What was done to your 240 today?

[Eion]

you know where collingdale pa is? i live like 4 mins from mahler engine shop.

[420sxWETDREAMS]

Cleaned up the stripped gunk!

[SoCal-S13]

yelled at her for pissing oil all the time. and kicked my ecu because it wants to flash the same codes over and over and over again even tho my egr is fine and i have a new maf.

[Nissan_Driver]

Restoration of Snow whites front bumper complete. Repaired all the damage. Made & installed new brackets for support, even bolted up a Deutschland license plate for the hell of it

[driftneil]

Installed my NEW main harness from wiring specialties! Also installed a nismo T stat, along with circuit sports hoses and pullies.

[nightsauce]

a few days back hit a curb dodging someone in the street. Today used a tree and a strap to pull my front rad support the 2 inches it was back. And everything magically lined up. I mean like 95% lined up. Even the fenders/bumper which sustained no damage lined up. EVEN THE HEADLIGHT BEAMS WERE LINED UP AGAIN!!!

next week:
1. New PS rack
2. install the other FLCA, tension rod and outer tie rod.

[Michaelmoore]

Swapped out the old bulbs in my gauge cluster for LEDs. Looks quite spiffy.

But they stay on all the time and my speedo is now a scizofrenic...

[nelson8708]

looked at it with a sad face as it sits in the garage with a un know electrical problem

[driftneil]

Started my SR!!

[nevertheless]

Started my SR!!

f uck yeah brother!

[costa_rican13]

installed front mudflaps, now i got all 4!!

[RedPanda240]

Told my car she better be nice because we want santa to bring us a carbon fiber hood for her stocking and not coal.

[driftneil]

Started my SR!!

f uck yeah brother!

Tell me about it....a car sitting in the garage that doesnt start is a tease....

[speedeast]

Tell me about it....a car sitting in the garage that doesnt start is a tease....

Tell me about it...

[wingFeather]

Picked away at ice so I could open the door, then scraped ice off the windows so I could get to work this morning...

[FlipCoupe]

replaced spark plugs with NGK platinums and replaced wires...checked fuel injector for cylinder 1 (its spraying) wondering why cylinder 1 isnt firing -.-

[island240_s13]

found a set of the classic stocks for 300z complete w/center caps and cassing slapped it on the hatch back and took it for a spin looked kinda wack but made me feel like O.G.!ha.

[feoo]

found out that my piggy is pissing fuel

[zerodameaon]

Bought some parts. Thanks Raw Brokerage.

[driftneil]

found out that my piggy is pissing fuel

Fuel tank gasket?

[scotty-2-forty]

Nothing, nothing and wait! Yeah, still nothing.

[Lobo240sx]

Water line plugged.


Need heat shield and turbo blanket.


Realized I didn't have enough room so I turned the turbo neck closer to the block. Sawed off my old hot pipe to get an idea for fabrication on how much space I really don't have.




Getting braided lines for the ones on the valve cover.


Peace.

[Lobo240sx]

Turbo off car

[FlipCoupe]

replaced spark plugs with NGK platinums and replaced wires...checked fuel injector for cylinder 1 (its spraying) wondering why cylinder 1 isnt firing -.-

Problem solved, head gasket. Advanced thanks to S13xCrazy for the vids ill be using to take off my head.

[nismoracingsx]

Bought another 240? First hb
Bought new brake mc, bought a shifter bezel, bought a braided clutch line, just installed a radio to replace the hacked up one.

Clay barred the coupe and waxed it for christmas travels

[feoo]

found out that my piggy is pissing fuel

Fuel tank gasket?

looks like it. the driver side strap is soaked in fuel. its a slow drip coming from about where the strap meets the front of the tank

[hartig]

started it for the first time in about a month! my lawn mower battery wasn't cutting it and my timing was really messed up. relocated the battery and fixed the timing.. in 20 degree weather too

[Eion]

yesterday wasn't freezing cold so i actually took off my intake manifold and inspect it for the leak; there's a damn hole before the bypass hose nipple! then swap parts that were missing on the new manifold from the old one. if it isn't as cold today or if i am bored out of my mind i'll decide whether i'll finish it or not.

[ciscos13]

overboosted my car. did a compression test and cylinder two is out. i have three weeks to tear apart the block before school.

[Eion]

overboosted my car. did a compression test and cylinder two is out. i have three weeks to tear apart the block before school.

good luck on that. i got 3 weeks to put my intake manifold back on and rebend the stud that's on the head closest to the firewall, otherwise i'd be done.