hey i was wondering how much the radio trim and a new shift trim would cost for a 95 240sx

Post by **smokey240sx** » Thu Apr 15, 2004 7:22 am

hey john sorry for the late reply but isn't the nismo mounts for both ka and sr?

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

aix wrote:hey i was wondering how much the radio trim and a new shift trim would cost for a 95 240sx

Radio Trim - $37.05 Shift Trim - $17.92

Post by **silkk** » Thu Apr 15, 2004 7:22 am

do you have a coolant reservior for a 89 240sx?

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

^I don't but can have it here in a day.$68.29

Post by **silkk** » Thu Apr 15, 2004 7:22 am

why is it so expensive for a plastic bottle??

Post by **wangless** » Thu Apr 15, 2004 7:22 am

got anything for the floor mats yet ? '89 coupe, front two is just fine. thanks

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

silkk wrote:why is it so expensive for a plastic bottle??

Not sure why its so high there is nothing really special about it from what I can tell.

Post by **sivyisvaj** » Thu Apr 15, 2004 7:22 am

My mechanic said I need a new power steering rack. I think I found one on your website. How much is it? $121.XX? How come you guys are like $180-400 less than everyone else? Am I looking at the right part?

Post by **PalmerWMD** » Thu Apr 15, 2004 7:22 am

silkk wrote:why is it so expensive for a plastic bottle??

That has been an issue for a lot of S13 guysIts a common failure item too, so not too many used one available at all.

I guess they must have just made a limited number back in the day which drives up what Nissan charges the parts suppliers.

Fred..

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

sivyisvaj wrote:My mechanic said I need a new power steering rack. I think I found one on your website. How much is it? $121.XX? How come you guys are like $180-400 less than everyone else? Am I looking at the right part?

I see what you're talking about. The online catalog has a listing for a "rack" @ 121.46 but that is for the actual rack that is inside of the steering gear assembly. Click on "Steering Gear" over in the left category it is two down from "Rack".

Thats confusing

the way they have it listed in there.

You're rack is $985.00 < thats new not reman.

Post by **Diabel** » Thu Apr 15, 2004 7:22 am

I have the question about the carrier gasket for the VLSD from 1995 J30. I looked it up on your site and search pulls up two different types of gaskets:COVER GASKET, J30 - J30, M45, Q45 95-97 COVER GASKET, Q45 - J30, M45, Q45 95-01

Mine comes from the J30 with ABS.

Which one should I go with and what is the shipping?

THX

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

^Go with a 38320-40F02 you can just type that number in on the home page. I can send that priority mail 3.95

John

Post by **RbKouki** » Thu Apr 15, 2004 7:22 am

Hey I need a 97-98 front lip spoiler also what can you do??Please reply to

[email protected]

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

/\ Thank you... let me know when you are ready just call me at 888-998-9800 ext 2447.

John

Post by **ramrat** » Thu Apr 15, 2004 7:22 am

I am looking for rear calipers (both sides) for 92 240sx. How much would they be and what is the # for the on line catalogue? I couldn't find it in there.

Thanks!

Post by **jdmfreak** » Thu Apr 15, 2004 7:22 am

Alright I need this stuff for a 95 Maxima GXE

1) Rear exhaust section2) Spark plugs3) Struts 4) Water and radiator hoses5) Driver's side corner light.

Thanks. I appreciate your services.

Post by **VA240** » Thu Apr 15, 2004 7:22 am

Is there such a thing as a windshield gasket kit? I want to replace the rubber mouldings around my windshield and rear window when I paint my '92 S13.

Actually, I would like to replace all the rubber trim on the exterior of the car. Can you help?

Post by **jdmfreak** » Thu Apr 15, 2004 7:22 am

Where are ya man?

Post by **Jookmasta** » Thu Apr 15, 2004 7:22 am

hey i was wondering if you could give me a quote for a 93 240sx starter and steering boots and injector O [email protected]

also how much is shipping to 33330 or is shipping free or is there a special comin up soon?

Post by **VA240** » Thu Apr 15, 2004 7:22 am

jdmfreak03 wrote:Where are ya man?

Dohh! If you're referring to me I'm in 23103.

Sorry 'bout that!-VA240

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

ramrat wrote:I am looking for rear calipers (both sides) for 92 240sx. How much would they be and what is the # for the on line catalogue? I couldn't find it in there.

Thanks!

They will come up in the online catalog under the reman number.44011-35F01RE LH 212.00 + 60.00 core44001-35F01RE RH 212.00 + 60.00 core

Hope this helps you.

Thank you

John

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

jdmfreak03 wrote:Alright I need this stuff for a 95 Maxima GXE

1) Rear exhaust section2) Spark plugs3) Struts 4) Water and radiator hoses5) Driver's side corner light.

Thanks. I appreciate your services.

Let me know on the exhaust section there is an intermediate, muffler, and tip. I'll just quote you on them all.Intermediate - $187.49Muffler - $187.49Tip - $21.58Spark plugs $8.25 eachFrt Struts - $67.49 eachUpper Rad hose - $12.07Lwr Rad hose - $12.07Htr Hose Inlet - $12.07Htr Hose Outlet - $25.87Htr Hose Bypass to core - $8.36Corner lamp $47.68 (this is the lamp next to the headlamp) If you needed the one in the bumper let me know.

John

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

VA240 wrote:Is there such a thing as a windshield gasket kit? I want to replace the rubber mouldings around my windshield and rear window when I paint my '92 S13.

Actually, I would like to replace all the rubber trim on the exterior of the car. Can you help?

Yeah I can get you prices for everything. W/S rubber seal - $12.14W/S retainer $24.96W/S Moulding Set $119.13

Rear Window seal - $12.14Rear Retainer $24.97Rear Moulding Set $114.10

Let me know if I missed anything.

John

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

VA240 wrote:Dohh! If you're referring to me I'm in 23103.

Sorry 'bout that!-VA240

Naw he was talking about me I was MIA all weekend:D

Post by **VA240** » Thu Apr 15, 2004 7:22 am

(jd) wrote:Yeah I can get you prices for everything. W/S rubber seal - $12.14W/S retainer $24.96W/S Moulding Set $119.13

Rear Window seal - $12.14Rear Retainer $24.97Rear Moulding Set $114.10

Let me know if I missed anything.

John

If there is any side window rubber moulding/trim, I'm interested as well. Side door seals, etc. I'll go look at the car this afternoon and see what all is on the car and can be replaced.

Thanks for the help. I'll get my complete list and I'll be ordering soon!

-VA240

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

Jookmasta wrote:hey i was wondering if you could give me a quote for a 93 240sx starter and steering boots and injector O [email protected]

also how much is shipping to 33330 or is shipping free or is there a special comin up soon?

Starter - $130.50 $50.00 COREBoots $12.13 eachUPR oring $.52LWR oring $1.01

I can ship these for $3.95

Let me know

John

Post by **cf1203** » Thu Apr 15, 2004 7:22 am

can you give me a price for a set of rings and rod bearings for a 93 sentra se-r including shipping. im not sure if you can get the synchronizers for the sr20det tranny, but if you can a price on them.

Post by **Jookmasta** » Thu Apr 15, 2004 7:22 am

so everything would only cost 3.95 to ship? get back to me [email protected]

thanks

Post by **jdmfreak** » Thu Apr 15, 2004 7:22 am

Yea sorry I maent the one in the bumper.

OEM Nissan / Infiniti parts

Power Steering Rack...

Re: Power Steering Rack...

Carrier gasket for 1995 J30

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums