T3/T04E Questions

[Sil240]

NICE!!! I just checked out and subscribed.
You can check mine out on Chigga311

Nice setup!!! how is the Nistune?
Yeah I want cams but I already changed the valve springs to regular Z32 ones.
So I'd have to go for Pon cams.
Stock bottom end?

I can't wait till I get the new housing and Z32 maf and add some boost. Thinking around 20lbs
I have a Kazama copy I'm going to put on as well. Hopefully it'll hold up ok and line up with everything else.

[Yellow4g63]

Nistune is easy to use but I chose the path less traveled when I went with the Ford Lightning MAF blow through. My Rev limit is @ 8k but problems keep poping up so I can't seem to get a full boost pass @ 18psi. Stock bottom end also.

[Carl H]

sweet, glad you finally got a dyno...looks like you need a bit more timing on top end to take advantage of the setup.
afrs look pretty sweet tho.

[julio]

sweet, glad you finally got a dyno...looks like you need a bit more timing on top end to take advantage of the setup.
afrs look pretty sweet tho.

Any input on why he can't go to 8k rpms on 18psi Carl?

[Sil240]

Carl - Yeah I can't wait to get the smaller housing and next manifold on.
Hopefully that timing will help me out a bit

My next problem will be a diff some wider rubber.
I'm only rocking some 225's all around

Julio - Not sure why he never took the car to 8K but I would only guess because the Tach wasn't hooked up at the time???
Carl set my rev limit to 8 or 8200 i believe.
But it looks like the powerband was falling off at 7K any way.
I bet a mild set of cams would help me out some!!