Official Altima Coupe Projector GB

[mcheddadi]

ok well I sent my money to brandon, but I accidently sent it without writing in my description of what I wanted lol...I hope that didnt mess him up. I dont think it will but I am not sure..crap I told you my luck sucks I jynxed myself I think

<--me slapping myself!!

I'm adding you to the list right now! *high five*

[3ugene]

I think your missing a few ppl.

[surmanm]

hey guys i dont know if anyone saw this but this is not right http://high-intensity.org/foru...t=716

this is what Cesar from lightwerz posted on his fourm about our master projector fabricator ..

not right im about to join his forum and spam the sh*t out of that forum.

[mcheddadi]

Please make another thread to discuss it, because I don't want this thread to get sidetracked .thanks

[mcheddadi]

I think your missing a few ppl.

Brandon's the one who tells me who to add. did you send your deposit? If you did I will confirm it with him and add you right up!

[dangeris]

RobPaulson has a good point regarding the Bi-Xenons. If one opts for the Bi-Xenon, what happens to the existing high beam? is that disconnected or does that also go on with the Bi-xenon lights?

[brandonbeeb]

OK so I had a few questions on this:

1. I have the stock HID's, but I want bi-xenon if im going to do this, does that require a while new kit, or just new bulbs for my high beams?

2. Demon eyes typically look best around the inside light (the two closest to the grill), is that light going to be the high beam or low beam in this setup?

3. Are the LED's mentioned here for turn signals? Can turn signals LEGALLY be white? DO you offer static LED's AND 'turn signal' LEDs in the same housing? (that may be a bit much eh?) Like the below pic but with an addition LED strip somewhere for the turn signal instead of a bulb?



hhmm i think that about covers my questions . . . i will be sending my deposit straight from my next check i hope. . .

1. you can use your factory hid bulbs, i just need to do a small modification to them.2. the low beam is going to remain in the same spot, its the main function and the highbeam is built into the low beam projector.3. led can be white depending on your state. for your other question send me an email about what you want done and i can get back to you about it

[brandonbeeb]

You know, this whole work thing is really getting in the way of my posting on NICO!

Brandon, Love your work and the prices so far. Far better than I've seen from other companies. I will be shooting you an email of what I would like done.

I'm assuming that there is still slots open for this group buy. If so, how much more? I saving up for my SFR turbo but I'm thinking of veering off a little and getting these for the coupe!

Brandon, if we opt for the Bi-Xenon setup, what happens to the OEM high beam since the projector will be taking it's place? I know you had mentioned that the dual setup will have a custom fiberglass housing, do you have pics of that? and also inthe OP, someone mentioned the "ironman" look with the white LEDs, do you have pics of that as well?

Thanks Brandon for your time and opportunity in making our dreams of projectors on our coupes a reality!!!!!

Hey for the dual setup i may opt to use 2 oem shrouds as it may come out a bit cleaner, its up to the buyers preference, either can be done, dont have any pics at the moment. in the oem igh beam spot i can use it as part of your turn signal or anything else you could want done to it (i.e strobe light for show cars)ill have some led pics up tonight im just finishing up spocks and the current set i have here

[brandonbeeb]

hey guys i dont know if anyone saw this but this is not right http://high-intensity.org/foru...t=716

this is what Cesar from lightwerz posted on his fourm about our master projector fabricator ..

not right im about to join his forum and spam the sh*t out of that forum.

thanks i appreciate the support guys. he did the same thing over at the subaru club when people started to go to me, he went on there and started to post things about my prices and hack jobs when the people on there loved what i was doing. i even told people about lightwerkz because he does good work, even though his prices are skyrocketed. thats one of the reasons i started this business, to help people get what they want for a reasonable price. I dont make huge money on these lights when you take into consideration the time and parts but i enjoy doing this and its nice to hear all the compliments i get for them. ill have some ironman led pics up in a bit and hopefully the stuff we do on your lights will put him in his place. i can even post pics of the second set of lights i did to show that my seems look about 4 times as good as his and the fact he said he used an oem hid light looks to me like its a halogen light

[brandonbeeb]

Guys sorry for the late responses i just got through selling my car so ive been tied up a little bit for the past few days, dealer is trying to find me a white coupe. Anyways if you have any questions send them to my email ill get back to you alot faster on [email protected]

thanks guys for all your support

[headhunt3r]

Guys sorry for the late responses i just got through selling my car so ive been tied up a little bit for the past few days, dealer is trying to find me a white coupe. Anyways if you have any questions send them to my email ill get back to you alot faster on [email protected]

thanks guys for all your support

Does that mean you're going to join the A/C crew!? I bet you have something super special in the works for your own car haha

[brandonbeeb]

ya i have some big plans for it, im comming from a fully sponsored wrx, built engine so i need to do something, i sent a few companies some emails to see what i can do. trying to get a supercharger done for the car, been talking to a few places about hooking me up, but well see what can be done

[brandonbeeb]

anyways guys here are some teaser pics, ill have some lit up led in the housing in about halfhour, im just waiting for the solder to cool down along with some other things. basically 4 led per light, soldered into a negative and positive with resistors so you can hook them up to your 12v source. remove the factory bulb for the parking lights, wires are fed through there for a clean look and all you have to do is clamp them onto the parking light harness with quick connects i can supply.gotta say i am a fan of the black and the led though

[brandonbeeb]

Hey guys here are some pictures that you have been waiting for plus a video to show you what these are like. to be honest im very impressed with the colour and the led, i think when i get my altima coupe i may just do this mod if i dont do projectors. so anyway here is my post dedicated to someone special who said none of this was possible.

Dear Lightwerkz,enjoy my "hack job"that is all-Brandon

Modified by brandonbeeb at 8:45 PM 9/9/2008
Modified by brandonbeeb at 8:46 PM 9/9/2008

[Infantry1327]

That is sick, I want. But one question, can 2 more led's be added and can those be turned into sequential turn signals. if they could go front to back, that would be rediculas. Granted I know a sequention turn signal kit would cost more. I have seen kits to turn led's into sequention lights for like 60-80 bucks.

[brandonbeeb]

ya i could probably do that for you, its just a matter of doing the kit, i wire it up for you so theres tons of slack to splice into it, that can always be done after the lights. im not sure if i would want to put anymore leds in, the amber lens is pretty flimsy to keep adding more holes. i was thinking about putting some on the side of the amber for the turn signals and the ones on the top as the running lights, then when you kick the signal on they both blink

[Infantry1327]

yea that might work, but might make that part a little to busy. Can you do running light leds in the front of the light, like the audi r8. or would that effect the projectors beam. something like this.



P.S. I just sent my deposit, so mcheddadi please add me to the list once brandon confirms it.I ordered deul projection headlights, black and chrome, the gattling gun shrouds, clear lenses, demon eyes, led running lights, and sequential led turn signal.

[domdada]

By chance...are one of those mine? If so..... I LIKES ALOT!! Oh, and by the way.....F**K Lightwerkz....he got a peice of my mind today.

Hey guys here are some pictures that you have been waiting for plus a video to show you what these are like. to be honest im very impressed with the colour and the led, i think when i get my altima coupe i may just do this mod if i dont do projectors. so anyway here is my post dedicated to someone special who said none of this was possible.

Dear Lightwerkz,enjoy my "hack job"that is all-Brandon

Modified by brandonbeeb at 8:45 PM 9/9/2008

Modified by brandonbeeb at 8:46 PM 9/9/2008

[adidas2go]

Alright bro, calm down with Lightwerkz. Had Caesar been a little more cooperative, he would have been the one making projectors for the altima coupe 3 months ago, and we would have never met Brandon. Take it as a blessing that the best outcome occurred

Brandon, the light look great bro! Glad to hear about you upcoming project. If you have anymore questions, feel free to email me. I have a large amount of contacts that deal with the a/c if you want some help

Blake

[Absolute Zero]

Deposit sent

Bi-Xenon setupFlat black housingamber leds (can I get the chrome bases painted black too?)6000k bulbs (I have the H11s, but I guess I need H2s or whatever is required)the "gattling gun shrouds" painted flat black or a brushed aluminum color if possibleCan I get the chrome center trim and the trim that goes around the turn signal painted a dark gray to give it some depth without being so shiny?

[Rolling Estonian]

nice, I like the LEDS. You do good work Brandon.

[brandonbeeb]

nice, I like the LEDS. You do good work Brandon.

Thank you

[mcheddadi]

added Infantry1327, Absolute Zero and 3ugene to the list

[Infantry1327]

3 spots gone, just like that. If you want lights then you had better make your deposit soon, before they are all gone. Then you will haft to go to lightwerkz and spend $2000 for a set

[brandonbeeb]

3 spots gone, just like that. If you want lights then you had better make your deposit soon, before they are all gone. Then you will haft to go to lightwerkz and spend $2000 for a set

haha im loving it (insert mcdonalds music)spots are filling up quickly, looks like with the amount of emails and people telling me there sending in deposits before the end of the week the group buy should be filled by sunday and then im going to put the last big order in, already got a jump on the lights, the spare sets are slowly getting here and as they do there getting torn apart. ill post a pic of one later to show you the seems compared to mr lightwerkz

[hangtime23]

hey mcheddadi...I just sent payment to Brandon, add me to the list once he verifies he received it!

[Infantry1327]

thats good, ime glad your orders are filling brandon, and I am glad that you where the one to step up and do this for us. So do you think it would be possible to do the Audi r8 running lights. Something like the flexible led strips that ozium makes.

http://www.oznium.com/flexible-led-strips

[maxentropy]

I'm still waiting till I see a finished two projector setup with the LEDs and demon or angel eyes installed before pulling the trigger.

Stillen's month o' discount just ended so plenty of folks are still fasting to make rent this month

[mcheddadi]

hey mcheddadi...I just sent payment to Brandon, add me to the list once he verifies he received it!

done! oh yeah!

[AzureCoupe0888]

This list is about 1/2 full. I cant wait to see the fight to make it when it gets down the the last spots. when only 1 spot is left there should only be 1 of 2 ways to earn it.

1. Fight to the death!!

Or the healthier way,...

2. Race, winner of course gets it!