RB Classifieds - RB engine Parts Only

Discuss the RB20, RB25 and RB26 series engines.
X-TuN
Posts: 41
Joined: Thu Dec 18, 2008 4:20 am

Re: RB Classifieds - RB engine Parts Only ------ Sold

Postby X-TuN » Mon Jan 14, 2013 9:31 am

Sold
Last edited by X-TuN on Sun Feb 17, 2013 6:30 pm, edited 1 time in total.


Rbee25
Posts: 33
Joined: Wed Nov 14, 2012 7:25 pm
Car: 1995 240sx se

Re: RB Classifieds - RB engine Parts Only

Postby Rbee25 » Mon Jan 14, 2013 8:29 pm

chad b. wrote:Stock RB25DET ECU $150 shipped in the USA
Q45 throttle body with brand new TPS $125 shipped USA
Bullseye Power S366 T3 .85 a/r $600 shipped USA

PM me if interested

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Still have the ecu? Is it s1 or s2?

IronMonkey
Posts: 336
Joined: Sun Jul 30, 2006 9:34 pm

Re: RB Classifieds - RB engine Parts Only

Postby IronMonkey » Wed Jan 16, 2013 10:05 pm

Hey guys, Im changing up my car for 2013 and have a few parts that I dont need. I have tracked with this setup numerous times without any problems and was tuned at 18psi pushing 460hp, that was on stock motor. Shipping is not included or pick up for free in Columbus Ga area. You can reach me at 706-442-2003.

*Apexi Power FC PFC with datalogit. Works great. Comes with cable to connect to your laptop and Z32 maf/plug $950 (keeping datalogit with PFC)

*HKS cast bottom mount manifold with Precision GT35R, 3" downpipe, Tial 44mm vband wastegate with dumptube. Oil lines, coolant. $1500 for everything.

*Sard 550cc side feed injectors in factory rail with Nismo FPR. $600

*Tial Q Bov (Blue) $170

Or 2.8k for everything!

*Rb25 Starter. Works This was my spare :) $95

*2007 Wrx STI rear calipers in gold. Direct bolt on for any S13/s14 Z32/33 G35! No bracket needed $350


old dyno graph with less boost
Image

proven to work at the track
Image


Image

Image

Image

Image

and the beast itself
Image

X-TuN
Posts: 41
Joined: Thu Dec 18, 2008 4:20 am

Re: SOLD

Postby X-TuN » Fri Jan 25, 2013 12:42 pm

SOLD
Last edited by X-TuN on Sun Mar 10, 2013 3:14 am, edited 1 time in total.

reuhzaki
Posts: 103
Joined: Sat Mar 03, 2012 8:14 am
Car: 1991 240sx s13

Re: RB Classifieds - RB engine Parts Only

Postby reuhzaki » Sun Jan 27, 2013 9:21 am

Wtb a water pump for rb20 4056136824

Beat92240
Posts: 212
Joined: Sat Aug 14, 2010 5:36 pm
Car: R33 RB26 S13 Coupe

Re: RB Classifieds - RB engine Parts Only

Postby Beat92240 » Sat Feb 02, 2013 8:11 am

Kiley
Contact: 412.370.3094
location: Butler, PA (Just north of Pittsburgh)
item: Tial Q BOV
ship: yes at buyers expense
PRICE: $200 (sale pending)
2 hours dyno time and less than 10 miles. Going EFR with built in BOV so no longer needed.
Image
Image

item: Mckinney RB26 Swap Downpipe from S13
ship: yes at buyers expense
PRICE: $350
Heat wrapped in Tomei heat wrap. Used for about 2 hours on a dyno and less than 10 miles. Burnt Power Steering Fluid included at no additional charge. Just selling my twin setup to go single.
Image
Image

item: RB26 HKS SPL Intake Kit modified to MAP but can be returned to MAF
ship: yes at buyers expense
PRICE: SOLD!!!
Going single so selling my twin setup.
Image
Image
Image
Image
Image

item: Garrett "Grup-N" GT2860R Turbos
ship: yes at buyers expense
PRICE: $1,750
Again, about 2 hours dyno time and less than 10 miles. Look at how clean those exhaust housings/wastegates are! Again just selling because I'm going single big.
Image
Image
Image
Last edited by Beat92240 on Sat Feb 02, 2013 10:48 pm, edited 1 time in total.

twinspoool
Posts: 108
Joined: Sat May 05, 2007 7:09 am
Car: S14 zenki

Re: RB Classifieds - RB engine Parts Only

Postby twinspoool » Sat Feb 02, 2013 9:08 am

Contact : [email protected]
Location : Ocean Springs, MS
Item: Brand new ISIS rb25 intake manifold
Ship: Yes
Price : $380 shipped

Image
Image
Image

User avatar
Tenchuu
Posts: 96
Joined: Sat Dec 18, 2004 5:39 am
Car: 97 240

Re: RB Classifieds - RB engine Parts Only

Postby Tenchuu » Sun Feb 03, 2013 10:22 pm

I am looking to clean out my garage of things i no longer need/ am not going to get around to.

First up I have a Holset setup for a RB20/25 i bought on here.
$650+ shipping

Holset hy35w turbo bought with 0 miles on a fresh rebuild/re balance and a brand new actuator, set of (6x) 550cc DSR low imp top feed injectors RB25DET manifold injector clips and a new 4'' SS v-band clamp for turbo - exhaust connection
Original post:

[QUOTE=Romeo_rus;4502331]Up for sale my rb setup, I'm going for bigger pawa!! LOL
so for sale ebay manifold, customized to clear valve covers (who doest know these manifolds have 1 small problem, the t3 flange is angled that way so big ex. housing turbos hit valve cover) so the flange was cut and rewelded with different angle. A little bit dirty welds, but it will stay there forever the price of the new mani was $175
+ Holset hy35w turbo was purchased for $250+ $450 rebuild&balancing + brand new actuator.

+ I have a set of 550cc DSR low imp top feed injectors

ASKING PRICE EVERYTHING $700+SHIPPING
OR INJECTORS $160 SHIPPED
MANIFOLD $170 SHIPPED
TURBO $450+SHIPPING
Image
Image[/QUOTE]
I never did anything with it, has sat in a box on the shelf at my house, don't want to look at them anymore.





Moving on to a stock RB25DET S1 M/T ECU $100 OBO shipped
No issues with it, i upgraded to a nistune, and this was a backup that i don't need anymore.



Stock RB25DET throttle body **without TPS** $15 obo
Image



RB25DET complete clutch fan $70 shipped:
looks like a stock clutch fan, but i can get pics.
Once again my backup parts, don't need it so help yourself!




Dual stage turbo XS Dual stage manual boost controller $55 (currently sell for $249 new)
as seen here:http://turboxs.com/shop/boost-controlle ... oller.html but anodized blue cylinders. Also tested and works great.
Image



Shoot me a message if you are interested in any of this, I am sick of moving it around and not using this stuff.
Last edited by Tenchuu on Mon Feb 11, 2013 6:43 pm, edited 1 time in total.

User avatar
chad b.
Posts: 311
Joined: Fri Nov 21, 2008 12:17 am
Car: chocolate chip kouki
Location: Mobile, AL

Re: RB Classifieds - RB engine Parts Only

Postby chad b. » Tue Feb 05, 2013 7:21 pm

sold
Last edited by chad b. on Tue Mar 05, 2013 2:36 am, edited 1 time in total.

User avatar
chad b.
Posts: 311
Joined: Fri Nov 21, 2008 12:17 am
Car: chocolate chip kouki
Location: Mobile, AL

Re: RB Classifieds - RB engine Parts Only

Postby chad b. » Tue Feb 05, 2013 10:40 pm

sold
Last edited by chad b. on Tue Mar 05, 2013 2:36 am, edited 1 time in total.

redrbz
Posts: 28
Joined: Thu Aug 23, 2012 9:26 pm
Car: 260z rb25

Re: RB Classifieds - RB engine Parts Only

Postby redrbz » Thu Feb 07, 2013 11:28 am

chad b. wrote:I have an RB25DET block and cylinder head for sale. The cylinder head is virgin, meaning it has never been cut or rebuilt. It is complete minus the cam gears.
$325 + shipping.

I also have an RB25DET short block for sale. Cylinder #4 blew out the piston ring lands, so it needs to be rebuilt. This would be perfect for anyone looking for a spare block to build on the side. *Comes with oil pan and pickup
$150 +shipping

RB25DET power steering pump
$100 + shipping

PM me if interested. I will try to remember to check my PM's at least every other day.
Will you sell me the exhaust camshaft from your rb25 head? Text me if yes. 9166065125. Thanks

User avatar
240z4u
Posts: 2071
Joined: Mon Feb 21, 2005 4:47 am
Car: 95' 240sx
Contact:

Re: RB Classifieds - RB engine Parts Only

Postby 240z4u » Thu Feb 07, 2013 12:33 pm

S2 RB25DET ECU - 100 shipped in the conus
S2 RB25DET coils and coil harness - 100 shipped
RB25DET crank pulley with minimal chipping - 40 + ship


All prices are OBO.

Edited to update sold stuff.
Last edited by 240z4u on Wed Feb 27, 2013 1:23 pm, edited 2 times in total.

User avatar
Carl H
Posts: 6018
Joined: Mon Aug 04, 2003 4:09 am
Car: 1995 240SX SE RB30DET
Contact:

Re: RB Classifieds - RB engine Parts Only

Postby Carl H » Sat Feb 09, 2013 6:53 pm

sold!
Last edited by Carl H on Wed Feb 20, 2013 6:15 am, edited 1 time in total.

2jz260z
Posts: 7
Joined: Sat Feb 09, 2013 3:26 pm
Car: 260z

Re: RB Classifieds - RB engine Parts Only

Postby 2jz260z » Sun Feb 10, 2013 2:39 am

240z4u wrote:S2 RB25DET ECU - 100 shipped in the conus
S2 RB25DET coils and harness - 100 shipped
RB25DET crank pulley with minimal chipping - 40 + ship

All prices are OBO.
Hey 240z4u, is that Harness complete? If it'll work on an RB20, consider it sold!

styc
Posts: 55
Joined: Thu Jul 05, 2007 11:17 am

Re: RB Classifieds - RB engine Parts Only

Postby styc » Tue Feb 12, 2013 5:30 pm

Ryan C.
willing to ship

RB20 complete head (no valve covers) -$100
RB20 transmission -$100
RB20 AC compressor and bracket -$50
Rb20 power steering pump -$50

everything is OBO

pm if interested

User avatar
240z4u
Posts: 2071
Joined: Mon Feb 21, 2005 4:47 am
Car: 95' 240sx
Contact:

Re: RB Classifieds - RB engine Parts Only

Postby 240z4u » Fri Feb 15, 2013 8:22 am

2jz260z wrote:
240z4u wrote:S2 RB25DET ECU - 100 shipped in the conus
S2 RB25DET coils and harness - 100 shipped
RB25DET crank pulley with minimal chipping - 40 + ship

All prices are OBO.
Hey 240z4u, is that Harness complete? If it'll work on an RB20, consider it sold!
Sorry I wasn't more clear. It's a coil harness and coils!

User avatar
chad b.
Posts: 311
Joined: Fri Nov 21, 2008 12:17 am
Car: chocolate chip kouki
Location: Mobile, AL

Re: RB Classifieds - RB engine Parts Only

Postby chad b. » Fri Feb 15, 2013 8:09 pm

sold
Last edited by chad b. on Tue Mar 05, 2013 2:37 am, edited 1 time in total.

Jonhyboy
Posts: 7
Joined: Fri Sep 21, 2012 10:17 pm
Car: 240sx

Re: RB Classifieds - RB engine Parts Only

Postby Jonhyboy » Mon Feb 18, 2013 9:38 am

Carl H wrote:r33 gtr ecu - 50$ shipped...pm or email me.
Image
I want that ECU!

Joker85
Posts: 3
Joined: Thu Feb 21, 2013 2:59 pm
Car: 91 @ 95 240sx
Location: Marrero louisiana
Contact:

Re: RB Classifieds - RB engine Parts Only

Postby Joker85 » Thu Feb 21, 2013 3:40 pm

sold
Last edited by Joker85 on Thu Mar 21, 2013 11:58 am, edited 4 times in total.

DRFTcrazy
Posts: 49
Joined: Wed Mar 16, 2005 6:47 pm
Car: 2402sx

Re: RB Classifieds - RB engine Parts Only

Postby DRFTcrazy » Wed Feb 27, 2013 6:22 pm

Want to buy-
RB25 power steering pump bracket
PM me or email [email protected]

X-TuN
Posts: 41
Joined: Thu Dec 18, 2008 4:20 am

got one

Postby X-TuN » Sun Mar 10, 2013 3:17 am

found one! please remove...
Last edited by X-TuN on Sun Apr 14, 2013 4:37 pm, edited 1 time in total.

Race_Breed2.0
Posts: 2
Joined: Tue Mar 05, 2013 5:02 pm
Car: 89 Rb20det S13 Coupe
Location: Tennessee

Re: RB Classifieds - RB engine Parts Only

Postby Race_Breed2.0 » Sun Mar 17, 2013 3:06 pm

Name- Chris
Location-Nashville TN
Contact via Pm OR EMAIL [email protected]

I am parting out my rb20det, it has low compression, and i am replacing it with an Rb20 i have been rebuilding over the last year. All parts are in great shape. Some parts are pretty new. This motor has been in my daily for about 3 years and never had any real issue till now. I was tedious on the maintenance. I will get some pics up tomorrow, most parts are still on the engine but will try to pull them as interest is peaked.

Rb20 head-SOLD
Rb20 MAFS, previous owner broke the bolt holes off instead of buying a filter adapter, works fine-$80 shipped
Rb20 throttle position sensor-$45 shipped
Rb20/25/26 Cam angle sensor, half moon key was broken off befor i got it, marked it so i can line it up, and worked fine-$55 shipped
Rb20/25/26 Cam angle sensor bracket with bolts-$25 shipped
Rb20/25/26 water pump (1500miles)-$45 shipped
Rb20 timing belt tensioners-$25 shipped
Rb20/25 oem turbo manifold-$50+shipping
Rb20 Oem upper intake with throttle body and IACV-$50+shipping
Rb20 Oem Cams with gears-$50+shipping
Rb20 Ignitor chip-$45 shipped
Rb20/25 alternator fresh rebuild with bracket and hardware-$160 shipped
Rb20/25 starter rebuilt in september-$120 shipped
Rb20 transmission dust shield-$35 shipped
RB20 Crank-$150+shipping
Rb20 Rods-$75+shipping
Rb20 Fuel rail with oem 270cc injectors and oem fpr-$50
Rb20/25/26 coil packs with harness and brackets=$155 Shipped
Rb20/25 Same side fmic, some bent fins but no leaks-$100+shipping
RB20 Oil tree-$30 shipped
RB20 thermostat housing-$25 shipped

if you need anything not listed i probably have it. Just ask. NOT FOR SALE ARE.... Trans, harness, ecu, clutch, flywheel, timing covers, turbo, turbo lines, coilpack cover, valve covers, oil pan, mounts, ac parts,and powersteering.

I am interested in trades, mainly looking for a wideband, Catch can, good steering rack with lines

User avatar
ST240
Posts: 575
Joined: Sun Aug 04, 2002 11:45 am
Car: RB30DET s13
01' Pathy
Location: Edmonton, Canada

Re: RB Classifieds - RB engine Parts Only

Postby ST240 » Sat Apr 06, 2013 5:07 pm

I know this is a long shot, but i need some RB (any series will do) cam caps and bolts. PM if you have any spares.

redrbz
Posts: 28
Joined: Thu Aug 23, 2012 9:26 pm
Car: 260z rb25

Re: RB Classifieds - RB engine Parts Only

Postby redrbz » Mon Apr 15, 2013 10:05 am

These came off of my rb25 long block that I just purchase. No longer need this stuff because I already upgraded. Everything is in good working condition. These are all from a series 1

-injectors with fuel rail and regulator complete $120.00
-complete coil-pack with harness plug$120.00
-power steering pump$100.00
-brand new exedy clutch$80.00
-complete head no problem, guarantee still good $400.00
-valve cover $60.00 pair
-maf sensor $60.00
-igniter $50.00
-rb25 s1 ecu $140.00

Call or text me at 9166065125.

RRRRB
Posts: 758
Joined: Wed Jun 01, 2011 9:31 am
Car: 98 RB powered S14
Location: WA

Re: RB Classifieds - RB engine Parts Only

Postby RRRRB » Sun May 05, 2013 6:16 pm

Rb25 OEM Stock pisons and rods, i took these out of my own rb25 motor right when i got it from Japan, Skirts Domes etc are in fabulous shape, no scuffing etc.. rods still have factory bearings in them which are also in great shape.. just need to be cleaned and put back to work.

Email - [email protected]

150 OBO

Image

Brad0105
Posts: 18
Joined: Fri Apr 05, 2013 7:41 pm
Car: 1989 S13 RB25 Neo

Re: RB Classifieds - RB engine Parts Only

Postby Brad0105 » Thu May 09, 2013 6:55 pm

WTB RB25 engine mounting brackets! I need them ASAP please!

User avatar
chad b.
Posts: 311
Joined: Fri Nov 21, 2008 12:17 am
Car: chocolate chip kouki
Location: Mobile, AL

Re: RB Classifieds - RB engine Parts Only

Postby chad b. » Thu May 09, 2013 10:21 pm

need an rb25det idle air control valve

User avatar
240z4u
Posts: 2071
Joined: Mon Feb 21, 2005 4:47 am
Car: 95' 240sx
Contact:

Re: RB Classifieds - RB engine Parts Only

Postby 240z4u » Fri May 10, 2013 11:39 am

Wanted RB25DET idle air control hoses. I cut mine up years ago and need them again of course.

Paradox
Posts: 102
Joined: Thu Nov 07, 2002 12:41 pm
Car: Cars, computers...
Contact:

Re: RB Classifieds - RB engine Parts Only

Postby Paradox » Mon May 13, 2013 10:29 am

I just texted about Tial BOV and Power FC, they are sold according to seller.

IronMonkey wrote:Hey guys, Im changing up my car for 2013 and have a few parts that I dont need. I have tracked with this setup numerous times without any problems and was tuned at 18psi pushing 460hp, that was on stock motor. Shipping is not included or pick up for free in Columbus Ga area. You can reach me at 706-442-2003.

*Apexi Power FC PFC with datalogit. Works great. Comes with cable to connect to your laptop and Z32 maf/plug $950 (keeping datalogit with PFC)

*HKS cast bottom mount manifold with Precision GT35R, 3" downpipe, Tial 44mm vband wastegate with dumptube. Oil lines, coolant. $1500 for everything.

*Sard 550cc side feed injectors in factory rail with Nismo FPR. $600

*Tial Q Bov (Blue) $170

Or 2.8k for everything!

*Rb25 Starter. Works This was my spare :) $95

*2007 Wrx STI rear calipers in gold. Direct bolt on for any S13/s14 Z32/33 G35! No bracket needed $350


old dyno graph with less boost
Image

proven to work at the track
Image


Image

Image

Image

Image

and the beast itself
Image

Paradox
Posts: 102
Joined: Thu Nov 07, 2002 12:41 pm
Car: Cars, computers...
Contact:

Re: RB Classifieds - RB engine Parts Only

Postby Paradox » Mon May 13, 2013 2:36 pm

WTB Nistune ECU or JWT ECU or Apexi Power FC for RB20. I have gone with bigger turbo/injectors, etc and need a way to tune it.


Return to “RB20DET / RB25DET / RB26DETT Forum”