ARTICLES = CUSTOM TITLES!

[dickie]

With all of the input we have been receiving from this section as of late, I thought it would be a good idea to make a sticky where you can post your DIY's, Writeups, Guides, and Information that will be converted to articles for Nico eventually.

This way should make it easier for you to submit your content and for us to monitor and collect it.

If you have posted an article-worthy writeup and I have not contacted you or posted in that thread letting you know, please email me at [email protected] and I will update you. All non-article posts within this thread will be deleted. Thanks!

Keep cranking it out

[le_ryan]

you prolly should have labled this "Post your articles here" or somethin like that.

Umm, heres mine again if ya need it, if not then trash my post.

Lit sleepy eye mod zer...14767

[dickie]

think we got that one covered, but thanks for the bump . and the suggestion.

[adrianfromthecastle]

wasnt there another thread with a list of write-ups already made?jdm sidemarkers

[meangreens14]

just want to give a heads up that i am doing a rear subframe nismo bushing overhaul on my s14. ill be posting information and tips with what to and not to do in proper order. this should be inofmative as most people will not fuss with pulling the subframe themselves. with this soon to be write up you too, can have near solid rear subframe bushings. i also will be doing a write up on how to change your radiator and use two fans (one push, one pull) to blanket the entire radiator with cool air. so again, just a heads up on whats coming soon for you s14 diy-ers.

[glitched]

zer...85793

[kouki munster]

My s13 dcc write up

zerothread?id=160285

[Dano]

OEM S14 rainguard install:zerothread/205926

HOW TO: HID's for your INTERIOR --- Ver: TRUNK LIGHT:zerothread/208763

-Dan

[dickie]

i just remembered this: if you have created an article and would like a custom title, please let me know. i cant access your user name to change it, but i can make a list and send it to an admin.

thanks guys.

[Dano]

I can change titles, only after your approved to get one by d!ck

-Dan

[dickie]

adrians13 was the first to contact me, his custom title needs to be,

coffee addict.

thanks dan! and since you have contributed so much, does that mean you get mutiple titles?

[le_ryan]

sir d!ck If my lit sleepy eye mod was article worthy, then i would like Locura controlada for my title .. (its spanish for Controled insanity)Thanx

[adrianfromthecastle]

cool, imma coffee addict

[meangreens14]

!!!!!UPDATE!!!! so in my attempt to get the car back on four wheels i encounterd an issue...the shop is taking forever to change my subframe bushings!!!! so here's my advice (and yes this advice will be in the write-up) make sure the shop knows that they can fullfill your needs before you go to them with your task. also. make sure that they are comfotable in doing the work for you. i found out that the shop i took mine to has not even used the press in years, and that they have never changed subframe bushings on a 240 s14 chassis before. so just know going in that whom ever you get to press out and in the bushings knows their ****. more info once i get this damm project done!

[s13redtaz]

cool, imma coffee addict

nice! im loving the new titles! i want one now...just gotta think of a write up or sumphin similar...

[amolao]

Please run spellcheck on vroom-chirp's custom title......

Is this worthy of one???

zerothread?id=96108my name shall be: "El viejo"......just kidding...something like "original owner", "shift_ stock",etc....

[JNM240]

How bout this for an MSD install?

zerothread/209561

Jason

[le_ryan]

Please run spellcheck on vroom-chirp's custom title......

!!! Why, is it not right ?! I just pulled it from a translation page.

[neverlift]

hook it up d!ck you said you would put it in the articles diy spin turn knob. zerothread?id=208587

also brought over info on the ec3 with launch control.

[adrianfromthecastle]

hook it up d!ck you said you would put it in the articles diy spin turn knob. zerothread?id=208587

i read that one... pretty clever.

[AZhitman]

Good stuff guys - keep 'em coming!

http://www.240sxTech.com is already THE source for good DIY's, it's getting better by the day!

[koukicody]

I've noticed alot of the articles have dead pictures. I think the NICO article managers should have their own photobucket/imageshack account to host the pics from. Its hard to follow the write-ups when the people are trying to explain things with a big red X.

[AZhitman]

^ Good catch. We'll be working on that as well...

All of the moderators have accounts with iServe, and I'd encourage everyone to look into getting their own iServe account with NICO - especially for those of you who do a lot of pic posting.

[amolao]

!!! Why, is it not right ?! I just pulled it from a translation page.

Locura CONTROLADA........

[le_ryan]

Locura CONTROLADA........

AW CRAP! its already posted!, mods please fix me!

Boy do i feel like an a$$ Thanx amolao

[le_ryan]

Center arm rest modification

zer...10122

[nightkid86]

5 speed swap

zerothread/181139

it's stickied, but not articled

[dickie]

^ hell yeah, man! your writeup is detailed and has working pics. +1 for you!

[Dano]

S14 Kouki sideskirt install:

zerothread/210459

-Dan

[dickie]

hot damn!