Hey guys,
Sorry if this is repetitive on the rims category of discussion. I tried to review the thread completely to get info but still have some questions. So far I have learned the following:
1) Recommended offset - +35 to +45, +35 may be scary.2) Biggest challenge - Avoiding Fender Scrap3) Pivot angle4) That we're pretty safe for up to 20" rims as long as we pick the right tires.
BTW - Here is the wheel that I'm contemplating right now: They are R-1 Racing HYPE 19x8.5 +35 Offset
But, I'm not clear if the above size will work. My target is to put on 245/35R19's on the rims.
So, I guess what i'm asking is:
a) What do you all think about the rims (Go/No-Go?)?b) Will the above specs work? Specifically, Rim width increasing to 8.5" from 7.5", 35mm Offset, 245/35's(BTW - On 1010Tires.com I found an offset calculator that tells you the mm impact of a change in Tire width when compared to Offset changes.
http://www.1010tires.com/WheelOffsetCalculator.asp )
As always, your feedback is much appreciated.
-- Wind
Modified by windhaven at 10:51 AM 10/28/2007