Vday and HIDs

A General Discussion forum for Altima owners, and a great place to introduce yourself if you are new to the NICOclub Altima Forums!
generic808
Posts: 2537
Joined: Tue Jul 10, 2007 10:18 am
Car: '08 Infiniti G35 S
'10 Infiniti EX35

Post

No prob, that's what we're all here for. Glad you like your HID's!


User avatar
team_work
Posts: 115
Joined: Wed Feb 13, 2008 4:08 pm
Car: 2006 G35 coupe

Post

well installed hids today. went pretty good. took off the bumper. only thing bad so far is that the auto window up wont work....i dont know if its cuz i disconnected the battery or what. i will c how it goes 2nite and if it dont work guess go to the dealer.

generic808
Posts: 2537
Joined: Tue Jul 10, 2007 10:18 am
Car: '08 Infiniti G35 S
'10 Infiniti EX35

Post

Your window feature went back to default. All you have to do is with your engine off, turn on the ACC and with your windows rolled half way down, roll up and hold the window switch for about 5 seconds or so. This should enable your auto window feature again.

User avatar
team_work
Posts: 115
Joined: Wed Feb 13, 2008 4:08 pm
Car: 2006 G35 coupe

Post

thanks...save me a trip to the dealer. i will try it 2morrow. other then that the hid install went pretty smooth. only one other minor thing, the clip that went into the stock harness didnt connect right so had to get pliers and pull the wires through more to connect.

User avatar
07alti
Posts: 9
Joined: Wed Feb 20, 2008 5:36 am
Car: 07 Altima

Post

Hi- Do these sets include a relay? or does it even need one? I was reading on other forums where people had to redo their set up because the warning light came on for a blown light. Any ideas?

User avatar
team_work
Posts: 115
Joined: Wed Feb 13, 2008 4:08 pm
Car: 2006 G35 coupe

Post

they are working now...thanks!!

nifty
Posts: 70
Joined: Mon Dec 24, 2007 2:38 pm
Car: 08' 3.5SE Coupe w/CVT

Post

All this talk of HIDs has convinced me to buy some 5000k's as well . Let me get one thing straight though, there are two methods for installation correct?

1) Remove the bumper without removing the wheels

2) Jack up the car remove the tires and go in through the wheel well.

As I don't have a jack stand, I would like to use the first method, I just wanted to make sure that you can install HIDs solely through removing the bumper.


Return to “Altima General Discussions”