whats a good standalone system for the SR ?

[IanS]

I did not ask for your help and I looked for almost a week all over the internet including factory service manuals and there is not a FREE source out there. You are the one who dishes out on peps when they ask questions on multiple threads repeating the same old search crap over and over again. There must be a reason why you have an s13 redtop motor in your s14? I do not know what that is but I think I know. It is a WHOLE lot easier of an install than an s14 series 2 motor into a USDM s14.

Ease of install had nothing to do with it, I chose the redtop because I weighed cost/benefit. When I swapped, the newer gen engines were very expensive, and their advantages over the S13 engines were minimal.

You spout off how you are nice to people in other threads when you repeat the same old song and dance. I basically got tried of your repeated zero post thread and decided to say something about it to reduce the absolute crap that you find on this board.

Same old song and dance? Show me one time I told someone to search, where the answer was not incredibly easy to find, I stay out of wiring threads because I'm no good at wiring, you on the other hand, seem inclined to dig your grubby little fingers into everyone's business, even when you know nothing.

Yes new ones go forth and search for then you will find the answer in which you seek. The answer is just to keep searching because we do not KNOW the answer or we are too lazy to post it.

I'm not entirely sure what crawled up your butt, buy you may want to get that checked out, it seems to be making you awfully bitchy.

[Clawhammer]

Wow. It's like revenge of the newbs in here except they're just digging themselves deeper.

And isn't there something in 240sxtech that tells you how to do cruise control on an SR swap?

Oh and perhaps S13 SR's are cheaper than S14's? Just an idea. People have been doing SR swaps for how many years now? You don't think this has all been covered? I guess your next thread will be "Will z32 brakes fits on my s chasis???"

For me, and I'm sure most of the members way older than myself...we don't expect you to know everything, but atleast try to help yourself first.

[koukicody]

http://www.diyautotune.com

[TTaylor]

Wow. It's like revenge of the newbs in here except they're just digging themselves deeper.

And isn't there something in 240sxtech that tells you how to do cruise control on an SR swap?

Oh and perhaps S13 SR's are cheaper than S14's? Just an idea. People have been doing SR swaps for how many years now? You don't think this has all been covered? I guess your next thread will be "Will z32 brakes fits on my s chasis???"

For me, and I'm sure most of the members way older than myself...we don't expect you to know everything, but atleast try to help yourself first.

yah im a total newb but this guy seems to have everything pretty strait. Consider it?

[IanS]

yah im a total newb but this guy seems to have everything pretty strait. Consider it?

The way I see it, being a newb has little to do with post count, or join date, a real newb will always be so, Miguel is a perfect example.

[migsk8]

Ture... however it makes you look like a jackass.

idk what happened up there ^^^^ but im not getting into it. but your saying im a jackass for having questions?????? ok fine whatever you say but i still have questions and im going to ask them if i feel the need

[migsk8]

The way I see it, being a newb has little to do with post count, or join date, a real newb will always be so, Miguel is a perfect example.

wait wait wait, **** you buddy. i got your newb hangin

[migsk8]

The way I see it, being a newb has little to do with post count, or join date, a real newb will always be so, Miguel is a perfect example.

why are you not here yet, im waiting so you can come hold my hand while i build my next SR. come come come we have many fun adventures ahead of us

[Clawhammer]

The way I see it, being a newb has little to do with post count, or join date, a real newb will always be so, Miguel is a perfect example.

I agree, I mean I lurked these forums for 3 years before joining...I think newb is the wrong term here....I think you mean lazy *****.

[240_SeX]

idk what happened up there ^^^^ but im not getting into it. but your saying im a jackass for having questions?????? ok fine whatever you say but i still have questions and im going to ask them if i feel the need

And you will continue to look like a jackass, Its really dperessing that you lack the maturity and intelligence to figure something out on your own. Why dident you build a honda, as others have state they are really really nice and im sure they will provide you wil the analingus you so urgently request

[240_SeX]

You spout off how you are nice to people in other threads when you repeat the same old song and dance. I basically got tried of your repeated zero post thread and decided to say something about it to reduce the absolute crap that you find on this board.

Yes new ones go forth and search for then you will find the answer in which you seek. The answer is just to keep searching because we do not KNOW the answer or we are too lazy to post it.

If you dont like it here why dont you leave, there are many other Nissan fourms that you could lessen with your wimpering and unproductive posting.

If we dont know anything why do you ask us??

[shift_SRDETuser]

If we dont know anything why do you ask us??

Again I did not ask a question --- I was taking up for someone who did and started this thread because it ended up like all the other threads on here with newbie flaming.

You guys kill me and that is why I generally have just read here and not posted. I do not ask questions here since I know what I can do and what I want. The flaming that you throw at people that post new information or looking for help is just ridiculous. That is why there is no guide to certain things and a general lack of information on certain topics.

[IanS]

Again I did not ask a question --- I was taking up for someone who did

I told you before, you should keep your mouth shut about that which you do not understand. I'm done arguing with you as it is obvious you will never see truth.

A word of advice, next time you want to defend someone, make sure they are worth defending.

zer...14174http://forums.nicoclub.com/zer...38876 zer...age=1

Oh, and by the way, you never answered my question.

Same old song and dance? Show me one time I told someone to search, where the answer was not incredibly easy to find

[tramp_drift240]

LOL @ thread.

migsk8 is a damn idiot.

FULL.

OF.

WIN.

[project90]

LOL @ thread.

migsk8 is a damn idiot.

FULL.

OF.

WIN.

THIS

thanks for the chuckle FBI

[redtop91]

What a waste. Where is Hijacker when you need him?

[shift_SRDETuser]

I meant no disrespect to you and hey you make your living off of these cars it is just all a hobby for me. ASE certification is very respectable to me.

As far as a computer - I would just look at AEM-- the best system would be to tune to your modifications to your specific applications but the down side is it costs 1000-1500 bucks plus dyno tuning.

My car is coming along quite nicely -- I have one of those black HKS BOVs and I am going to powder coat the turbo plumbing black-- ultimate stealth....

[240_SeX]

I told you before, you should keep your mouth shut about that which you do not understand. I'm done arguing with you as it is obvious you will never see truth.

A word of advice, next time you want to defend someone, make sure they are worth defending.

zer...14174http://forums.nicoclub.com/zer...38876 zer...age=1

Oh, and by the way, you never answered my question.

Careful, he can bea the sh1t out of you...

[jr_ss]

why are you not here yet, im waiting so you can come hold my hand while i build my next SR. come come come we have many fun adventures ahead of us

That's just it though, you're trying to buy someone else's completed 400rwhp engine setup. You don't have the balls or know how to do it yourself. I'm sorry, but you do look like a complete jackass throughout this thread...

[pflicht]

LOL @ migsk8..

[Sabot]

[migsk8]

That's just it though, you're trying to buy someone else's completed 400rwhp engine setup. You don't have the balls or know how to do it yourself. I'm sorry, but you do look like a complete jackass throughout this thread...

its comes out cheaper to buy the engine already built dumbass. do the math then come talk to me. besides if you want me to build it so bad why dont you give me the money. thats right, so sit the **** down

[migsk8]

I meant no disrespect to you and hey you make your living off of these cars it is just all a hobby for me. ASE certification is very respectable to me.

As far as a computer - I would just look at AEM-- the best system would be to tune to your modifications to your specific applications but the down side is it costs 1000-1500 bucks plus dyno tuning.

My car is coming along quite nicely -- I have one of those black HKS BOVs and I am going to powder coat the turbo plumbing black-- ultimate stealth....

i think thats why im gonna buy apexi power fc, its a bit cheaper and the shop around here can tune it

[IanS]

I meant no disrespect to you and hey you make your living off of these cars it is just all a hobby for me. ASE certification is very respectable to me.

As far as a computer - I would just look at AEM-- the best system would be to tune to your modifications to your specific applications but the down side is it costs 1000-1500 bucks plus dyno tuning.

My car is coming along quite nicely -- I have one of those black HKS BOVs and I am going to powder coat the turbo plumbing black-- ultimate stealth....

No worries man, Im not one to hold a grudge, I just dont like liars or thieves.

[Drunkendonuts]

wait wait wait, **** you buddy. i got your newb hangin

I really have my doubts, from the look of your posts your nuts haven't dropped yet.

[jr_ss]

its comes out cheaper to buy the engine already built dumbass. do the math then come talk to me. besides if you want me to build it so bad why dont you give me the money. thats right, so sit the **** down

It's because you're a cheap *** and don't know how to work on vehicles or make up your own mind about what you want. You want everyone else to hand you their ideas so you can use them. Be original douche bag and grow up.

Why the hell would I give you my money to build your motor, when you don't know how to spend it in a wise way as it is? Have you seen your 240? It's screamin' rice pilaf all over the place... You're full of fail even when people give you great ideas...

Drunkendonuts: bravo my friend, bravo...

[migsk8]

I really have my doubts, from the look of your posts your nuts haven't dropped yet.

dont talk, first off, speak when spoken to and second, you have no clue

[240_SeX]

dont talk, first off, speak when spoken to and second, you have no clue

Speak when spoken to? Who asked you to start all kinds of obscene threads that scream 13 year old prepubescent mamma's *****?

[IanS]

dont talk, first off, speak when spoken to and second, you have no clue

I would tell you to follow your own advice, but prior experience tells me you won't anyway, so it doesn't matter. Also, Im going to have to agree with DD, you may want to see your doctor, having an undescended testicle puts you at a much greater risk for cancer.

[240life]

As funny as this is to read I think it has gotten a little out of hand. Yeah he asks and doesn't search Fck it don't answer him problem solved. Reading and doing are the best ways to gain experience... lazyness will eventually get him no where, and if people stop feeding the troll eventually it will go away. In his defense..(i can't belive I am doing this) the search button does suck to use,..because most threads don't get finished or are B.S. like this one, although If you get off your A$$es and do some more research on line you would most likely find your answers. This site has plenty of resources available for almost any swap in a 240 or any mod. I myself have gotten some excellent help from Flatblackian and find him to be an asset to this community.
Modified by 240life at 5:42 PM 7/29/2008