LoveFab equal length RB25 manifold

Post by **skribblah** » Tue Apr 03, 2007 5:47 pm

hurry up and make one so i can buy it and take it to taipei and start making some real money!!

Post by **DETurbine** » Wed Apr 04, 2007 3:32 am

Nice to be back on the board and see everyone. I should hopefully have some pictures in about a month of the engine bay. Ran into a few problems, but finally got everything figured out.

What is the new release date on this manifold now?

Post by **sxracerb25** » Sun May 06, 2007 9:10 pm

DETurbine wrote:Nice to be back on the board and see everyone. I should hopefully have some pictures in about a month of the engine bay. Ran into a few problems, but finally got everything figured out.

What is the new release date on this manifold now?

Any updates?

Post by **R33GTS-T** » Mon May 07, 2007 5:25 am

sorry guys, i haven't heard anything from them in a while. i left a few messages but never received any reply back. i guess they just got busy and decided to put this on the back burner for now....you could try emailing them and see what's going on

- Daniel

Post by **blurrbosi** » Mon May 07, 2007 2:57 pm

how much is this thing supposed to cost.?

Post by **Chaos the Xile** » Tue May 08, 2007 7:21 am

Its still a PROTOTYPE so the final cost is not yet set in stone. I have contacted LoveFab on numerous occasions just to check the status of the manifold. Guy told me late summer it should be done :/

Post by **blurrbosi** » Tue May 08, 2007 10:51 am

Chaos the Xile wrote:Its still a PROTOTYPE so the final cost is not yet set in stone. I have contacted LoveFab on numerous occasions just to check the status of the manifold. Guy told me late summer it should be done :/

Perfect for a florida heat test!

Post by **Chaos the Xile** » Tue May 08, 2007 7:02 pm

Yeah but they test the heck out of there stuff like run it on a dyno for hours and hours at different boost setting just a overall stress test to ensure the durability

Post by **Kansei240sx** » Tue May 08, 2007 7:22 pm

Those are some badass manifolds, i was considering moving my turbo much further foward later on down the road.

Something along the lines of this...

This a guy from our local boards and somewhat of a KA-T legend.

Badass front fender exhaust exits!
Modified by Kansei240sx at 11:25 PM 5/8/2007

Post by **Chaos the Xile** » Wed May 09, 2007 5:23 am

NOTE: That Fender exhaust is sooooooo loud! I know of a few DSM's in my area running like that. Sounds like a freaking top fuel dragster!

I may be getting a manifold made soon like that one for my RB25, there is a guy locally that is gonna be looking at my car and seeing what he thinks he can do!

Post by **coreansurfer** » Wed May 09, 2007 11:45 pm

i know that the test car for this is an rb25 s13 but will the manifold fit the s14?

Post by **Chaos the Xile** » Thu May 10, 2007 6:39 am

you might wanna email love fab on that one!!

Post by **SStrunks** » Mon May 21, 2007 10:48 pm

geez ive been looking into turbo manifolds all night as research and only came across a few that will work for our swaps. Not so many choices out there for us is there? I'm probably gonna wait to see LoveFab manifold before i make any decisions, full race is just too damn expensive to just buy without a 2nd thought. Im really excited about this one though, too bad its delayed a bit.

Post by **slavetothemuzic** » Fri Sep 28, 2007 7:34 am

Any updates on this?

We're well past March now.

Post by **Sky80** » Mon Oct 01, 2007 11:03 pm

+1 whats the hold up on this? I would love to see this product... but how i see it right now, unless you have a honda lovefab doesnt seem to care?!?!

Post by **Darius** » Tue Oct 02, 2007 8:33 am

I e-mailed them yesterday with regard to putting out this illusive RB25DET manifold, but haven't heard any response yet. We'll see. If LoveFab isn't going to release theirs this winter, I'm going to have to decide between the peak performance and full-race. I know I know...apples to oranges.

Post by **Abdo** » Tue Oct 02, 2007 9:43 am

Well badass!Better than paying $2,300 for a Full Race manifold I suppose.

Post by **Sky80** » Tue Oct 02, 2007 10:03 pm

^^HA, yeah if they ever produce it!

Post by **themadscientist** » Tue Oct 02, 2007 11:22 pm

The setup in my sig is available right now

Post by **Abdo** » Wed Oct 03, 2007 1:58 am

Sky80 wrote:^^HA, yeah if they ever produce it!

Full-Race does produce them.

RB25/26-S13http://www.full-race.com/catal...a6fd4

RB25/26-S14http://www.full-race.com/catal...a6fd4

Post by **l0nestar** » Wed Oct 03, 2007 2:02 am

themadscientist wrote:The setup in my sig is available right now

But Why TMS?

Darius is not running a CA-18, nor is he thinking of Twins?!?!?!

Oh, your RB2x mani -- my bad

Post by **Darius** » Wed Oct 03, 2007 2:56 am

Abdo wrote:
Full-Race does produce them.

RB25/26-S13http://www.full-race.com/catal...a6fd4

RB25/26-S14http://www.full-race.com/catal...a6fd4

Thanks captain obvious! LOL jk man. I think we're all well aware of the full-race manifolds and moreso the price. He was referring to LoveFab and if they'd ever produce an RB25 manifold to compete with full-race.

Post by **Abdo** » Wed Oct 03, 2007 3:06 am

Post by **cdorhout** » Wed Oct 03, 2007 7:47 am

This is the email I got back from Lovefab when I asked them when we can expect a manifold:

Chad,

Once we pickup our gineau pig a manifold should be ready within the month. I'm projecting a pickup date of around two weeks from now.

The car is an S14 so that's all I'll guarantee fitment on.

Cody Loveland

Post by **Darius** » Wed Oct 03, 2007 8:03 am

When did you get that e-mail from them?

Post by **Abdo** » Wed Oct 03, 2007 8:35 am

cdorhout wrote:The car is an S14 so that's all I'll guarantee fitment on.

well **** me.

Post by **SStrunks** » Wed Oct 03, 2007 9:14 am

finally somewhat of an update from them...thanks for emailing them.

Post by **cdorhout** » Wed Oct 03, 2007 9:30 am

Darius wrote:When did you get that e-mail from them?

Emailed them two days ago. Got the reply today (10/03/07)

Post by **Darius** » Wed Oct 03, 2007 9:49 am

WTF? I never got a response and I e-mailed them the same day. Sorry LoveFab, you just lost a customer! hahahaha jk, but maybe not.

Post by **cdorhout** » Wed Oct 03, 2007 9:53 am

If they only want 1,200 - 1,300 for that manifold, I bet they didn't lose a customer.

LoveFab equal length RB25 manifold

Re: (R33GTS-T)

Re: (DETurbine)

Re: (blurrbosi)

Re: (Chaos the Xile)

Re: (blurrbosi)

Re: (Chaos the Xile)

Re: (Kansei240sx)

Re: (Chaos the Xile)

Re: (coreansurfer)

Re: LoveFab equal length RB25 manifold (R33GTS-T)

Re: (Sky80)

Re: LoveFab equal length RB25 manifold (R33GTS-T)

Re: (Sky80)

Re: (Sky80)

Re: (themadscientist)

Re: (Abdo)

Re: (Darius)

Re: (Abdo)

Re: (cdorhout)

Re: (cdorhout)

Re: (Darius)

Re: (cdorhout)

Re: (Darius)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums