 SR20DET Parts Guide (Page 7 has complete Parts Number Listing) | First < 2 3 4 5 6 7 8 > Last |
|
| Author |
Post |
Hijacker
240SX Moderator
Offline
13004 posts
'92 240sx Convertible
Olney IL
8-13-2003
|
Not sure about the rail spacer. I know the last time I tried to order those, by parts department ordered the wave washers on accident.For the banjo bolt copper washers, the oil and coolant bolts are different sizes, so all 6 won't be identical. I usually just take the bolts over to an auto parts store and buy copper washers to match.
-Bart
| Quote » | Originally posted by Movingviolation240
What hammer, all I see is a Poundometer, it's a percision adjustment tool. |
| Quote, originally posted by audtatious » | Hey wait. My balls don't hang too low yet  |
S13 Auto -> Manual Swap / My 240SX / Convertible Top Replacement / Silvia Fog Light Wiring / DIY: SR20DET Rebuild
Stacey L. Childs, NICO Mom
|
Mistaken
Offline
316 posts
93 240sx Coupe
Norridge Il
12-19-2006
|
| « Re: (Hijacker) | 9:51 AM 4/1/2008 |
|
Any chance of the part number on those bolts for a s13 sr?
|
grmreapr
Secret Squirrel
Offline
651 posts
89 rps13, 02 mazda protege
stewartsville nj
5-10-2007
|
| « Re: (Mistaken) | 11:10 PM 4/19/2008 |
|
im looking for the part number for the 3 layer metal exhaust manifold gasket dont even know if its a oem part but i think it is anyone know??
cicatrix manet (The scar remains)
|
positron_
240SX Padawan Learner
Offline
3568 posts
1993 Nissan 240SX Coupe SR
Starkville MS
3-21-2005
|
| « Re: (grmreapr) | 2:16 AM 4/20/2008 |
|
3 layer exhaust manifold gasket 14036-75F00.
"All Your Base Are Belong To Us!"S13 300ZX Rear Brake Install
S13 Wheel Stud Replacement
S13 Fender Brace Install
S13 Subframe Collar Install
S13 Power Folding Mirror Install
S13 KA24DE Engine Removal
S13 SR20DET Prep
|
Koshin
License to Ill
Offline
11393 posts
S13 Silvia K's, Y32 Gloria GranTurismo Ultima
Its not the tires screaming, its the tarmac....
2-13-2008
|
| « Re: (positronone) | 10:33 PM 4/20/2008 |
|
I need the part number for the coilpack bolts for a redtop. The bolt that holds the coilpack to the valvecover. I was told by someone that it is a "Japan only" part, havent heard that one before.
|
onecrazyfoo4u
Offline
963 posts
03 Type S
Lancaster CA
6-23-2006
|
| « Re: (caddylt1) | 11:18 PM 4/20/2008 |
|
No it's not, just your typical 10mm head bolt....same exact thread as every other 10mm bolt that's on this car. Not sure on the thread and pitch, just pull one out and take it to the hardware store to match it up. Your talking about the one that grounds each coilpack to the valve cover, right?
SOLD: 95 Zenki SR20DET Redtop....... 
|
positron_
240SX Padawan Learner
Offline
3568 posts
1993 Nissan 240SX Coupe SR
Starkville MS
3-21-2005
|
| « Re: (onecrazyfoo4u) | 2:53 AM 4/21/2008 |
|
Coilpack bolt replacements.
|
Koshin
License to Ill
Offline
11393 posts
S13 Silvia K's, Y32 Gloria GranTurismo Ultima
Its not the tires screaming, its the tarmac....
2-13-2008
|
| « Re: (positronone) | 8:59 AM 4/21/2008 |
|
positronone,much thanks my friend
|
Hijacker
240SX Moderator
Offline
13004 posts
'92 240sx Convertible
Olney IL
8-13-2003
|
| « Re: (Mistaken) | 11:32 AM 4/21/2008 |
|
| Quote, originally posted by Mistaken » |
Any chance of the part number on those bolts for a s13 sr?
|
Last time I talked to Nissan, they couldn't get those bolts. I had to buy them from a local auto fasteners store. They're very long M6 bolts, which are hard to come by. If you want, measure the hole and account for at least 1/4 inch of thread engagement and find them at a local hardware/automotive store. But first, try calling up Midway Nissan and talk to Mike Jones. If you explain exactly what you need, he can tell you if they're still available or not.
|
Zilvia33
Offline
268 posts
91 240sx Hatch SH
Lima Ohio
1-11-2007
|
| « Re: (Hijacker) | 1:48 PM 4/21/2008 |
|
does anyone have a parts number or a place where i can buy Valve cover gasketwill a FWD SRDE gasket work
|
Hijacker
240SX Moderator
Offline
13004 posts
'92 240sx Convertible
Olney IL
8-13-2003
|
I seem to refer to page 2 of this thread a lot for parts numbers. p/n is 13270-52F00. It is a RWD specific part and there is no US equivilant. The best pricing I've found is from Courtesy Parts.
|
White Comet
type x fanboi
Offline
18565 posts
fc, s13 and mazda3 (owned!!1!)
lancaster Pa
6-15-2006
|
| « Re: (Hijacker) | 6:20 PM 5/30/2008 |
|
i searched through most of this thread for a part and i think my problem is, i'm not sure what the part would be called. maybe a water neck or something? i need the metal piece the upper rad hose goes into that goes under the cas. if it's already posted and i'm too dumb to figure out the correct name, i apologize. it just want to be sure
door panels hatch sunroof | Quote, originally posted by Logan76 » | | I swing it around like a helicopter and all the ladies want to go for a ride. |
| Quote, originally posted by mrgreeneyes » | sorry i cant satisfy you, jeff  |
|
positron_
240SX Padawan Learner
Offline
3568 posts
1993 Nissan 240SX Coupe SR
Starkville MS
3-21-2005
|
| « Re: (White Comet) | 3:25 AM 5/31/2008 |
|
Yeah, it's called a water outlet neck, I couldn't find a part number but here's one http://cgi.ebay.com/ebaymotors...37385 this one's for a S14 though.
|
White Comet
type x fanboi
Offline
18565 posts
fc, s13 and mazda3 (owned!!1!)
lancaster Pa
6-15-2006
|
| « Re: (positronone) | 5:30 AM 5/31/2008 |
|
yeah i did some checking then and found the s14 outlet. but i cant find the s13 neck anywhere. any ideas on where to find it?
|
positron_
240SX Padawan Learner
Offline
3568 posts
1993 Nissan 240SX Coupe SR
Starkville MS
3-21-2005
|
| « Re: (White Comet) | 5:40 AM 5/31/2008 |
|
Man you're right, everybody only seems to be selling the S14 neck now. They say it's an upgrade but what gives?
|
White Comet
type x fanboi
Offline
18565 posts
fc, s13 and mazda3 (owned!!1!)
lancaster Pa
6-15-2006
|
| « Re: (positron_) | 2:39 PM 5/31/2008 |
|
really? will it even work on the s13 sr? i never really looked into it
|
positron_
240SX Padawan Learner
Offline
3568 posts
1993 Nissan 240SX Coupe SR
Starkville MS
3-21-2005
|
| « Re: (White Comet) | 4:11 PM 5/31/2008 |
|
Yeah, it's the same fit but it just has a port that is used for the water inlet turbo line whereas the S13 water inlet line wraps around the back of the block and connects. I thought about getting one of these because I thought you could use that port for a water sensor instead since I already have the water inlet line routed in it's original spot.
|
Hijacker
240SX Moderator
Offline
13004 posts
'92 240sx Convertible
Olney IL
8-13-2003
|
I don't think you can get the S13 neck anymore because Nissan discontinued it. As far as the S14 being an upgrade, I'd call shenanigans as it does the same job as an S13, you just have to block the coolant port.
|
positron_
240SX Padawan Learner
Offline
3568 posts
1993 Nissan 240SX Coupe SR
Starkville MS
3-21-2005
|
| « Re: (Hijacker) | 1:36 AM 6/2/2008 |
|
Question, could that coolant port be used for a water temp guage? If so, then I'm gonna get a S14 neck.
|
White Comet
type x fanboi
Offline
18565 posts
fc, s13 and mazda3 (owned!!1!)
lancaster Pa
6-15-2006
|
| « Re: (positron_) | 5:01 AM 6/2/2008 |
|
^ thats what i heard, but i havent seen it confirmed
|
Hijacker
240SX Moderator
Offline
13004 posts
'92 240sx Convertible
Olney IL
8-13-2003
|
If you get the right thread/pitch probe or a bung to mount a probe, I don't see why not.
|
jr.
Offline
55 posts
nissans x 5
irmo sc
12-14-2005
|
| « Re: crank angle sensor | 7:48 AM 6/2/2008 |
|
| Quote, originally posted by Hijacker » | JDM part number
Cam Angle Sensor: 23731 - 50F02Not sure if there's a US equivilant for it.
The P/N for the CAS is on the cap, so this is for those of us who never received a CAS cap |
are these the same as the se-r & g20 fwd engines have?
91 SE-R (r.i.p.)
96 KC HARDBODY
96 200SX SE-R
91 240SX SE COUPE
05 SENTRA SPEC-V
07 CC FRONTIER
|
Hijacker
240SX Moderator
Offline
13004 posts
'92 240sx Convertible
Olney IL
8-13-2003
|
No. SE-Rs and G20s use distributors. As far as I know, there is no known US equivalent
|
jr.
Offline
55 posts
nissans x 5
irmo sc
12-14-2005
|
| « Re: (Hijacker) | 11:34 AM 6/6/2008 |
|
how about the valve cover gasket and oil pan gaskets. also front and rear seals. I saw part numbers but are they the same as the fwd sr20.
thanks!
|
Hijacker
240SX Moderator
Offline
13004 posts
'92 240sx Convertible
Olney IL
8-13-2003
|
There are dealers (Courtesy, West Covina) that order off the JDM catalogue and keep RWD valve cover gaskets in stock.
|
Zilvia33
Offline
268 posts
91 240sx Hatch SH
Lima Ohio
1-11-2007
|
| « Re: (Hijacker) | 2:13 PM 6/30/2008 |
|
okay i know a i can use a KA TPS, which takes some soldering... no biggiebut what about USDM SRDE TPS.... OR vg30 tps.... will either of those work..... does anyone know..... also about the fuel filter.. i know it say 90 Twin Turbo... but are all VG30DETT fuel filters the same or are the older ones smaller?
|
Hijacker
240SX Moderator
Offline
13004 posts
'92 240sx Convertible
Olney IL
8-13-2003
|
I don't think the US SR TPS will work. Don't know about the VG30, but I'm going to venture and say probably not.Using the KA TPS doesn't require soldering. It should be plug and play since the SR and KA use identical harness plugs. You will need to swap the throttle bodies because the two use different ways to turn the sensor with the throttle.
|
x240xdrifter
surfacedragon
Offline
2722 posts
of garbage....pure, straight up garbage.
Wolfeboro NH
11-27-2004
|
| « Re: (Hijacker) | 10:28 PM 8/9/2008 |
|
can fwd sr20de valve seals work on a rwd sr20det?
http://www.fujiispl.com<----FUJII SPL is where its at!!!!!!!!!
TEAM NICOHAULICS # 5
|
moyea
Paddle Shifted 240SX
Offline
371 posts
Paddle Shifted 92 240SX SR20DET, 02 Frontier S/C, 90 240sx ITA
CO
8-21-2004
|
| « Re: (x240xdrifter) | 9:06 PM 9/8/2008 |
|
 Anybody know what these washers/gaskets for the fuel rail are called? Part number? Where to get?
Owner of the World's First and Only Paddle Shifted 240SX
http://forums.nicoclub.com/zerothread/181884
http://moyea.zoints.com/
Automatic Transmissions Ultimate Guide:
http://forums.nicoclub.com/zerothread/167131
|
onecrazyfoo4u
Offline
963 posts
03 Type S
Lancaster CA
6-23-2006
|
| « Re: (moyea) | 10:15 PM 9/8/2008 |
|
Those damn things get lost so easily, I just used 3 regular steel washers under them....same exact thing. Plus those are like 3-4 bucks a piece if you want to order them.
|
moyea
Paddle Shifted 240SX
Offline
371 posts
Paddle Shifted 92 240SX SR20DET, 02 Frontier S/C, 90 240sx ITA
CO
8-21-2004
|
| « Re: (onecrazyfoo4u) | 7:50 AM 9/9/2008 |
|
What about those big black gaskets that hold the injector into the intake?
|
positron_
240SX Padawan Learner
Offline
3568 posts
1993 Nissan 240SX Coupe SR
Starkville MS
3-21-2005
|
| « Re: (moyea) | 9:19 AM 9/9/2008 |
|
I think the ones on a KA are the same, unfortunately I don't have that engine in back anymore so I can't check it for sure.
|
duffman1278
Moe Man
Offline
6381 posts
89 240sx Hatch, the wildcats!
The Mutha Land ca
4-1-2007
|
If their the ones that go into the counter bore type of thing on the intake manifold, then yes, their the same as the KA. I believe you HAVE to get them from the KA24DE not the single cam. I replaced those on my SR and I remember talking to justin from west co nissan and him telling me it wasn't a JDM only part.
|
positron_
240SX Padawan Learner
Offline
3568 posts
1993 Nissan 240SX Coupe SR
Starkville MS
3-21-2005
|
| « Re: (duffman1278) | 5:38 AM 9/10/2008 |
|
Justin is cool.
|
swinter
Offline
20 posts
8-29-2003
|
| « Re: (ecbreakk11) | 1:58 PM 9/13/2008 |
|
do you know what size M6 bolt it is?
M6x1.0/30?
|
swinter
Offline
20 posts
8-29-2003
|
| « Re: M6 bolts for the coil pack cover | 2:01 PM 9/13/2008 |
|
Sorry, should've been more specific in my last post...
I lost the screws (bolts) for the coil pack cover. One of you posted that they were M6, but I'm not sure of the thread pitch or the length. Can anyone help with that?
|
positron_
240SX Padawan Learner
Offline
3568 posts
1993 Nissan 240SX Coupe SR
Starkville MS
3-21-2005
|
| « Re: M6 bolts for the coil pack cover (swinter) | 2:03 PM 9/13/2008 |
|
M6-1.0x20mm
|
swinter
Offline
20 posts
8-29-2003
|
| « Re: M6 bolts for the coil pack cover (positron_) | 4:21 PM 9/13/2008 |
|
You the man positron. Cheers!
|
all4sho
Offline
194 posts
1995 Nissan S14 w/sr20det swap
Byron GA
8-17-2007
|
| « Re: (moyea) | 10:42 AM 9/15/2008 |
|
| Quote, originally posted by moyea » | | What about those big black gaskets that hold the injector into the intake? |
those are injector insulators part # 16635-53J00 any dealer can get them for you list price $2.23 each
1995 Nissan 240sx SE (Daily Driver), w/S13 SR20 Blacktop, S15 T28 Turbo, S15 444cc Injectors, Nismo FPR, Walbro 255 Fuel Pump, Competition Clutch, Custom 1pc Drivehaft, '96 J30 VLSD, Custom Intake Manifold, 2.5" Fmic w/Custom Black Piping, Tial 50mm BOV, Z32 Maf, Apexi Neo AFC, Greddy Profec B Spec II, Greddy Turbo Timer, Auto Meter 2" Phantom Boost Gauge, 3" Exhaust, Greddy Catch Can, KYB Struts/Shocks, #1 1.8" Drop SpringsPAUL WALSH NISSAN PARTS DEPT (478) 784-6892 or E-mail parts@paulwalshnissan.com    
|
TRBOMOFO
Offline
833 posts
S13.5 built redtop
Morgantown WV
10-3-2006
|
| « Re: (SpeedRacer1) | 10:49 AM 9/27/2008 |
|
| Quote, originally posted by SpeedRacer1 » | | Intake valve stem seal: 13207-DA201 found on many Nissan engines including B13 Sentra SR20DE's. $3.54 Exhaust valve stem seal: 13207-2B500 found on many Nissan engines including S13 and S14 KA24DE's. $3.86 |
will these work in the SR20DET and what are the Diameters that need to be in there?
|
| First < 2 3 4 5 6 7 8 > Last |
