my 240sx build up

Post by **playero_loko** » Wed Feb 25, 2009 9:25 pm

idahotuner wrote:going witha 4mm over bore. so i will technically have an sr22det.

DAMN!!! nice, are you going to have to get sleeves for those new pistons? i'd might like to do something like that if i could afford it... your car is gonna be sick bro!

Post by **Solow240sx** » Fri Feb 27, 2009 8:06 am

Looks good man, im an also going to be running a set-up close to yours but with a fullrace twinscroll gt35r and 96lb injectors, I was just making sure that the msd injectors will work with the AEM EMS, since they are low independence as long as you run the resistors...

Post by **playero_loko** » Sat Feb 28, 2009 7:22 pm

Solow240sx wrote:Looks good man, im an also going to be running a set-up close to yours but with a fullrace twinscroll gt35r and 96lb injectors, I was just making sure that the msd injectors will work with the AEM EMS, since they are low independence as long as you run the resistors...

yes, you need to have resistors what will keep them as side feed... otherwise you have to buy the injector box which allows you to run low impedence inj. i will prolly end up buying anyways as you never know how long will those resistors last under the hood you know what i mean

Post by **Solow240sx** » Sat Feb 28, 2009 7:38 pm

I will be running 96lbs in a jgy topfeed fuel rail, Where can you get an injector box?? So the top feed injectors will work fine with resistors and the aem ems???

Post by **brn-n-jpn** » Sun Mar 01, 2009 8:47 am

how long did it take you yo get your full-race kit after you ordered it

almost same full-race kit but with gt3071

Post by **playero_loko** » Sun Mar 01, 2009 7:36 pm

brn-n-jpn wrote:how long did it take you yo get your full-race kit after you ordered it

almost same full-race kit but with gt3071

i ordered it in mid december and didnt recieved everything else until mid feb... i still have gotten my other tail w.g. :i think they are a good company, but my god!!! do they take forever...

Post by **playero_loko** » Mon Mar 16, 2009 6:45 pm

a couple of more pics, hope you all like it... yall better!!!

the new seats, BRIDE!!!

front view

driverside view

180sx cluster with 180 mhp mod from import intelligence... even thew the white gauges for free!!! Matt, you da man bro!

lights on!!!

Modified by playero_loko at 12:47 AM 5/2/2009

Post by **idahotuner** » Mon Mar 16, 2009 7:14 pm

damn dude did you win the lotto to be able to get all of these fancy parts

Post by **playero_loko** » Tue Mar 17, 2009 12:09 am

idahotuner wrote:damn dude did you win the lotto to be able to get all of these fancy parts

man, you're the one getting work done by mazworx!!! nothing is more expensive/better than that

well right now, my current sponsor is hooking me up!!! (uncle sam) got me in kuwait/iraq so money is good , plus getting promotoed to SSG only makes it that much sweeter
Modified by playero_loko at 3:31 AM 3/17/2009

Post by **playero_loko** » Tue Mar 17, 2009 12:30 am

Solow240sx wrote:I will be running 96lbs in a jgy topfeed fuel rail, Where can you get an injector box?? So the top feed injectors will work fine with resistors and the aem ems???

yah it shouldnt be a problem at all actually... b/c all the aem is going to read is the volt coming from them not whats causing it, if you know what im trying to say...

Post by **positron1** » Tue Mar 17, 2009 2:46 am

Nice looking stuff man!

Post by **aznrib** » Tue Mar 17, 2009 4:11 am

nice build. I'm running on the same motor and trans mounts. Makes the car like a moving vibrator. Where did you pick up the interior carpet?

Post by **playero_loko** » Tue Mar 17, 2009 4:36 am

positron_ wrote:Nice looking stuff man!

Thanks bro, working very hard to have my ride looking pimp!

aznrib wrote:nice build. I'm running on the same motor and trans mounts. Makes the car like a moving vibrator. Where did you pick up the interior carpet?

thats what ive been told by my brother in regards to the mounts!!! if you have any question send him a pm alfredos13

as far as the carpet, this is what ive found as the best quality and price...

link: zerothread?id=400433

Post by **playero_loko** » Wed Mar 18, 2009 8:05 pm

The latest and greatest...

shifter and e-brake booths, from redlinegood.scom

shifter booth installed... i know what you're going to say, everything so nice in there but stock shift knob, WFT?! and im working on it right now! lol

Modified by playero_loko at 3:49 AM 5/2/2009

Post by **AlfredoS13** » Sun Mar 22, 2009 5:00 am

I guess I can post some pics too....

Here is rest of the suspension. The rest is already installed on the car.

Modified by AlfredoS13 at 11:01 AM 3/22/2009
Modified by AlfredoS13 at 11:03 AM 3/22/2009

Post by **idahotuner** » Sun Mar 22, 2009 7:50 pm

i like pics liek this with everything laid out.

Post by **MastaYu** » Tue Mar 24, 2009 3:52 pm

beast set up

Post by **Solow240sx** » Tue Mar 24, 2009 4:22 pm

Hey man u wouldn't happen to have any other pics of the Greddy manifold with the Q45 flange on it would ya?? Also wandering if u made the Q45 flange or where did you get it??

Post by **AlfredoS13** » Tue Mar 24, 2009 5:26 pm

Solow240sx wrote:Hey man u wouldn't happen to have any other pics of the Greddy manifold with the Q45 flange on it would ya?? Also wandering if u made the Q45 flange or where did you get it??

I don't have any other pics but what are you looking for maybe I can take some.

As far as the flange, We bought it from ebay, the guy I got it from does not have anymore posted on ebay but I found a different one that should work just as well

Here is a link

http://cgi.ebay.com/ebaymotors...ories

Post by **Solow240sx** » Wed Mar 25, 2009 5:23 pm

Hmmmm, i may have to order that, did you get the polished q45 throttle body off ebay as well?? I was just looking for some up close pics..

When u gonna get that turbo set-up on??? check out my build thread, i just ordered the same manifold your running!

Post by **AlfredoS13** » Fri Mar 27, 2009 3:23 pm

All new engine parts will going on the car tomorrow. stay tune...pics to come

Solow240sx wrote:Hmmmm, i may have to order that, did you get the polished q45 throttle body off ebay as well?? I was just looking for some up close pics..

When u gonna get that turbo set-up on??? check out my build thread, i just ordered the same manifold your running!

Yea, we got the Q45 TB off ebay. It was a great deal. It came polished and completly clean for $85.00. can't beat that

Post by **Solow240sx** » Mon Mar 30, 2009 6:44 am

Can't wait to see it all come together!!! Im still waiting on my set-up to shopw up from full-race hopefully it ships out this week something!!

Post by **playero_loko** » Mon Mar 30, 2009 8:55 am

Solow240sx wrote:Can't wait to see it all come together!!! Im still waiting on my set-up to shopw up from full-race hopefully it ships out this week something!!

me niether bro!!! it should all be ready to go towards the end of the months... we'd have done by now but trying to put in the full-race mani, we hit a dead spot since we had to disconnect the a/c lines and a couple of other thing before we could install it.

right now the engine is like half naked, no intake or exhuast mani's are on... both of them were a B*TCH to pull out. but here's a couple of pics of the coilovers install and new stace...

new coilovers and new sway bars.

front sways

adj rear camber

before height...

new height and stance!

new stance close up

Modified by playero_loko at 1:24 AM 5/2/2009

Post by **idahotuner** » Mon Mar 30, 2009 10:07 am

looks really good, just needs lowered on that fancy new suspension you have now.

Post by **AlfredoS13** » Mon Mar 30, 2009 5:16 pm

Alright Here is a little update for everyone...

Before removal

after removal

after install

Post by **Solow240sx** » Mon Mar 30, 2009 5:18 pm

Looks awesome man, u'll have to let me no how those coilovers ride/preform im probably going to run the same ones, once i get my car running and tuned..

Post by **playero_loko** » Tue Mar 31, 2009 7:55 pm

thanks bro! working on installing everything right now, got something done since m bro wasnt doing s*** at work! lol here's some of the pics.

solow make sure you start looking for a place to move the fuse box to, the greddy and q45 tb are to big to fit in the same area so one of them gotta go...(fuse box!)

then on the hot side, my bro is been telling me how tight everything fits. make sure you give yourself enough time to put everything in there otherwise you'll run out of time.

also as seen in the pics, the p/s reserviour needs to be relocated since it sits right in front of the compressor... not good, and the w/g is a pitta since apparent ly theres very little room there to work on them.

hope that can help you out a little solow!

so pics time!

manifold and wastegates

the mechanic!

on the manifold

turbo inlet 1

turbo inlet 2

greddy manifold

Greddy fuel rail and inj

Modified by playero_loko at 12:58 AM 5/2/2009

Post by **Solow240sx** » Wed Apr 01, 2009 4:52 am

Wow man your makin me jelous my stuff needs to show up!! Can't wait too see some pics with that huge throttle body on there!! And thanks for the heads up on the fuse box, i figued i would have to move my power steering resivoir.. I can't wait for my parts!!!!!!!!!!

Post by **JRPS13** » Sat Apr 04, 2009 8:21 am

wow looks great!! love that manifold.isnt the greddy fuel rail blue????

Post by **playero_loko** » Sat Apr 04, 2009 7:40 pm

JRPS13 wrote:wow looks great!! love that manifold.isnt the greddy fuel rail blue????

im sure that it might be... however i was reffering to the greddy mani and the fuel rail, which is from JGY. the confusion

my 240sx build up

Re: (idahotuner)

Re: (playero_loko)

Re: (Solow240sx)

Re: (playero_loko)

Re: (Solow240sx)

Re: (brn-n-jpn)

Re: (playero_loko)

Re: (idahotuner)

Re: (Solow240sx)

Re: (playero_loko)

Re: (positron_)

Re: (positron_)

Re: (playero_loko)

Re: (AlfredoS13)

Re: (idahotuner)

Re: (MastaYu)

Re: (Solow240sx)

Re: (AlfredoS13)

Re: (Solow240sx)

Re: (AlfredoS13)

Re: (Solow240sx)

Re: (playero_loko)

Re: (idahotuner)

Re: (idahotuner)

Re: (Solow240sx)

Re: (playero_loko)

Re: (playero_loko)

Re: (JRPS13)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums