so this thingy seem to broke... help please (56k get your *** in here) | First < 1 2 3 4 5 6 > Last |
|
| Author |
Post |
2ndnissan
Offline
691 posts
1990 240sx hatch
sebring fl
11-5-2007
|
| « Re: so this thingy seem to broke... help please (SketchyRollin564) | 5:04 PM 5/16/2008 |
|
More than likely you'll need a motor. You could tap that one and maybe jar something loose but electrical motors have windings or bushings that wear out. It should make some kind of noise when you move the switch to different positions. A tap isn't going to keep it going .
|
SketchyRollin564

Offline
3648 posts
1995 240sx with b16 swap and nos
Boca Raton, South Florida
3-24-2007
|
| « Re: so this thingy seem to broke... help please (2ndnissan) | 6:13 PM 5/16/2008 |
|
so for sure its a new motor that i need? damn haha thats gonna be expensive... im gonna have to find the part nujmberi dont want to buy one at the junkyard ijf that might be dead as well, or about to die. Am i fine if i just go to the dealer and ask to get one, but i install it myself?

|
redtop91
Meat Gazer

Offline
16404 posts
↑ ↑ ↓ ↓ ← → ← → B A Start
Broken Arrow OK
9-7-2006
|
| « Re: so this thingy seem to broke... help please (SketchyRollin564) | 6:22 PM 5/16/2008 |
|
My arms are WAVES of LIGHTNING!
|
2ndnissan
Offline
691 posts
1990 240sx hatch
sebring fl
11-5-2007
|
| « Re: so this thingy seem to broke... help please (SketchyRollin564) | 6:25 PM 5/16/2008 |
|
Check with the courtesy nissan site that has been mentioned several times on here. Locals will probably be higher on price. That's if you're sure you want new. Is there a part # on the one you have? Let me know what is and I'll check it against anything I find tomorrow. I'm not even sure the parts still available new. You might check a local just to get part #and availability though. They will sell parts that they don't put in themselves. I've even had them print up FSM pages for me in the past.
|
PorkChopExpress

Offline
569 posts
rb kouki
West Palm Fl
3-24-2007
|
| « Re: so this thingy seem to broke... help please (2ndnissan) | 7:11 PM 5/16/2008 |
|
take if out and give it a good lookin at. thats kinda a low usage part ,maybe it just jumped off the tracks. let me know if you go to the junk yard, i need a bunch o parts. we can carpool. your mom can drive us.
im goin to be around the palmatto and 441 area for a little while.
Never let a stripper clog dance near your dingle.
|
SketchyRollin564

Offline
3648 posts
1995 240sx with b16 swap and nos
Boca Raton, South Florida
3-24-2007
|
| « Re: so this thingy seem to broke... help please (redtop91) | 10:24 PM 5/17/2008 |
|
| Quote, originally posted by redtop91 » | | My arms are WAVES of LIGHTNING! |
|
redtop91
Meat Gazer

Offline
16404 posts
↑ ↑ ↓ ↓ ← → ← → B A Start
Broken Arrow OK
9-7-2006
|
| « Re: so this thingy seem to broke... help please (SketchyRollin564) | 10:26 PM 5/17/2008 |
|
Sorry man I couldn't resist. I start crying laughing to this day when I think about it. No more threadjacking from me. Bump for you.
|
SketchyRollin564

Offline
3648 posts
1995 240sx with b16 swap and nos
Boca Raton, South Florida
3-24-2007
|
| « Re: so this thingy seem to broke... help please (PorkChopExpress) | 10:27 PM 5/17/2008 |
|
| Quote, originally posted by PorkChopExpress » | | take if out and give it a good lookin at. thats kinda a low usage part ,maybe it just jumped off the tracks. let me know if you go to the junk yard, i need a bunch o parts. we can carpool. your mom can drive us.
im goin to be around the palmatto and 441 area for a little while. |
palmetto and 441? i live like right there lol but pshhh, you have an RB powered kouki, id rather ride in that ***** i guess i can try to take that part out, but its a ***** to get into that area, even with my fcking seat out
anyways, lemme go look at it and see if i can even get it out or anything
|
SketchyRollin564

Offline
3648 posts
1995 240sx with b16 swap and nos
Boca Raton, South Florida
3-24-2007
|
| « Re: so this thingy seem to broke... help please (2ndnissan) | 10:52 PM 5/17/2008 |
|
| Quote, originally posted by 2ndnissan » | | More than likely you'll need a motor. You could tap that one and maybe jar something loose but electrical motors have windings or bushings that wear out. It should make some kind of noise when you move the switch to different positions. A tap isn't going to keep it going . |
this dude was telling me his passenger window motor stopped working, so he took it out, opend it up, and spun it around, and when he put it back in it was working again... so im thinking i might not NEED to replace it
|
PorkChopExpress

Offline
569 posts
rb kouki
West Palm Fl
3-24-2007
|
| « Re: so this thingy seem to broke... help please (SketchyRollin564) | 10:55 PM 5/17/2008 |
|
may be livin down there for a little bit so you should see my black beater scootin around town. it only gets harder. a simple fpr removal for me changed into me yelling and throwing tools. still havent fixed it.
|
SketchyRollin564

Offline
3648 posts
1995 240sx with b16 swap and nos
Boca Raton, South Florida
3-24-2007
|
| « Re: so this thingy seem to broke... help please (PorkChopExpress) | 11:17 PM 5/17/2008 |
|
you consider an RB kouki a beater? pshhh.. is it bone stock looking SE? i mighta saw it today on the way to the skatepark with my friendsmy friends like "yo anthony look its your favorite car!" by sandal foot turning from 441 onto orial country road? i was trying to catch up to you and was freaking out when i saw that **** lol that you?
|
PorkChopExpress

Offline
569 posts
rb kouki
West Palm Fl
3-24-2007
|
| « Re: so this thingy seem to broke... help please (SketchyRollin564) | 11:31 PM 5/17/2008 |
|
nope lowered on steelies. dont drive it to far cause it doesnt have insurance or exhaust, or vacuum to brake booster.
|
SketchyRollin564

Offline
3648 posts
1995 240sx with b16 swap and nos
Boca Raton, South Florida
3-24-2007
|
| « Re: so this thingy seem to broke... help please (PorkChopExpress) | 11:35 PM 5/17/2008 |
|
haha damn never seen it, which is wierd cause i live right on ponderosa by palmetto, and im always outhow the hell do you afford a kouki and an RB, but not insurance, exhaust, or anything haha hit me up on aim - sketchyrollin564
|
sebazztard

Online
2544 posts
1992 rb25 powered 240sx hatch, 1990 nissan 240sx SE hatch - DD
ny
3-2-2007
|
| « Re: so this thingy seem to broke... help please (SketchyRollin564) | 12:28 AM 5/18/2008 |
|
so this just slowly stopped working at its own free will or just STOPPED? either way, i suggest getting an fsm and learning how to use it. all your answers are in it.
 1992 Nissan 240sx Hachback - Project (rb25det) 1990 Nissan 240sx Hatchback SE - DD need misc s14/s13 5 speed stuff ? http://forums.nicoclub.com/zer...n-abs
|
SketchyRollin564

Offline
3648 posts
1995 240sx with b16 swap and nos
Boca Raton, South Florida
3-24-2007
|
| « Re: so this thingy seem to broke... help please (sebazztard) | 12:37 AM 5/18/2008 |
|
i cant figure out how to use the downloadable FSM its wierd as hellpluis what section would you go to to find this ****?
|
sebazztard

Online
2544 posts
1992 rb25 powered 240sx hatch, 1990 nissan 240sx SE hatch - DD
ny
3-2-2007
|
| « Re: so this thingy seem to broke... help please (sebazztard) | 12:38 AM 5/18/2008 |
|
btw, i'll be glad to help you out, add me on yahoo messenger, my ID is xxp_sebby . i'll transfer over the fsm for ya if you'd like...
|
sebazztard

Online
2544 posts
1992 rb25 powered 240sx hatch, 1990 nissan 240sx SE hatch - DD
ny
3-2-2007
|
| « Re: so this thingy seem to broke... help please (sebazztard) | 12:39 AM 5/18/2008 |
|
HA , heating and a/c
|
SketchyRollin564

Offline
3648 posts
1995 240sx with b16 swap and nos
Boca Raton, South Florida
3-24-2007
|
| « Re: so this thingy seem to broke... help please (sebazztard) | 1:57 PM 5/18/2008 |
|
i dont have yahoo, but my AIM is sketchyrollin564
|
SketchyRollin564

Offline
3648 posts
1995 240sx with b16 swap and nos
Boca Raton, South Florida
3-24-2007
|
| « Re: so this thingy seem to broke... help please (SketchyRollin564) | 2:57 PM 5/18/2008 |
|
Ok so i was messing with this again today, was pushing around the little arms and stuff and watching things move to see how it all workedi turned the car on again, and noticed this id hit the button to make it go to only the face... silent button to make it go only to feet (which is currently the only vent open).. silent but when i hit the button to make it go to both the face and the feet... i heard a little click, and nothing else after that it wasnt loud, and nothing moved (not even a little), but just a tiny little click noise could this mean anything, or help in any way to figure out what the problem is?
|
SketchyRollin564

Offline
3648 posts
1995 240sx with b16 swap and nos
Boca Raton, South Florida
3-24-2007
|
| « Re: so this thingy seem to broke... help please (SketchyRollin564) | 3:11 PM 5/18/2008 |
|
ok so i went back out to the garage 5 minutes after posting that, and noticed somthing else as wellwhen i hit the button to make it go to the windows (the one on the right, with the red light on the bottom instead of green), the door for the foot vent closes up, and when i click the thing to go to the foot again, it open back up BUT, for some reason, it still wont open up the door for the vents that go to your upper body
so... i guess the motor still works (or part of it does?) and somthing else is the problem... anybody got anything?
|
SketchyRollin564

Offline
3648 posts
1995 240sx with b16 swap and nos
Boca Raton, South Florida
3-24-2007
|
| « Re: so this thingy seem to broke... help please (SketchyRollin564) | 4:59 PM 5/18/2008 |
|
bump?i really dont think the motor, if it partially works
|
SketchyRollin564

Offline
3648 posts
1995 240sx with b16 swap and nos
Boca Raton, South Florida
3-24-2007
|
| « Re: so this thingy seem to broke... help please (SketchyRollin564) | 9:07 PM 5/18/2008 |
|
bump cause im really excited but nobody posted
|
spooled240
half JDM tYtE yO!

Offline
5122 posts
'97 red ess-one-four
califckedupfornia
1-20-2007
|
| « Re: so this thingy seem to broke... help please (SketchyRollin564) | 9:37 PM 5/18/2008 |
|
| Quote, originally posted by SketchyRollin564 » | this dude was telling me his passenger window motor stopped working, so he took it out, opend it up, and spun it around, and when he put it back in it was working again... so im thinking i might not NEED to replace it |
who me? but yeah that is what happened to me, I think the electric motor got seized and needed a "jump start" bump I'll talk to you on aim, it's much easier.
Shift_ inspiration
 Want a custom grill for your kouki s14?
|
spooled240
half JDM tYtE yO!

Offline
5122 posts
'97 red ess-one-four
califckedupfornia
1-20-2007
|
bump numero dos-motor works so that is out of the question, it is definitely a CONNECTION issue I'd say...I would look for fried wires, circuits or fuses going to the motor and the buttons that DON'T work. Also a short circuit somewhere would pop fuses and mess things up.
|
SketchyRollin564

Offline
3648 posts
1995 240sx with b16 swap and nos
Boca Raton, South Florida
3-24-2007
|
| « Re: (spooled240) | 10:17 PM 5/18/2008 |
|
sweet, but im not too good with electrical stuff so i dont know what most of that meansanyone wanna help out here? lol
|
spooled240
half JDM tYtE yO!

Offline
5122 posts
'97 red ess-one-four
califckedupfornia
1-20-2007
|
maybe it's something simple as a piece of dirt or something just not allowing some of the doors to open/closeif I were in your position, I would just start taking the whole thing apart and dig deeper for some fried wires, etc...If you do decide to take it apart make sure you don't lose any screws and have a good idea of how it goes back together. You might not want to do this but, I'm just saying if it were me.
|
SketchyRollin564

Offline
3648 posts
1995 240sx with b16 swap and nos
Boca Raton, South Florida
3-24-2007
|
| « Re: (spooled240) | 7:19 PM 5/19/2008 |
|
i doubt it, the motors gotta have enough torque to move past a piece of dirti would start taking it apart, but to play around with tht motor holy **** its the most uncomfortable position ever, plus its attached to so much stuff so id have to really know what im doing what i dont get though... the motors not dead, because itl move the foot door, but it wont move the door for the duct that goes to the upper body
any other ideas on what the problem might be?
|
brizanden

Offline
5511 posts
thrased kouki ftw
Cbus oh
4-30-2007
|
| « Re: (SketchyRollin564) | 7:26 PM 5/19/2008 |
|
i got one: give up and take it to ur family mechanic or a car a/c specialist

| Quote, originally posted by Hijacker » | [img] hello! long time browser! first time poster! I am a true nikonut. i like to wrench on shocks, and try to get on jesda slacks. I am cool like you, please show me your teenage girls! |
| Quote, originally posted by adrians_s13 » | | I went faster MPHs than my speedometer shows... I can only assume I went 300mph. |
| Quote, originally posted by Razi » | Dittoz, wanna smell my napkin?  |
350z wheels x2 sets s14 megan header and downpipe
|
Kckouki
NICO's Resident Dumbass

Offline
7634 posts
'97 240sx
Knoxillist TN
10-7-2006
|
Like, ditch the AC, gain some HP.
Shift _ Your own damn gears. 
|
SketchyRollin564

Offline
3648 posts
1995 240sx with b16 swap and nos
Boca Raton, South Florida
3-24-2007
|
| « Re: (Kckouki) | 7:50 PM 5/19/2008 |
|
pshhhhh F thatyou know where i live? i live in FLAWDA!!! YEAH SON!!!!! but on the real... hell no, its wayy to ****ing hot and humid in florida, specially in the summer. And i dont wanna hve to payu $12,500 just to have my AC fixed, so no thanks
i already got this far, so im sure theres sombody on here who can give some advice on what to do next
|
SketchyRollin564

Offline
3648 posts
1995 240sx with b16 swap and nos
Boca Raton, South Florida
3-24-2007
|
| « Re: (SketchyRollin564) | 4:02 PM 5/20/2008 |
|
bump again haharecap so people dont have to keep scrolling through found out the motor works, ill hit the buttons for the window (on the right), and itl close the door for the feet, and then ill hit the feet button, and itl open it back up again. still wont move, or even make any noise when i hit the buttons to move the door for the duct that shoots air to the upper body.... SOOOO, i know the motors still working, but somthings wrong, and i have no idea what it might be
whos got any ideas?
|
kornaz

Offline
2221 posts
95 240sx SE, 06 Gixxer 750.
LA CA
11-10-2005
|
| « Re: (SketchyRollin564) | 6:13 PM 5/20/2008 |
|
Check the connections to buttons, etc. Might a bad connection. OR, take apart the HVAC thingy, it worked for me for a lighting problem.
The best engine in the world is the vagina, it takes any size piston, its self lubricating, starts with 1 finger, and every 4 weeks does its own oil change. It's just a pity the management system is so f***ing temperamental.

|
SketchyRollin564

Offline
3648 posts
1995 240sx with b16 swap and nos
Boca Raton, South Florida
3-24-2007
|
| « Re: (kornaz) | 6:15 PM 5/20/2008 |
|
By connection to the buttons do you mean just the big plug that goes in, or do you mean actually taking apart the thing and looking at the button?
|
kornaz

Offline
2221 posts
95 240sx SE, 06 Gixxer 750.
LA CA
11-10-2005
|
| « Re: (SketchyRollin564) | 6:20 PM 5/20/2008 |
|
Try to folow the wires where they go, and check all the connections.
|
SketchyRollin564

Offline
3648 posts
1995 240sx with b16 swap and nos
Boca Raton, South Florida
3-24-2007
|
| « Re: (kornaz) | 6:23 PM 5/20/2008 |
|
So are you saying the connection from the car plug to the unit, or connection inside the unit?
|
motoman399

Offline
1064 posts
95' not so beater 240 and 98' wrecked (rhd coming soon) 240
eureka ca
10-10-2006
|
| « Re: (SketchyRollin564) | 7:24 PM 5/20/2008 |
|
get a test light and test the wires to the motor. and push buttons... lol get a test light and learn how to use it. they do wonders

|
kornaz

Offline
2221 posts
95 240sx SE, 06 Gixxer 750.
LA CA
11-10-2005
|
| « Re: (SketchyRollin564) | 7:37 PM 5/20/2008 |
|
| Quote, originally posted by SketchyRollin564 » | | So are you saying the connection from the car plug to the unit, or connection inside the unit? |
Both. Also, what motoman said.
|
Dattebayo
Jinchurriki

Offline
20149 posts
S12 w/ VG30E
DC Metro Area
8-25-2002
|
Seriously dude, why don't you just try a new A/C control unit. What exactly makes you so sure its the actuator anyway? Electronics will break before mechanized stuff will obviously...
 FSC = Fu*king Sh*tty CigarettesThe most amazing thing in the world! You have to see it --> www.mostamazingthing.com/holycrap/huge.jpg
|
SketchyRollin564

Offline
3648 posts
1995 240sx with b16 swap and nos
Boca Raton, South Florida
3-24-2007
|
| « Re: (Dattebayo) | 8:48 PM 5/20/2008 |
|
a test light.. i could use a multimeter instead right? my dads got one i can borrow, so that should be fineand idk if its the hvac control unit, and im not gonna waste money to buy a new one for no reason maybe if i could find sombody nearby with an s14 and ask if i can plug theirs in or somthing... idk theres a dude on a local forum selling his hvac controll box for $25, if thats my last resort, but i doubt thats the problem, and im gonna have a hard time selling it if its not the problem
|
Kckouki
NICO's Resident Dumbass

Offline
7634 posts
'97 240sx
Knoxillist TN
10-7-2006
|
Bump for a homo.
|
| First < 1 2 3 4 5 6 > Last |