Who Purchased Night Or Tophat Mounts?

[PROJECTRB240SX]

BTW CAMERON: MY PROBLEM HAS BEEN FIXED SO DON'T EVEN WORRY ABOUT IT. I'LL KEEP ALL OF YOU GUYS POSTED ON MY SITUATION AND IF ANY OF YOU GUYS HAVE QUESTIONS LET ME KNOW: [email protected]

[JonPowell]

Explain "fixed" you gotta let us know what happened after such an uproar over these mounts...

[PROJECTRB240SX]

I CONTACTED MIKE AND HE IS GOING TO TAKE CARE OF EVERYTHING.... HE APOLOGIZES FOR ANY PROBLEMS AND HOPES HE CAN PRODUCE A QUALITY PRODUCT.

IN YOUR CASE CAMERON IS SELLING THOSE MOUNTS WITHOUT AUTHORIZATION.... THE RB25 KITS AREN'T FINISHED.

[PROJECTRB240SX]

These are great mounts that were designed with a purpose. Don't go writing the mounts off, I'm just trying to clear up some misconceptions cameron is putting out there. If you guys are seriously interested in these mounts go straight to the source and contact Mike from Tophat and he can explain the ins and outs of these mounts to you throughly.

Cameron RB25 upper mounts are different and I have owned a RB25 if you want the guys number who I sold it too I can give it to you. The RB25 Recirculator valve is mounted sideways not verticle giving more clearance. You guys use the same kit because Mike designed an upper mount and a lower mount.... so I'll give you that one.

PS: THIS IS A COPY OF A POST I MADE IN THE NSR FITAMENT THREAD.

[JonPowell]

The mounts were mailed from Georgia though....I dont think Cam is in Georgia....

[PROJECTRB240SX]

CAMERON IS HERE IN AZ.... HE MUST OF HAD THE MOUNTS DROP SHIPPED FROM MIKE.

[PROJECTRB240SX]

CONTACT MIKE..... HE IS A GREAT GUY. HE'LL TRY AND GET EVERYTHING RESOLVED.

[FAST-DATSUN]

Yellow63 call me!!!!!

[Yellow4g63]

Yellow63 call me!!!!!

If I can get off work at a normal time I should beable to get home before 6 and give you a call. Funny thing was I about to call you this week too lol. ESP at work.

[AZhitman]

OK, everyone take a damn time out before I start banning people.

I'm bent that i had to read through 4 pages of petty bickering to get to this point, so I'll just say I'm far from pleased.

First of all: Calling each others' fabrication / modification skills into question is OUT. Let me make myself clear: DO NOT let it happen again. Very uncool.

Second: There is no censorship of anything here as long as it is factual and posted by an actual customer. I pay the bills here, so I reserve the right to remove anything I see fit. Believe me, NONE of our advertisers pays enough to make me disregard our community - In other words, no one is bigger than this forum we've created together.

Third: I'll expect the remainder of this discussion to be handled OFF-BOARD. If you need a drama-fest, go watch some soap operas. This is not the place for it. All parties involved (yes, ALL) need to step up, grab their sack, be MEN and resolve their issues.

Like I said, I'll expect that this is the END of the petty bickering.

You all know where to find me if you need further assistance (or wish to comment).

Much <3,

Greg