a$$ed-out of CA18DET motors?

[sonorous986]

If you're looking for just a motor, I can probably squeeze you one for around $750-$850. I won't know the exact price unitl they get here, but shouldn't exceed my quote. Complete motorsets are $1450 and shipping is around $120-$180 depending on your location.

Dee

i'm up in Orlando, so I could probably drive down and get it, or if not the shipping wouldn't be too much i'd assume. also, what all will I need to get if I buy just the motor, and how much would it all cost approx.? would it be best if I just bought a complete motorset, would that be cheaper in the longrun?

[boost_boy]

Quote »would it be best if I just bought a complete motorset, would that be cheaper in the longrun?[/quote] If you don't have a CA18 already, I recommend going for the complete set. It may get very expensive to piece this stuff together..

Dee

[sonorous986]

If you don't have a CA18 already, I recommend going for the complete set. It may get very expensive to piece this stuff together..

Dee

alright, thanks for the info. ill keep all that in mind when i start pricing this stuff and getting the money together. also, do you have any FWD SR20DETs (U12 bluebird redtop works), and how much?

[chivas]

Dee,

can you email me? i have some questions regarding a motor for my 87 stanza. it's not too pretty looking and it's not fast at all so it's a perfect sleeper. yes, i use to have a 300ZX TT with mods and this stanza's CA20E is not acceptable unless you can get worth while mods for it (CA18 manifolds and turbo... hum..).

Anyways, if you can shoot me an e-mail and help me out, i'd really appreciate it.[email protected]

Dan

[Teerawood]

Hey Mr.

I freind told me that you could get a full motor set to 22312(northern va) for only 1500... do you have any ca18det avalable? i am very intrested my aol screen name is teerawood. you can IM me or talk to me on here.. thanks!

[JustinStrife]

I think he'll have motorsets this month or in April I can't remember when...

But Dee is the man to talk to about the almighty CA.

[spindrift187]

im also looking into getting one of your CA18DET motorsets(Manual). Id be buying sometime in April and would like some info on what it all comes with. Also is there a FAQ section on this board regarding the CA?

[zEy]

Hey boost_boy, in two months when you receive your shipments of those ca18det's let me know I'll take one off your hands! I'll fly down and rent a uhaul van.

But I need some prices I want it refreshed and ready for a beating. You know rings, rods, whatever needs to be upgrade. I want everything for it though. Let me know what you can't get, that I need.

Hit me up on aim if you have it. Aim: zey0r

[s1mpl3m1nd]

hey boostboy...i'm looking for a ca18det motor or motor and transmission...dont need anything else..i tried to pm u but it wouldnt let me...drop me a email at [email protected] or im me at s1mpl3m1nd..thanksben

[float_6969]

welcome to the THREAD THAT WON'T DIE!!!!

[240 Trainee]

welcome to the THREAD THAT WON'T DIE!!!!

I know. Go figure :freak

[spindrift187]

Also is there a FAQ about the CA in this forum?

[chivas]

i just want a CA18DET FWD 5 spd or even auto but it's gotta be a full clippy thing with ECU and harness. i just drove 140 miles around NJ's highway and 97 ponies are ok for a drive but leaves the excitment at home.Just update us on anything yuo get in boost_boy (dee). thanks!!!

and NO, i will not let this thread die until i get a motor! :-D

[boost_boy]

You prefer it in FWD? Or is it an auto or whatever?

Dee

[Teerawood]

hey boostboy...i'm looking for a ca18det motor or motor and transmission...dont need anything else..i tried to pm u but it wouldnt let me...drop me a email at [email protected] or im me at s1mpl3m1nd..thanksben

Hey dee me and been live pretty close to each other.. is there a way we can save on shipping if we get out motor sets shipped together?

[Teerawood]

Oh yea.. as i stated... i need ca18det RWD.. motor set.. with SMIC if possible

[boost_boy]

Quote »Hey dee me and been live pretty close to each other.. is there a way we can save on shipping if we get out motor sets shipped together?[/quote] Weight is always the factor and shipping to you guys is cheap anyways. But some adjustments can be made if 2 motor sets are purchased.

Dee

[chivas]

Dee: i have an 87 stanza. i want to make it a sleeper but i really don't want to go thru the insane hassle of getting a sattle gas tank just so i can clear a drive shaft so i need a FWD CA18det. i have no preferance as to which transmission but if you can get one with a 5 spd complete, that'll be great. i really don't feel like going to a junk yard to look for parts of a manual transmission since the one by me (Shea Stadium) is a little overwhelming. thanks!

[boost_boy]

If you have an 87 stanza and it's 5 speed, you can use your existing transmission and axles, but you will need to use the long axle bracket attached to your motor or one off a pulsar. What are you going to do for wiring because I do have a motor for you right now (It's my standby motor for my G/F's car). I do have a readily available JWT ECU set up for 550cc injectors, Z32 AFM and a 3 bar map program that I can sell to you for a decent price. My friend just imported an AWD CA18DET with harness and computer, but the harness got crushed and now the kid's in trouble and want$ me to do the rewiring$ or he may opt for my set-up using a pulsar's CA18DE harness. Let me know if you're interested.

Dee

[r34 gtr]

dee, i think youre the last person that should be trying to sell a JWT ecu..

- tim

[Bizz]

So were there any RWD motors with the awd shipment or was it a one off thing?

[boost_boy]

Quote »So were there any RWD motors with the awd shipment or was it a one off thing?[/quote] Zilch! And that AWD motor belong to another customer that already prepaid for it. The only thing is he wants me to do the install in a car that requires cutting and welding and he doesn't even have half the stuff needed to make this work. We'll see what's coming from one of my other friends.

Quote »dee, i think youre the last person that should be trying to sell a JWT ecu..[/quote] Some people could care less about my opinions. Bottom line is some people also think the JWT is the god of Nissan programming, so I extend my JWT ecu which is no longer in use in my cars. I've sold one already to a guy in California that was set up for the standard injectors.

Dee

[Teerawood]

When will you have new sets od ca18det's? how can i contact you when u do have them.. how do i pay... i need some info... gotta website or anything?

[boost_boy]

There's a few motors here and there if anyone needs them. So technically and as for now, not @$$ed anymore

Dee

[chivas]

Dee, did you get my reply? Gawd damn at&T!

[Bizz]

Any clips for under 1500?

[WeldingHank]

whats a CA18DET clip from a silvia/180sx going for these day?

[craigcd]

Im looking for a CA18det boost boy. If you could email me that would be great. My PM's arent working?????

*REDACTED*

[boost_boy]

Quote »whats a CA18DET clip from a silvia/180sx going for these day?[/quote] About $1700, but that clip is not even in the U.S. as of yet.

Dee

[boost_boy]

Quote »Any clips for under 1500?[/quote] Complete motorsets are, but not complete clips.

Dee