IAP kit has arrived!!!!!

Post by **GEO** » Fri Jul 22, 2005 4:55 pm

Mine gets shipped tomorrow. :-)

Post by **Florida240sx** » Sat Jul 23, 2005 8:50 am

Wish it would stop raining so I can finish.Everythign done except got to go get my IC pipes. and oil sending unit.

Post by **FloydS13** » Sat Jul 23, 2005 5:10 pm

not done yet god man, j/k anyway whats up bro. I need to ask you a question

Post by **Craving4Boost** » Sat Jul 23, 2005 5:21 pm

i know what you mean florida....i dont care if i got my own garage to work in..rain just puts me in a bad mood

Post by **Florida240sx** » Sun Jul 24, 2005 4:49 am

Crystal blue skys at the moment.Think today is going to be a good day.Well off to hopefully finish it today.

Post by **Florida240sx** » Sun Jul 24, 2005 3:01 pm

Things were goign smooth until it rained.Then when I went back out everythign was goign wrong and I started to throw tools.Decided to quit after i sliced my hand open with a flathead screwdriver. Only thing left is hook up the DP and mount the IC.Still tryign to decide on if i should put in the 370cc's or 555cc's. Goodnight every1.

Post by **GEO** » Sun Jul 24, 2005 3:26 pm

LOL. 370cc's for now.

Post by **AZhitman** » Sun Jul 24, 2005 6:49 pm

Why would you even consider bigger than 370's?

Dude - Less weather reports, less freaking out, less throwing tools, and more putting the kit together the way it was designed....

Post by **SlIp'n'sLiDe** » Sun Jul 24, 2005 7:48 pm

wow remember me, lol still waiting on parts from b/d to finish my kit

Post by **GEO** » Sun Jul 24, 2005 8:56 pm

Yeh, listen to the Hitman.

Post by **AZhitman** » Mon Jul 25, 2005 6:47 am

I wish we had dropped them before you ordered it... What a clown.

I'd advise getting as much of your $ back as possible, as soon as possible.

Post by **PalmerWMD** » Mon Jul 25, 2005 6:59 am

SlIp’n’sLiDe wrote:wow remember me, lol still waiting on parts from b/d to finish my kit

Fred..

Post by **Jookmasta** » Mon Jul 25, 2005 8:07 am

put in the 555cc's. trust me, u'll thank me later.

Post by **GEO** » Tue Jul 26, 2005 9:15 pm

god dman update?

Post by **Craving4Boost** » Tue Jul 26, 2005 10:49 pm

GEO wrote:god dman update?

yeah and pictures too damnit

Post by **RedRacerX** » Wed Jul 27, 2005 3:45 am

Hmmm I might have to give Marc a call sometime. Hopefully I will see him when he comes out to install AZ's Kit

Post by **Florida240sx** » Wed Jul 27, 2005 10:18 am

Here's some current pics. My hole cutout is over board. I was goign by what someone else dad to do and started there.I got a little bit more timming to do maybe 1" But what i did was like 3x too much. Well going to install injectors and my IC so I can crank her up. Can't wait to hear my system again...and feel the sweet boost for the first time Fitment of the MR dp is great.Only issue I had was need of washers for the bolts due to MR has such big holes in their pipe.Fitment is pefect though for me.http://nissaninfiniticlub.net/...t=500

Post by **dft24ds** » Wed Jul 27, 2005 5:22 pm

wash your engineLOL...but no...looks good man keep us updated, I'm about to crap myself waiting for the numbers from that thing

Post by **Florida240sx** » Thu Jul 28, 2005 3:39 am

Evertime I get sick I want to order so more parts. Right now after talkign to Marc I'm going to leave the stock injectors in.Can't use the 555 do to the fuel rail is different and can't find the right bit to take injectors out.Got my hot pipe and cold pipe installed. About 5 more minutes of grinding I should be set.Only thing left is oil feed line, mount the ic, and run the vaccum hoses.

Post by **GEO** » Thu Jul 28, 2005 6:46 am

nice, just got mine today

Post by **Gofast1** » Thu Jul 28, 2005 4:43 pm

GEO- I hope the box was in much better condition?

Post by **Craving4Boost** » Thu Jul 28, 2005 4:47 pm

getting good buisness now eh marc

Post by **Florida240sx** » Thu Jul 28, 2005 5:04 pm

The box was perfect from what geo said earlier. Marc it would of been running tonight if my battery wasn't a pos.Got to go buy a new one.

Post by **virus77** » Thu Jul 28, 2005 5:37 pm

You need to get that engine bay cleaned up asap. Looking good though.

Post by **Florida240sx** » Thu Jul 28, 2005 6:05 pm

Pointless to clean my engine bay...Until everything is finished...My friend was sayign to use mineral spirits in a sprya bottle the hose oof my engine?Or should I use degreaser and a rag?Intercooler is aligned a bit better now. But here's the most recent shot.

Post by **DammitBobby** » Fri Jul 29, 2005 2:16 am

Is it the picture or is your intercooler at an angle??

Post by **Florida240sx** » Fri Jul 29, 2005 4:30 am

Florida240sx wrote:Intercooler is aligned a bit better now. But here's the most recent shot.

Didn't read my entire post?I don't have it mounted.Off to fix it, my exhaust, and get a new battery

Post by **DammitBobby** » Fri Jul 29, 2005 4:37 am

No not really. It is a long one!

Post by **RedRacerX** » Fri Jul 29, 2005 8:30 am

Man we need some posts from Marc about the kits these people are installing hehe. Maybe a hey try this out.

Hope I get to meet him in Aug.

Post by **Florida240sx** » Fri Jul 29, 2005 9:55 am

I've been on the phone with him numerous times. Everything that could go wrong has happened to me.So feel free to ask me. I'll take pics for ya.

IAP kit has arrived!!!!!

Re: (Florida240sx)

Re: (Florida240sx)

Re: (SlIp'n'sLiDe)

Re: (SlIp'n'sLiDe)

Re: (GEO)

Re: (RedRacerX)

Re: (Florida240sx)

Re: (GEO)

Re: (Gofast1)

Re: (virus77)

Re: (Florida240sx)

Re: (Florida240sx)

Re: (rseabrooke)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums