OEM Nissan / Infiniti parts

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

reccakun08 wrote:i didnt get a chance to check the dealer price on wheellocks since its sunday today but let me know when you get the price and shipping for everything (wheel locks/lug nuts/studs) thanks.

Wheel stud 43222-70T00 $1.13 EACHWheel nut 40224-V5510 $2.03 EACHLock kit 999H1-A7003 $21.75

I can ship them priority mail for $3.95

Let me know if I can help with anything else.

John

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

jdmfreak03 wrote:OEM 95 Maxima GXE front bumper

F2022-40U25 $155.38

Let me know if I can help with anything else.

John

Post by **discusfa** » Thu Apr 15, 2004 7:22 am

1998 Nissan 240sx LEWhat's part no and price on manual transmission drain plug , filler plug, differential filler plug, and drain plug. Also part no and price on the 3 nuts for top of the front strut

1991 Nissan 240sx LEWhat's part no and price on the 2 nuts for the top of the rear strut.

thanks

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

/\Trans drain plug 32103-U8400 $5.26Trans fill plug 31306-65F00 $1.63

Diff drain plug 32103-U8401 $5.53Diff fill plug 00931-2121A $1.81

Strut mount nuts 01225-00231 $0.64 each

__________________________-

RR strut top nuts 01225-00102 $0.55 each

Let me know if I can help with anything else.

John

Post by **discusfa** » Thu Apr 15, 2004 7:22 am

I have 1998 240sx LE. How do I tell if I have vlsd or not

Post by **jdmfreak** » Thu Apr 15, 2004 7:22 am

How much would that bumper be shipped to 12533.

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

/\The fascia exceeds the 130" lenght and girth to go fedex or ups ground so freight is gonna throw me out of the running to sell it. Cheapest way I can send it is Motor carrier @ 150.00

Sorry

Post by **jdmfreak** » Thu Apr 15, 2004 7:22 am

Gah! Damn this sucks. $155.38 for bumper+$150 for shipping+cost of paint=:(

Post by **reccakun08** » Thu Apr 15, 2004 7:22 am

(jd) wrote:Wheel stud 43222-70T00 $1.13 EACHWheel nut 40224-V5510 $2.03 EACHLock kit 999H1-A7003 $21.75

I can ship them priority mail for $3.95

Let me know if I can help with anything else.

John

should i email you to order or call?

52.32 should be the total for (2 studs, 12 wheel nut, and locks + shipping)

im ready to order let me know.

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

Call or email 888-998-9800 ext 2447 [email protected]Or use our website and create an account there. http://www.nissanparts.org

John

Post by **radcorenissan240sx** » Thu Apr 15, 2004 7:22 am

hey jd, how much do you think i could get a pair of stock OEM fenders for my 1990' 240sx?

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

(jd) wrote:Call or email 888-998-9800 ext 2447 [email protected]Or use our website and create an account there. http://www.nissanparts.org

John

Thank you for the order:ylsuper Parts are sent!

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

jdmfreak03 wrote:Gah! Damn this sucks. $155.38 for bumper+$150 for shipping+cost of paint=:(

Sorry man:mad:

Post by **IveBeenBad** » Thu Apr 15, 2004 7:22 am

hey jd. how much for a 1990 240sx pass side fender

Post by **reccakun08** » Thu Apr 15, 2004 7:22 am

Cool cool... order from john great guy. Talked to him on the phone and the order went smoothly, and guess what no waiting on the phone. Just waiting for the order thanks for the service.

Btw i forgot when you said they would arrive?

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

/\You should have the parts Tuesday or Wednesday at the latest.

Post by **VA240** » Thu Apr 15, 2004 7:22 am

How about a leather steering wheel and shift knob for a 92 240sx SE?

Thanks,-VA240

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

IveBeenBad wrote:hey jd. how much for a 1990 240sx pass side fender

Fender is $182.07

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

VA240 wrote:How about a leather steering wheel and shift knob for a 92 240sx SE?

Thanks,-VA240

Leather wheel $546.07 ouch! (does not include pad)Shift knob $92.33

Post by **d-wade** » Thu Apr 15, 2004 7:22 am

Jd- Can you get the moonroof trim piece that holds the weather-strip onto the glass? Also need the strut mount nuts for all four corners.ThanksEric

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

/\I forget is your moonroof a power slide or a manual pop up? Also on the strut mount nuts do you just need the top nuts for all of the struts?

Let me know.Thank you

John

Post by **d-wade** » Thu Apr 15, 2004 7:22 am

(jd) wrote:/\I forget is your moonroof a power slide or a manual pop up? Also on the strut mount nuts do you just need the top nuts for all of the struts?

Let me know.Thank you

John

The moonroof is a power slide. Yes, I would like all the mount nuts for the top of the struts.

Post by **blu240hch** » Thu Apr 15, 2004 7:22 am

Hey John, just wanted to say thanks for hooking me up and getting the part to me asap!I talked to you on the phone and had the injector and coolant temp sensor overnighted last tuesday or wednesday... I forget. One thing that was missing was an upper o-ring... I received the lower one but no upper, once I replaced the crusty old one it worked like a charm. :thumbup

These guys rock!

Post by **radcorenissan240sx** » Thu Apr 15, 2004 7:22 am

hey jd, i need a left fender for my 1990' 240, but if i replace that one, i might end up replacing the right one too. if i can find some that look diffrent than stock (other than the wide-body) i would replace both, and was hoping that maybe you had some, but if you didnt how much could i get just the left fender for?

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

d-wade wrote:The moonroof is a power slide. Yes, I would like all the mount nuts for the top of the struts.

The nuts are .30 each.

Need some more help from you to be sure about the roof part, here is an illusstration.

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

blu240hch wrote:Hey John, just wanted to say thanks for hooking me up and getting the part to me asap!I talked to you on the phone and had the injector and coolant temp sensor overnighted last tuesday or wednesday... I forget. One thing that was missing was an upper o-ring... I received the lower one but no upper, once I replaced the crusty old one it worked like a charm. :thumbup

These guys rock!

Glad to hear that you got fixed up, I am sorry you were missing an o-ring next time you order something remind me about it and I'll hook ya up to make up for our mistake.

John

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

radcorenissan240sx wrote:hey jd, i need a left fender for my 1990' 240, but if i replace that one, i might end up replacing the right one too. if i can find some that look diffrent than stock (other than the wide-body) i would replace both, and was hoping that maybe you had some, but if you didnt how much could i get just the left fender for?

Just the fender is 180.00 but to be honest the shipping cost is going to eat up just about all of the discount as the retail price is 250.00. Only ones I have are the stockies

Let me know if I can help with anything else.

Post by **d-wade** » Thu Apr 15, 2004 7:22 am

(jd) wrote:The nuts are .30 each.

Need some more help from you to be sure about the roof part, here is an illusstration.

The trim piece is actually visible from outside of the car. Its held to the top of the moonroof glass with double sided tape. I'll get a picture this weekend.

Post by **(jd)** » Thu Apr 15, 2004 7:22 am

Ok you probably need the welt, its inside the car and matches the interior trim color. $41.55 PN 73967-65F01 for black.

Post by **Tsukai240** » Wed Sep 08, 2004 4:24 am

i just want to make shure that you are still giving a 25% discount. i need a cooling fan (blade), fan clutch, and water pump for my 91 240sx se. what would be my shiped total to 77006. Thank you very much.

OEM Nissan / Infiniti parts

VLSD

25%??

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums