this is what you need to mess with its on the driver side of the box. oh and your heater core is in the back of the box FYI

let me know if you have more questions or want more pics

that pic is fcking huge, so i have no clue wtf im looking it so i resized it in MS paint and i still have no clue wtf im looking at

area doesnt look familiar at all and i dont remember seeing any of that ****... so im guessing you pulled the whole thing out of the car?

right now the battery for the only flashlight in my house is dead, and its a wierd *** battery that i dont have another of... so i cant really see back there using my phone screen... any ideas? ill do my best to find that. Its not behind the air box, its next to it, right?

also, wtf is a heater core lol

THERE ISNT ANYONE AROUND THIS GUY THAT CAN GIVE HIM A HAND? IF NOT TAKE IT TO SOMEONE. COME ONE U GOTTA KNOW WHAT A HEATER CORE IS.....?!

either way though, the problem im dealing with is only mechanics, so i should be fine without any knowledge on how the air temperatures are produced.

I just gotta find that motor he circled, test the voltage to see if its even getting any power, then if it is, open up the motor and see what i can figure out, which at that point ill probably have to ask my dad for advice

but that aside, i ended up using this bright *** small lamp thing that i plugged in to an extention cord to see, and i scan see fine (if not better) than with that flashlight, but i looked all around the left, and i cant find that motor you circled. It doesnt look like theres much on the bottom left corner of that area anyways

to anybody else reading that might be able to help, heres a smaller picture of what he circled so you have a clue wtf your looking at maybe

anybody know where the fck this thing is?

Quote, originally posted by Razi »

Dittoz, wanna smell my napkin?

350z wheels x2 sets
s14 megan header and downpipe

Quote »

this is what you need to mess with its on the driver side of the box. oh and your heater core is in the back of the box FYI

you sure? whatever ill check both.

the thing i circled earlyer (not the thing he circled, but what i circled), which he said wasnt it, was on the right side of the box.

im really lost now

brizzenden, if you know where it is, pplleeeeeeeeeassse take a picture (or take one of mine) and circle the general area where it is lol, that would be super

Brizzendan... what? lol

Shift _ Your own damn gears.

I dont wanna have to take off the dash though, cuz i dont trust myself with the airbags being there and everything, so i guess im better off paying the dealer to do this, but then i guess that means ill be paying upwards of $1,000?

this is gayyyyy

ok but seriously, ANY help greatly greatly bigly hugley a lot-ly appreciated, cuz id rather keep bumping this thread then have to pay what i would have to pay to go KA-T just to have air be able to blow in my face when the windows are up

the main question.. can i get to it without taking out the dash?

i dont know if you can access it from the in the car ill check tomorrow. for now im drunk and not going to check for you now lol. hope these pics clear things up a lil

that sucks man... lol i didnt know that stuff was still around haha jk jk

no motor swaps, modifying for you!!!

im gonna try pooping out the panel below the steering wheel and see if itl help, but you gotta remember, yours is a 13 and mine is a 14. I have airbags to worry about, you dont, plus the layout might be a little different

oh and pork chop, i dont think you got it right lol. i saw the whole assembly too, you can tell in my pictures, i just cant find the specific motor he is talking about

The whole time i was trying to find the motor you circled, i was looking through the center console area, but the pictures helped a lot to let me know where it was

for anyone who wants to help or is bored, but doesnt wanna rip apart your center console, you dont need to

just pop your head undeneath your steering column and look into that area (but shine a flashlight to that area first, from the center), and youl see it

yep, its gonna be a ***** to get to.. so i gotta find out how to get out the bottom part of that column... anybody know?

im just gonna go there and see what i can do

oh btw just pull the seat. mutch easier only takes 4 bolts.

Also for the trim under the steering column, theres the two screws closest to the pedals, i took those out.. so that side is loose, but its still on where it actually meets the steering column,

so im guessing either i have to take the bottom part OF the steering column out, or its just a pop in pop out deal? I dont wanna pull to hard if its not pop out, cause i dont wanna break anything, but i really dont wanna mess with the steering column cuz its getting really close to the air bag module thing, and since i dont really know what im doing here, i really dont want the airbag to go off in my face, or just period

so im gonna wait for sombodys advice here... anyone?

as far as seeing down there, i had to put the seat and recline it all the way back, and lay down upside down to be able to see under there... i guess itl be way eaysyer to just take off the seat...

EDIT: k nvm i got the seat out, now theres just some ****ing wire attached from the floor to my seat... im guessing its just the weight sensor for the seatbelt alert thing?

it doesnt look like it can unplug, but it wouldnt make any sense not to.. im gonna go look at it again and update this once i get the seat out and look in that area

Modified by SketchyRollin564 at 3:28 PM 5/16/2008

so i can see the area fine now, turned the car on, and brought the HVAC unit near me, and touched different buttons. When i hit the button to make it go ONLY to the face (meaning the feet air ducts would close up), air was still blowing down there, and yeah.

So i can see the motor not moving at all, however, it DOES look a little differnet then yours. somthin seems to be disconnected? im uploading pics now

heres my resized pic of motomans unit (and dude... try to resize the pics you post lol, ill do it for you)

And heres mine

notifce how the thing circled appears to be different? Either somthings not connected and part of it fell down hanging off somthing, or its supposed to be like that when the door is in the closed position... anybody got anything? lol

heres another pic if it helps

and for poops in giggles... heres my little work area

(anyone know how i can get rid of that fresh scratch i made? )

So anyone know anything or have any suggestions about that thing being disconnected or whatever? Also, yeah the motor doesnt do anything when i hit the buttons, so im guessing the motor is just dead?

Any ways i could give it a little push, or jump start it again?

Looks like im almost done (i hope) and i dont have to take out the dash or take it to a dealer!

Blend, or Mix door, which ever floats your boat. It's electric...

1992 SE Fastback Autotragic (KH3 Black), 1991 SE Fastback Hicas KA-T manual (Flat black) 1991 SE Fastback Hicas Canadian model manual (326 Super White)
"I am the Chuki crew..."

Recommended Sellers: white smoke

im pretty sure the motor is dead.. if not maybe its stuck or somthing.. so im trying to get some ideas first