Project "Baller"

Post by **HighwayStar22** » Wed Dec 24, 2008 6:03 am

I'm voting for the ban hammer.

Seriously, who goes on holiday when there is a delivery like this? The masses demand pictures to placate them. Bread and circuses!

Post by **meminto** » Sun Jan 04, 2009 11:53 pm

Allrightty...

I now have motor at home, been a while since it has been on stands lol, will be assembling bolt ons tomorrow..

Hydra, got your measurements mate, the manifold has runners that are slightly angled. The measurments are as follows for the length (from runner start to flange end):

Top = 64.7mmBottom = 75.8mm

Anyways here are some shots, will probably have some more frequent updates now:

Post by **NUT-CSE** » Mon Jan 05, 2009 12:13 am

Ooooooh!!!! Ahhhhhhh!!!!

This makes me want to get off my *** and build my CA! Got a 4 port head on the way from UK. Cant wait!

Post by **themadscientist** » Mon Jan 05, 2009 1:42 am

real clean, diggin the hammertone finish on all the covers.

Post by **float_6969** » Mon Jan 05, 2009 4:00 am

You beat me to it TMS! That looks great!

Post by **r34 gtr** » Mon Jan 05, 2009 12:48 pm

Hotness. Is she single?

Post by **meminto** » Mon Jan 05, 2009 2:17 pm

Here is a couple more shots of the cams, you can see the work that went in to ensure the lobes spun freely lol..

And a better shot of the lobe..

Back to work..

Cheers

Post by **DALAZ_68** » Mon Jan 05, 2009 7:51 pm

ohh god my pants....there a bit sticky

Post by **themadscientist** » Mon Jan 05, 2009 9:39 pm

DALAZ_68 wrote:ohh god my pants....there a bit sticky

Watching the view again? Your sick obsession with Barbera Walters disturbs me.

Post by **DALAZ_68** » Mon Jan 05, 2009 9:42 pm

themadscientist wrote:
Watching the view again? Your sick obsession with Barbera Walters disturbs me.

hey atleast barbera walters WAS hot at one point, ur obsession with whoopie goldburg is just straight out unholy

Post by **themadscientist** » Mon Jan 05, 2009 9:52 pm

It's all about rosie man.

Post by **hydra** » Mon Jan 05, 2009 10:02 pm

Lovely work meminto, congrats! And I hope we see that engine running - and running HARD very soon!

Say did you ever get around to flow-testing that head?Would you also be as kind enough as to measure the sub-manifold's runner length so I can get a feel for the overall runner length used? I would venture to guess that its in the ~9-10cm range...

Post by **meminto** » Mon Jan 05, 2009 11:57 pm

Yeah I am still waiting on the email from my engineer as they only just got back from christmas.. Info on flow data and cam specsheet...

The mesurement of the runner is 82.64mm

Cheers

Post by **meminto** » Tue Jan 06, 2009 12:17 am

Here are some shots of the bottom end, will be sealing the sump tomorrow...

I have an issue withe the manifold, I need to cut the flange and reweld to change the mounting angle of the turbo..

Cheers

Post by **ca18datsun510** » Tue Jan 06, 2009 12:44 am

cam lobes look scored and pitted.

is that fuzz?

Post by **meminto** » Tue Jan 06, 2009 1:56 am

No not pitted, and no fuzz..., there is a straight score mark on a couple of lobes, not deep, just a mark...

They are straight off the machine...

I am not worried about it...

Post by **r34 gtr** » Tue Jan 06, 2009 7:42 am

Plz dyno sheet, and you never answered me, is she single?

Post by **meminto** » Tue Jan 06, 2009 12:31 pm

lol, yeah man totally single...

Dyno sheet will be available shortly..

Post by **meminto** » Tue Jan 06, 2009 6:53 pm

Finished off some more today..

Post by **ragenasian** » Tue Jan 06, 2009 8:42 pm

Post by **LEE_08** » Wed Jan 07, 2009 4:22 am

deffinately looks the part m8! keep up the good work

Post by **meminto** » Mon Jan 12, 2009 9:53 pm

Achieved a little more today, did some polishing too...

The cas came up looking pretty good and a once over on the mounting bracket..

Assembled some of the lines, will do some more over the next few days...

Cheers

Post by **NUT-CSE** » Mon Jan 12, 2009 11:12 pm

Work faster god damn it!!!!!!!

Post by **meminto** » Tue Jan 13, 2009 12:37 am

I am working as fast as I can...

lol, I am kinda slow

Post by **karism** » Tue Jan 13, 2009 3:28 am

Excellent work!

Iam really getting excited about it!

Post by **r34 gtr** » Tue Jan 13, 2009 2:57 pm

Post by **ivatar** » Tue Jan 13, 2009 3:47 pm

Exellent work i love it. Good luck.

By the way can you tell me the part numer of ARP main stud, ARP head stud? i will appreciate

YouTube · Post by **MeanGreenS13** » Tue Jan 13, 2009 5:00 pm

part numbers are listed in FAQ's. do some looking and read on your own like the rest of us.

Post by **DALAZ_68** » Tue Jan 13, 2009 5:17 pm

is that the Ebay CA mani...hows the fitment, im looking into getting it soon

Post by **ca18detgabby** » Tue Jan 13, 2009 5:22 pm

holy crap that is unbelieveable.

tim, even if she was single........ you know you could never please her.

Project "Baller"

Re: (hydra)

Re: (NUT-CSE)

Re: (DALAZ_68)

Re: (themadscientist)

Re: (DALAZ_68)

Re: (meminto)

Re: (hydra)

Re: (ca18datsun510)

Re: (r34 gtr)

Re: (meminto)

Re: (ragenasian)

Re: (NUT-CSE)

Re:...

Re: Re:... (ivatar)

Re: Re:... (MeanGreenS13)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums