Motor Mounts?

[iitywygms]

Nismo. They raised the motor about 1/2 inch. I blame that on the old motor mounts being trash.

[brizanden]

lol, yea your rite, im lying, i have no clue on how to install a motor in a 240, jezz...... n yes two hours is way more then enough time, lets see a empty engine bay, drop motor in, 2 motor mounts, and four transmission bolts later wow the motors in, wiring is two plugs, one into ecu and the other into the dash wiring, oh i forgot the 2 fuel lines, i dont have a/c or pwr steering so yea id say a lil under two hours ios good for me!

and the yall is from me being raised in high springs, yall is used more then id like it to be, and yes being a forum a$s isnt what i am, the as$ part is from other people bsing in posts n then me callin them out. n your correct im just a 20 year old kid, what could i possibly know?

you said swap not a drop in. taking out an engine and putting in a rb26 to make it run is not a 2 hour affair no matter what you claim.

[SullivanRacing06]

well ill give you my address and you can fly or drive here n ill prove to ne on that the 26-28 in my car def takes under 2 hrs, sorry a lift is involved, ive done this swap, or drop in as deusc! would like it to be called one to many times, sorry man u think what your want, go ahead n flame me, im still faster then you in the shop n on the street peace!

whats good? if you come here ill do ya one better, ill pull my 26 n put it back in in under 2 hours, lotfgl! take me up on this! come on, i need to spend more time with her lol!!!!!!!!!!!!!!!!!!!!!!

[White Comet]

you moron, of course you could remove and reinstall an engine thats already been installed once. but to take a 240 shell and rb26 and make that work is more then a 2 hour affair. after the engine and wiring are modified for the car, i'm sure you could remove it and put it back in with ease

[brizanden]

^shhh wc dont fight it.. he is faster then u even on da streetzzzz.

[White Comet]

oh noes, not da streetz

[SullivanRacing06]

damage to manifold!!!!!!!!!!!

[SullivanRacing06]

you know you owe me a ten second car, rite?



come on brian, wheres my ten second car???????????

and yes 2 hrs! about how long it takes with .... ...!

[White Comet]

if you work that fast in the shop, i can't even imagine how fast you work in the bedroom

[IanS]

There is so much shat flying around this thread I feel like Im in the monkey exhibit at the zoo.

2 hours my butt.

[iitywygms]

Yeah, and its all my fault because I am slow. For some odd reason I prefer to take my time and do things correctly. So yeah, you can bash me, special Nissan olympics and all, but when I do a job, I take my time and do it correctly. So you will never hear me bragging about how I am able to rush a job.I will leave that to someone who needs to brag and feel good about their mad skills, even when they are only fooling themselves.

[brizanden]

There is so much shat flying around this thread I feel like Im in the monkey exhibit at the zoo.

2 hours my butt.

thts cause ur a nub all real nico members know a rb26de TTTTTT is a cake walk

[babyjcwwjd]

Thanks for the helpful input. I know it's not a good start and I know there's only one way of putting them in. I was asking where on or around the motor they were b/c my buddy looked at it for a couple hours yesterday and didn't find the originals that we were supposed to replace.