What was done to your 240 today?

[OutToWinPAHC]

Took it to verve motorsports and had a power brace made, and cleaned up under the car. Noticed something I am going to change.

[RB20Turbo]

Got a new boost gauge and installed it, wired up my boost controller, cleaned the interior and exterior, changed out my sway bar with a DC sway bar from my old integra, realized there is a hole under my stock wing and LOST MY FREAKIN MIND!!!! I was going to mount my carbon fiber Veilside spoiler... Stupid stock wing...

[Warped161]

vacummed all the leaves out of the engine bay and put my car cover back on. getting another care tent thing so i can work on it this winter. not sure why i work on it more in the winter then the summer lol.

[purestock240]

put some headlights on it and started prepping for paint

[the a3k]

installed a new ignition switch and greddy turbo timer. cleaned out the interior a little bit

[Hijacker]

Fixed a weird caster issue on my front passenger wheel. And prepping to do some cutting on my rear interior panels so I can finally reinstall them.

[s13_chris]

Ordered new clean white steering wheel from japan, hub, 3 yards x 5ft of black bandana fabric for interior , cutting and shortening my shifter, and new shift knob soon. I want aero

[RB20Turbo]

Painted my headlight frames, broke my MAF adapter then bought a new one, Got some new parts, moved my battery to a different spot in the trunk, got some lug nuts to finish of my 5 lug conversion.

[nismoracingsx]

Installed an LED ignition light, painted my wiper arms with a fresh coat of black.

[breadbox]

Realized how little cargo room my coupe has, to move a dolly that barely fit, I had to take off my head rest.

[dalzell240]

stared at it in the shop sittin on stands. im to broke to do anything right now and was sent the wrong ps rack so i cant do nothin

[costa_rican13]

put a zenkie lip on my chuki, now i want some coils. one more paycheck!

[JKL1031]

think i got my thermostat in properly. 20mins of driving with no overheting. spirited driving on bacstreets, turns and stops, no traffic, 70 deg. F weather. am i home free?

[JKL1031]

Nope. Guess I don't have to try n bleed it once it's out??

[nismokidd96]

intalled amber lights in my gauge cluster and super white LEDs for my tag lights

[novocaine]

continued removing the sound deadning material in the trunk. tomorrow will continue again this time with dry ice for the stubborn parts.

[JDM240SXcoupe]

I drove my 92 coupe to work. Also order obx header n a helmet for when its ready for driftin lol.

[madafye]

GOT IT RUNNIN FOR THE FIRST TIME IN 2 YEARS

[Michaelmoore]

Swapped my super cracked, filled with holes for oversized tach dash for my semi cracked much better looking dash. Also fixed the rat chew toy of a wiring harness I had under the dash.

[novocaine]

seafomed the s13. will post pics of the brake booster hose going into the manifold. cracked off some more of the sound deadning material in the trunk. almost ready for sanding and itching primer.

[98blackbell]

put a replacement sunroof in and going to put 12" sub with amp today!

[benz88]

changed the oil and filter, Switched brands of oil also to a better synthetic.

[Hijacker]

Continuing my new project of a reduced size front main harness. Removed all the pop up wires, A/C wires, and any assorted nonsensical wiring I have no need for anymore. Total number of wires reduced: 15

[PyR0NiAk]

Researched rods... Still can't find a sponsor who sells Manleys

[Nissan_Driver]

Pulled my front bumper off and sanded the terrible bondo work done to it. Oh and fixed my HID's

[speedeast]

Resolved idling issues.

[youtube]http://www.youtube.com/watch?v=bRtiP87AkEg[/youtube]

[breadbox]

pulled a motor and

1. replaced Clutch fork retainer clip
2. replaced Vacuum lines
3. Cleaned up in the bay a bit

And put it back.

[Jacototheb]

Pulled the flywheel off the block. Took the rotating assembly out of the block. About to take the block, head, and flywheel to the machine shop.

[Cody240]

Found a big hole in my stock muffler caused by the horrible back fires I was having because it was running rich and misfiring lol but now that i fixed those problems its time to get myself a new exhaust and catalytic converter.

[RedPanda240]

I found a hole in my muffle too, my hanger broke off when i was putting in new test pipe and down pipe.
Need to get that crap welded back onnn.