Idaho Tuner's 240/|SR Build thread

[idahotuner]

well i got some good news guys. phase2 will have the wheels instock next week hopefully. and i am getting the rest of the tool i need to set timing and shim my head tomorrow. so i got alot i will be ding to my car.

oh and i want to sell my tripple projectors to get bricks so i am making a forsale add for that.

[Slideways^Jordan]

Sounds good cant wait fo your update ben how much do you want for your triples i would like a set of both bricks and triples but im gonna just use my bricks for now.

[idahotuner]

yeah i posted the link in your build thread. all i wantto do is get my car on the road. now. i have been so anxious to drive it.

[Slideways^Jordan]

yeah i posted the link in your build thread. all i wantto do is get my car on the road. now. i have been so anxious to drive it.

Lol Me too man that what im working on right now is im waiting on my z32 ebrake cables and then put my braklines on.

Heres a thread i just made for some of my sr parts.

zer...d=227

[idahotuner]

well i gota paypal refund for my injectors cores. makes me wish i had used the way duffman suggested for me to take them how, cause i was pretty rough on them. so i only got 50 dollars instead of 100, but hey 50 is better then non.

[idahotuner]

ok guys i am trying to raise some more money for my build here. so hit up my forsale threadi havea ton of parts on it. zerothread?id=325548

[idahotuner]

i am freaking stoked right now. i cant wait tell monday so i get paid and buy my wheels

[pflicht]

Ha nice. I get paid Thursday and will pay the last months rent. Then the following paycheck, idk... either springs/shocks or I'll save and get coils. IDK. I got to thinking about it and it seems like a better route to do coils. All I want is a big drop though... Hmm /threadjack

[Kalypso]

I think I saw an exterior pic of your Car on car domain, but i wasnt sure, the engine bay looked like yours,

can you post a pic of the exterior one more gain!?

[idahotuner]

I think I saw an exterior pic of your Car on car domain, but i wasnt sure, the engine bay looked like yours,

can you post a pic of the exterior one more gain!?

yeah i have a cardomain

here are the ones i have posted on there. and if you go to my nico profile i actually have a link

[pflicht]

yummy!

[idahotuner]

well after getting my finances in order.depending on if i sell my springs. then this is the plan.April-marches payElite WheelsQ45 brakes May - using aprils payApexi AVC-RS15 HLSD

[idahotuner]

OK GUYS> i think i am in need of a new rear knuckle for the drivers side. can some one hook me up?

[Asmar]

Lookin' better and better. When do you expect to finish this?

[idahotuner]

Lookin' better and better. When do you expect to finish this?

it will be on the road the end of april painted or not.

[idahotuner]

well a quick update. pulled m y head back apart to to my shims tomorrow. the guides were all exactly 3mm but the shims all varied by about .02mms

tomorrow i will hopefully have the tool to put it all togethr right. so i wil ltakea ton of pics then. plus i will set the spark timing.

so wish me luck.

[Slideways^Jordan]

wish u luck buddy!!

[idahotuner]

ok. dokie i got all the parts to put together my valve shim tool. i will take pics of that when i do it. and i ordered my elite wheels today should get shipped out tomorrow. so that means next Wednesday they should be here. so i ma excited for that too. oh and i havea timing gun. i just go to fiena spark plug wire to use to set my timing. now. hope my dad didnt throw his away from changing them on the MR2.

pics coming later tonight internet permitting

[vic2186]

are the bc 272 cams lopey at all?like hks cams?

[wackawacka]

How old is your sister?

[codyace]

are the bc 272 cams lopey at all?like hks cams?

Unless you've got a 35r and some SLA's, there is no reason for 272 duration cams...

[CRyan]

Idaho - you have a reply on your f/s ad!

Looks like the project is turning out well - good to see!

[idahotuner]

How old is your sister?

2 are married and the other is to young!

to night started out super smooth but did it finish smooth f*** no.

we built the tool for shimming my head which i would have pic up loaded of but i am forced to use dial up because Hughes net is down.

so shimming my head when super smoothi found where all the shims went. bled the lifters fine. got the cams installed correctly. and was torquing down the cam bolts the very last one torqued and broke off in the head. with that pop i was like f*** THIS!

my dad and i tired to EZ it out but the bolt is hardened steel and the head is aluminum so it kept wanting to jump off int othe head.

so tomorrow we will see if we can get it out withs osme how. might have to possible redrill the hole and tap it. then use a thing you bolt inside.

and to top it off i am using dial up to tell you all.

great day went bad fast.

inother news my wheels will be here monday doent mean i will be driving my car. then. probably wont be tell the middle of april. i

have decided to slow down.on the build. i have been pushing it too hard to get her done.although shimming the head was the last thing i had to do to the motor.

then that was going be done. well what ever Sh*t Happens!

[idahotuner]

so we got the broken bolt out. and i have a new one on the way.and i dropped a washer down the front of the engine so i had to pull the oil pan.but that wasa good thing there was so much nasty crap i nthe oil pan from the motor flooding and having the gasoiline eat away at the gasket. so we cleaned all of that out and got al lthe crap out.got the washer out too.i will up load pics here in a little bit.sold some more car parts today. so i will be able to afford my Q45 brakes pretty sooni hope PBM gets there sh*t in stock soon, so i can get my suspension shipped to me.

thursday that new bolt will be here so that is when i will put the cams back in and stuff and close the valve cover forever lol.

thinking about doing the whole car in winter camo for a while. then when my dad has time we will paint it black. but just an idea.

karmakazis kouki was sweet with the winter camo. but we will see.lol

[idahotuner]

so check out my 15 dollar valve shim tool.so here is almost al lthe parts i used.and here it is togetherbought this to measure the shimsand everything laid out and measuredeverything laid put in order fro mmy head.measuring the valvesshims and guides inbleeding the liftersall the shims and guides in.and rocker arms installed and the lifters installed made sure they were slid in the right way

i am waiting to put the cams in until i get that new bolt for the cam cap.

wheels will be the next pics!!!!

[pflicht]

Wow that head is so shiny! Sucks that you had to pull the oil pan, but at least you were able to get all the crap out! Catch you later

[addisonblck]

ooooo.....ahhhh.... lol good job...sux about the broken bolt though..... never a good thing.

[vic2186]

hey i see you got the bc 272 how are they running are the lopey at all?any tunning issues??let me know plz

[idahotuner]

hey i see you got the bc 272 how are they running are the lopey at all?any tunning issues??let me know plz

i have BC 264 cams..... they arnt that loppy. idles smooth. i have an enthalpy tuned ecu. 264 durration gives you the power right i nthe middle of your rpms and all the way at the top.

[idahotuner]

changed the rear bushings today. took for ever we only did the passengers side. and it took two of us 6 hours about to do 7 bushings. but it is dont on that side and i dont have to mess with it again .

i am excited for my wheels tomorrow.