Under body plate

[94_240sx]

To bump this and see if you found out the Grade of Alum.

biggie, sorry about that. I missed it. It's 3003. I googled and found this info on different aluminum grades. Hope this helps.

http://www.aircraftspruce.com/...o.php

"3003 This is the most widely used of all aluminum alloys. It is essentially commercially pure aluminum with the addition of manganese which increases the strength some 20% over the 1100 grade. Thus, it has all the excellent characteristics of 1100 with higher strength. It has excellent corrosion resistance. It has excellent workability and it may be deep drawn or spun, welded or brazed. It is non heat treatable. Applications: cooking utensils, decorative trim, awnings, siding, storage tanks, chemical equipment."

[94_240sx]

thanks for the hardware dimensions, payment sent.

Yours is going out in 10 min.

[biggie]

biggie, sorry about that. I missed it. It's 3003. I googled and found this info on different aluminum grades. Hope this helps.

http://www.aircraftspruce.com/...o.php

"3003 This is the most widely used of all aluminum alloys. It is essentially commercially pure aluminum with the addition of manganese which increases the strength some 20% over the 1100 grade. Thus, it has all the excellent characteristics of 1100 with higher strength. It has excellent corrosion resistance. It has excellent workability and it may be deep drawn or spun, welded or brazed. It is non heat treatable. Applications: cooking utensils, decorative trim, awnings, siding, storage tanks, chemical equipment."

Excellent. Any update on the Greddy ones?

[94_240sx]

Excellent. Any update on the Greddy ones?

Email sent!

[wmdavis007]

I got to the shop last night and installed my under body skid plate. Very easy install...took me longer to try and jack my low *** car up then to install the plate. It was easier for me to roll under the car with the plate on my belly. Then I just held the plate up and started the front bolt first...cause I thought it would be hard to get that spacer in there if I did the middle bolts first. Then I moved to the middle and then the back bolts and nuts. Very easy and very nicely designed under plate. Way to go Sukhee!!! Please thank your friend as well for me. Here is the plate installed:

[Kalypso]

I GOT MINE IN 2 DAYS!

blazing fast, not ready to install it yet,and I've got to go to home depot and get the hardware

but, all is well.

[bloodsport]

i had a factory one but i was a dume 16 year old

[94_240sx]

i had a factory one but i was a dume 16 year old

Factory cover soaks up oil like crazy, so if you have main crank seal or power steering leak, it's trashed. I've gone through a couple of brand new OEM covers myself.

[sultan]

i took the coilovers off my coupe and put them on the hatch, then i took the wrong angle coming out of the driveway and christened your plate on the sidewalk. hahahhaa

[biggie]

Bump this as I just order mine (and one for a friend).

[DeXteR]

So who's selling theirs on ebay all ready?!

http://cgi.ebay.com/ebaymotors...76531

[94_240sx]

So who's selling theirs on ebay all ready?!

http://cgi.ebay.com/ebaymotors...76531

Oh! That's me. I also posted in fabricator's market too since Greg approved it.

[DeXteR]

would you prefer we "bid" on them to boost your feedback or just buy them here? I'm probably going to be ready to purchase tomorrow.

[94_240sx]

would you prefer we "bid" on them to boost your feedback or just buy them here? I'm probably going to be ready to purchase tomorrow.

Just buy it here. Thanks for asking though. I'll pack one up tonight then.

BTW, just emailed tracking # to biggie.

[DeXteR]

Ok, one more question: Would you prefer paypal and have $2.70 cut from what you receive or would you like me to send you a check and have me spend an extra $0.41 to send it to you? I'm fine with either way. Let me know and payment will be on its way!

[94_240sx]

Dexter,It's not a big deal, so you can just just Paypal it.

[DeXteR]

payment sent

[bakgwailo]

Hey, still interested in getting mine ! I can get one right now (need it badly, road salts and what not keep kicking up in the engine bay on my vert), and I will probably order the other 2 next week when I get my paycheck. I will pay pal you right now w/ my info. THanks!

[94_240sx]

Bakgwailo,Got it. Yours will go out on Monday morning.

Dexter,Just emailed you the tracking #.

[Nunook]

Are you still selling these??? How much for one? I should be able to get the bolts myself.

I just recieved one i ordered online, but its not as long and doesn't have the bend in the front that urs does. I really want that bend in the front, cause i want the air to go under it, not over.

P.S. Bump...

[94_240sx]

Quote »Are you still selling these??? How much for one? I should be able to get the bolts myself.I just recieved one i ordered online, but its not as long and doesn't have the bend in the front that urs does. I really want that bend in the front, cause i want the air to go under it, not over.

P.S. Bump...[/quote]Check your email...

[New2SR20]

damn i forgot all about this..i need one..how much are they again?? let me know if i can still get my hands on one..

[DeXteR]

I took mine out of the box once...



It's a great piece. I just don't want to put it in until I get all my oil leaks tracked down and repaired. That means it might not be until I go KA-T.

[biggie]

I took mine out of the box once...



It's a great piece. I just don't want to put it in until I get all my oil leaks tracked down and repaired. That means it might not be until I go KA-T.

Yeah, my 2 are sitting in the garage. As soon as I get a free weekend I may put the Vert one on (need to paint first) or I may wait until after 5spd swap, the coupe one is waiting on work (ka-t, etc).

[KLYPH]

Im a little interested but doesnt that completely block the power steering cooler?

[biggie]

Im a little interested but doesnt that completely block the power steering cooler?

Uhm, where is this PS cooler you speak of? It doesn't block anything that the OEM bottom cover doesn't block.

[KLYPH]

I didnt even know 240s came with a bottom cover? lol. The power steering cooling line is in front of the crossmember. Its just a long power steering line that goes from the driver side to the passenger side then loops back to the drivers side. Its not much but a cheap little thing but it has a purpose.

[biggie]

I didnt even know 240s came with a bottom cover? lol. The power steering cooling line is in front of the crossmember. Its just a long power steering line that goes from the driver side to the passenger side then loops back to the drivers side. Its not much but a cheap little thing but it has a purpose.

Never knew that was considered a cooling line. But yeah from the factory is covered by the OEM bottom cover.

Don't know why I can't find a pic of the OEM one. Just threw mine away the other day when moving.