What was done to your 240 today?

Post by **biggie** » Mon Mar 28, 2011 12:13 pm

Yesterday got my header/cat on and finished removing emissions. Just a couple things to get it back on the road (and wait on warm weather, had snow/rain mix here today...????)

Post by **DanThaMan** » Mon Mar 28, 2011 3:11 pm

went to the junkyard and picked up a piggy lip, 248 cam, center console thing, nice hatch seal, and a few "free" bits of hardware for 27 bucks

Oh and finally sealed my tail lights

Post by **MyKAkillsV8s** » Mon Apr 11, 2011 4:22 pm

installed aem wideband, aem tru boost, msd 6al2, greddy map sensor, and greddy turbo timer

Post by **SoCal-S13** » Mon Apr 11, 2011 6:36 pm

got my led third brake light rigged up.

sprayed and cleared the wheels again

changed out the din pocket for this sweet one with a lid on it. cleaned up pretty nicely

Post by **mixeds14** » Tue Apr 12, 2011 3:50 pm

bought an lsd for her today, just waiting for the weather to be nice again n it be on there..

Post by **98blackbell** » Wed Apr 20, 2011 4:08 pm

Help the kid with a few projects on the car over the last month. Here is the list........

Installed Nistune with new consult cable(Base tune with z32 MAF upgrade)
Installed Z32 MAF
Installed AEM Air/Fuel Wide band
Installed AEM Water Temp Gauge
Installed AEM Tru Boost controller gauge(No adjustments yet, stock and is pulling 7.3 lbs boost)

He is going to sneak up a tune for it, maybe 12 to 14 lbs boost.

S15 notch black top

Now he needs to fix the A/C and speedometer and the car will be complete! Well he wants to upgrade the rear suspension and new front tires. With a McDonalds crew member pay it takes time to save money!

Post by **costa_rican13** » Wed Apr 20, 2011 4:12 pm

put my megan streets on well 4 days ago. lol today though gun metal e-brake knob and broadway 270mm mirror(no blind spots for me!)

Post by **ciscos13** » Wed Apr 20, 2011 5:11 pm

SoCal-S13 wrote:got my led third brake light rigged up.

sprayed and cleared the wheels again

changed out the din pocket for this sweet one with a lid on it. cleaned up pretty nicely

hey what springs or coilovers is your s13 sitting on?

Post by **alloverdajoint** » Wed Apr 20, 2011 9:44 pm

Well i brought my s14 ...3 days ago lol.
Today i fixed the timing, and replaced the seals, removed the nasty tint, cleaned the interior(cleanest stock SE interior) tightened up and fixed lose ends in the engine, fixed the intake and got it running smooth. started working on wetsanding for paint and also started making my custom wood shift knob (planing on doing a write up for this)

Post by **240sxcl50** » Sat Apr 23, 2011 7:10 am

oil change

Post by **biggie** » Sat Apr 23, 2011 8:24 am

Exhaust swap on Vert, Diff Rear cover swap on Coupe:

Post by pj » Sat Apr 23, 2011 11:03 am

changed out the window amp on s14, thank god...had to drive about 30 miles in the rain with the window stuck down

but now its fixed

Post by **Valiant240sx** » Sat Apr 23, 2011 2:24 pm

knocked down some surface rust from the interior where I had removed the stock sound deadening and sealed it up, next week I should have my new motor and the fixings to put it in, and hopefully get a new wingless hatch and new pass side door. I'm just a little giddy lol.

Post by **IKGamex** » Fri Apr 29, 2011 4:45 pm

Last week I removed all EGR, and installed a new obx header, magnaflow cat, and BRM exhaust

Today I put on a front strut bar; its amazing how much they reduce body roll.

Post by **Valiant240sx** » Fri Apr 29, 2011 4:58 pm

got my ka24de to replace the old ka24e, s14 seats, and de wiring harness.

also picked up a air compressor to make some of the work easier

Post by **ashibah83** » Sat Apr 30, 2011 10:31 am

i made this aluminum adapter for my lightning MAF, now i gotta get it welded to my cold pipe for my blow through setup, and i also did this.....

BTW i HATE wiring, but my new guages, knocklight, and wideband setup gotta go in right, lol

Post by **Caveit77777** » Sat Apr 30, 2011 10:43 am

I put my newly painted valve cover on and I'm about to trim my studs and install my spacers and wheel again. Rear main seal and spec stage 3 clutch will be going on tomorrow

Post by **mixeds14** » Sat Apr 30, 2011 5:38 pm

install my vsld today...

Post by **alloverdajoint** » Sat Apr 30, 2011 6:42 pm

Cleaned the whole bay and all lights crystal clear on the 14. Fixed the washer pump and soildered some sensors back. Removed a crazy amount of grime and put the front together. Got some
18s for cheaaaaaaapp and its time to get some
Low...

Post by **JDM240SXcoupe** » Sat Apr 30, 2011 8:05 pm

Bought her a brand new HKS hi powa! Exhaust...85mm yeaah baby!

Post by **gt28rsftw** » Sun May 01, 2011 2:06 pm

Sold that b**** hahahaha next is a 98 240 rb26 swap for me

Post by **POIZNES** » Sun May 01, 2011 3:20 pm

Put gas in it... don't park on hill with low fuel,lol! Took my headlights apart to see what's all in there... cleaned all the interior and exterior from is sitting the past few years

Plan on having my tires mounted on my welds tomorrow so I can roll on them and a very long paint/prep process bout to start

Post by **S14toRPS13** » Sun May 01, 2011 9:29 pm

Changed out my cluster bulbs to red. I want them to match my Red Defi gauges. I also threw on Carbotech brake pads and brembo oem replacement rotors at all fours.

Post by **DMan II-40** » Sun May 01, 2011 10:31 pm

Fixed the little plastic electric motor that controls the air mix door. Was making a stupid LOUD click noise underneath the dash. Finally the noise is gone 1.5 years later.

Post by **OutToWinPAHC** » Mon May 02, 2011 4:59 am

Took it to a meet, got an alignment, talked to some vendors

Post by **94_240sx** » Tue May 03, 2011 6:19 am

Did this mod last night.

Post by **ashibah83** » Tue May 03, 2011 7:17 am

made this, still gotta tap it for the fittings, 2- 3/8 inch ports and 6- 1/4 inch ports

Post by **POIZNES** » Tue May 03, 2011 4:14 pm

Threw the welds on until I get my new xxr wheels in like 6 weeks!

Post by **SoCal-S13** » Wed May 04, 2011 11:07 pm

ciscos13 wrote:
SoCal-S13 wrote:got my led third brake light rigged up.

sprayed and cleared the wheels again

changed out the din pocket for this sweet one with a lid on it. cleaned up pretty nicely

hey what springs or coilovers is your s13 sitting on?

I have HKS Hypermax III's

Post by **SoCal-S13** » Wed May 04, 2011 11:36 pm

ashibah83 wrote:
i made this aluminum adapter for my lightning MAF, now i gotta get it welded to my cold pipe for my blow through setup, and i also did this.....

BTW i HATE wiring, but my new guages, knocklight, and wideband setup gotta go in right, lol

hey bro ur pm is disabled but that din pocket I have is out of an Altima. not sure what year. I got it from a junkyard for 2 bucks. and it just bolts where the oem din pocket is, same screws and everything

What was done to your 240 today?

Re: what did you do to your 240 today

Re: what did you do to your 240 today

Re: what did you do to your 240 today

Re: what did you do to your 240 today

Re: what did you do to your 240 today

Re: what did you do to your 240 today

Re: what did you do to your 240 today

Re: what did you do to your 240 today

Re: what did you do to your 240 today

Re: what did you do to your 240 today

Re: what did you do to your 240 today

Re: what did you do to your 240 today

Re: what did you do to your 240 today

Re: what did you do to your 240 today

Re: what did you do to your 240 today

Re: what did you do to your 240 today

Re: what did you do to your 240 today

Re: what did you do to your 240 today

Re: what did you do to your 240 today

Re: what did you do to your 240 today

Re: what did you do to your 240 today

Re: what did you do to your 240 today

Re: what did you do to your 240 today

Re: what did you do to your 240 today

Re: what did you do to your 240 today

Re: what did you do to your 240 today

Re: what did you do to your 240 today

Re: what did you do to your 240 today

Re: what did you do to your 240 today

Re: what did you do to your 240 today

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums