Sweet drift car build BRO (Now with more SR!)

[Dizel01]

Lot of anger in this thread.

[troskinatior]

To be honest i can give a s*** less, about that piece of s*** he calls a car. My whole point is its not nice when people s*** on you, so he needs to act like he has since and stop s***ting on people on this website. He make a statement saying he is just being honest well im being honest. And if a stock clean exterior with paint is fugly, then what would you car be being that you have more rust than i can stand to look at. BTW fanboi my car is built not bought and if making my valvecover matching my car is a sr knock off then knock me off.

A couple of Nissan SR20's would pull a premium one week before race wars.

[Didderson]

Lol dale gg. "I'll turn this damn bus around!"

[hbpignosePA]

http://vimeo.com/7544058

single cams cant drift huh?

losnismo does nothing but cause problems

dougs car is cool because he doesnt care about the exterior; it was flawless before he ran into some bad luck w ppl hitting him.

[mrgreeneyes]

You can have your thread back now. Be nice ***hole

hey i found a cute teddy bear avatar like yours

im so excited to be like you

lonismos14. you have no room to talk about cars being not up to par. post up or shut up.

[JustDriftMore]

lonismo ive actually made a game out of checking how many times you use in every thread you post in, i lost count at 5 trillionz

[idahotuner]

Josh how about this one?

Modified by ILoveMyRHS13 at 1:49 PM 8/27/2009

what wheels are those

[White Comet]

mb battles

[Lonismos14]

hey i found a cute teddy bear avatar like yours

im so excited to be like you

lonismos14. you have no room to talk about cars being not up to par. post up or shut up.

My car is up to par no dents good paint. Fully rebuild motor w/turbo. Its not slammed though cause im not a jdm ffffaaaannnnbbbooiiii.

Gosh the s l i d e r s these days. O sorry i mean drifters. IM THE REAL DONKEY KONG b****!!!!

Naw but seriously im not even gonna keep going back and forth with yall cause thats just gay.

If you cant see that your boi has a problem with the way he leaves comments on people's thread, like he is almighty god, then f*** him and f*** you to im in albany ga come see me. Bring your crew too.

And if you noticed the only time i snap on people is when they act immature and ignorant.

Its not my fault his car doesnt match up to how he talks.

[mrgreeneyes]

My car is up to par no dents good paint. Fully rebuild motor w/turbo.

f*** you to im in albany ga come see me. Bring your crew too.

one, stock struts dont count as up to par. have fun planting that "massive ka-t" power with little to no footwork.

two, i know down in GAAAWGIA, its cool to ride high and not be low, but obviously priorities are a little different. i like to handle. you like to... um... well i dont know what people do without coils...... flop around like a Swahili riverboat?

[Lonismos14]

For now my suspension is strong, no need to change it unless it blows out. I use to think like you, slamming cars was jdm tight and s*** and s*** and s***. Coils is a big hype that im not following anymore, imma get a good strut and spring setup to my liking, your car doesnt have to scrape over every bump to perform idiot.

Sorry im not much of a S L I D E R . Dammit i mean D R I F T E R!!

[derrick113]

enjoy bouncing all around on your springs and struts! Also quit trashing his thread, he actually has some useful information in here.

[Bumnah]

enjoy bouncing all around on your springs and struts! Also quit trashing his thread, he actually has some useful information in here.

When your lower control arms point up it doesn't matter if you have JRZ or Moton's or blah blah blah you're handling is worse than factory.

[ILoveMyRHS13]

Eh, I guess it's time to update this.

The car has been running like s*** ever since the January "meet" and I knew it was the injector harnesses because I've had problems with them multiple other times. So what's the solution? Buy new ones. Bought some new o-rings as well.

Just an idea what we're working with. This is an injector harnessHere's the IACV.

So Keegan and I replaced the coolant temp sensor and all 4 injector harnesses with brand new ones. We're still getting around to the IACV.

Does it run on all 4 cylinders? No. Still on 3. Problem? Injector #3 took a s***. Either it's clogged or dead, I'll be replacing it with the spare injectors from my spare motor set. That will come next week. We got a major snow storm here and the injectors are a half an hour away at Keegan's house.

Now onto the cool things. Went to Jersey to pick up 4lughero's old Momo wheel. Ballin' son. Also got my Buddy Club seat rail in the mail, so what's that mean? Bride installation.

I removed the Sparco harnesses (they're for sale, hit me up) because I couldn't find any good mounting spots that won't kill me in several different ways without a harness bar.

Also got my HIDs in the mail today. Had to call off of work because of the snow, so Keegan and I installed those. While we were playing with lights we wired up the Hella fogs. Both bulbs were dead, so we had to go get new bulbs. s***ty things happened on the way back, but that's besides the point. Anyway, less talking, more pictarzzzz.

Okay, well, only 1 picture. Oh, and I also finally maxed out the camber in the front. That's all.

[JustDriftMore]

wow a momo steering wheel thats not gay...nice

[mrgreeneyes]

momo monte carlo.

the ONLY non hideous one.

the ONLY

[240lookis]

lookin good man. i need to get off my a** and do work.its those kind of jobs (injector harness, IACV) that slow down all work on my car. good job pushin through that.

[ILoveMyRHS13]

lookin good man. i need to get off my a** and do work.its those kind of jobs (injector harness, IACV) that slow down all work on my car. good job pushin through that.

Haha, dude, I am so unmotivated because it's cold. Once it warms up I'm sure I'll actually care about the car. Plus, I hate working on my car alone, something always seems to go wrong. So I usually wait for MGE to help because if I mess something up he can tell me 9 other ways to fix it by using a paper clip and electrical tape. He's the Macgyver of 240s.

[240lookis]

I feel the same way, but i dont have a 240 genius friend. So basically cold + no support = i dont get anything accomplished. That bride looks super nice though. I really gotta get a bucket... oh wait my car doesnt even run haha

[Ramonesfreak2010]

I'm guessing you got the HID's from sonic motor?

[Chris28]

Interior

I need to hurry up and install my seat. Right now it's being used as a couch addition for rad nasty mad awesome forza drifting.

[ILoveMyRHS13]

Interior

I need to hurry up and install my seat. Right now it's being used as a couch addition for rad nasty mad awesome forza drifting.

That's exactly what I used mine for until I got a rail.

[elchoccolatte]

Nice work!!!

[Gabes13]

OhYeah!!!

[White Comet]

momo monte carlo.

the ONLY non hideous one.

the ONLY

[mRodiek]

Whats the "IRONY" sticker from?

[ILoveMyRHS13]

Whats the "IRONY" sticker from?

ohtheirony.biz

[Lonismos14]

Fourlughero whats up with you and the p0rn.

[ILoveMyRHS13]

Slight update.

PBM Skid plate showed up along with S14 Ikeya Formula inner tie rods. Soon to be matched up with Moog outers.

Front hubs are in the mail. Wheels will be ordered soon. Tension rods will be ordered soon as well.



Oh and I got an ISIS shifter extender for $8.

Also added an NRG quick release. I don't have any pictures of that, though.

[nwmrkt]

nice shift extender, I got the same one too haha. Also I was wondering if you knew if the ikeya s14 inners would work with spl outers? I think they do, just want to confirm...