Nitrus0nous wrote:dan, could you hook up prices for a new clutch, pressure plate, and flywheel for 89 240sx

Yes

The Disc is $44.99the plate is $89.99and the flywheel is $217.48

and you can find them all here:http://www.trademotion.com/par...gid=1

Thanks and let me know if I can help.

Nitrus0nous wrote:dan, could you hook up prices for a new clutch, pressure plate, and flywheel for 89 240sx

hey not trying to jack any thread but i got a 90 sohc ka motor that i pulled out the headgasket blew. i have a clutch left over with lots of life left . The flywheel is rusted cause i left the motor outside and it rained but i took the clutch in the house. I can take pics of them and im not sure but the flywheel maybe able to be resurfaced (not sure if it can but ill try to take pics if u are interested)

sorry no intention of jacking thread but just trying to help a fellow 240 guy out.

dantech wrote:No problem. Heres the sensor:http://www.trademotion.com/par...gid=1

and is it the hanger bracket you need or the insulator? which position also?

Hey Dan...this order just seems to be growing and growing. As we discussed I'd like to add the following:

1) 4 exhaust insulators (two at the muffler, one behind the muffler and one near the cat).

and...

2) Bolt for the valve cover of a 1993 Nissan 240SX, one of the small ones around the outside of the cover and *not* the big ones in the center.

if possible, could you quote me the following:

3) 1993 240SX rear brake caliper (both sides). Is this all sold as one part?

4) Copper washers for brake line to calipers (2 for each caliper, not sure if front and rear are different part #'s)

Thanks again, Dan. You rock!

BadMojo wrote:Hey Dan...this order just seems to be growing and growing. As we discussed I'd like to add the following:

1) 4 exhaust insulators (two at the muffler, one behind the muffler and one near the cat).

and...

2) Bolt for the valve cover of a 1993 Nissan 240SX, one of the small ones around the outside of the cover and *not* the big ones in the center.

if possible, could you quote me the following:

3) 1993 240SX rear brake caliper (both sides). Is this all sold as one part?

4) Copper washers for brake line to calipers (2 for each caliper, not sure if front and rear are different part #'s)

Thanks again, Dan. You rock!

You have all the other prices, right (vlv cover bolt and the hanger insulators)?

Well, looks like the calipers are $257 each and can be found here:http://www.trademotion.com/par...gid=1

The washers arent listed on the site but I can get you those also. Just add them to the comments when you order or let me know if you order on the phone.Did you want both front and rear washers?

dantech wrote:You have all the other prices, right (vlv cover bolt and the hanger insulators)?

Well, looks like the calipers are $257 each and can be found here:http://www.trademotion.com/par...gid=1

The washers arent listed on the site but I can get you those also. Just add them to the comments when you order or let me know if you order on the phone.Did you want both front and rear washers?

I don't have the price for the bolt, but that doesn't really bother me. I'll hold off on the calipers for now and I've actually got the washers all taken care of.

I'll order the coolant temp sensor, valve cover bolt and hanger insulators tonight. Thanks!

BadMojo wrote:I don't have the price for the bolt, but that doesn't really bother me. I'll hold off on the calipers for now and I've actually got the washers all taken care of.

I'll order the coolant temp sensor, valve cover bolt and hanger insulators tonight. Thanks!

Got your order. Thanks. You should see that in a couple of days.:thumbup

Hey Dan,

Just wanted to see if you could give me an update on my order? Have you received the car cover and Nismo knob yet?

VitaminT wrote:Hey Dan,

Just wanted to see if you could give me an update on my order? Have you received the car cover and Nismo knob yet?

Yes, finally got the car cover this morning. I was just waiting on my shipper to get me a tracking number to send you and then close the order. You'll probably have the number sent to you by the end of the day. Thanks again for the order.

Let me know if you have any more questions.

Super cool. Thanks.

Dan, any word on the clutch and pressure plate? could you add it to the other order or do i have to put in a new one?

Nitrus0nous wrote:Dan, any word on the clutch and pressure plate? could you add it to the other order or do i have to put in a new one?

I did. Let me know if you get that email with the price list on it.

hey dan. can u get me a price on s15 headlights. if you are able to get them. thanks.

Akito wrote:hey dan. can u get me a price on s15 headlights. if you are able to get them. thanks.

Sorry, I dont have those available.

Hi Dan, could you get me the price of the left and right headlight covers +shipping to 94534(mine are all yellowy ) for a 95 240sx?

cyrus240sx wrote:Hi Dan, could you get me the price of the left and right headlight covers +shipping to 94534(mine are all yellowy ) for a 95 240sx?

Those lens are here:http://www.trademotion.com/par...gid=2

There is a difference depending on whether your car was built before or after 12/95. These are just the lens and housing. There is an available complete headlight asm but if you just need the lens, this is the way to go. Thanks and let me know if I can help anymore.

<--- cant wait till he gets more money and some transactions done so he can buy some 5spd parts from Dan and Midway.

-Dan

How much for the PAIR pipe (copper pipe at the bottom of the PAIR system, connects to the header)? And a set of OEM plug wires?

Hey, when you gonna swing by the store, Dan?

InsanityInc wrote:How much for the PAIR pipe (copper pipe at the bottom of the PAIR system, connects to the header)? And a set of OEM plug wires?

What kind of car?

hiya, do you have the pic of the hood bumper (side) for a 89 240sx. i want to make sure its the right one, its the bushing that seats the hood even/properly.

sleepyRPS13 wrote:hiya, do you have the pic of the hood bumper (side) for a 89 240sx. i want to make sure its the right one, its the bushing that seats the hood even/properly.

Its not a good picture but its number 65823-28E00. Hope this helps

dantech wrote:Hey, when you gonna swing by the store, Dan?

your not there on weekends are u?

i have school from 130-830 everyday weekdays.

-Dan

Hey big Dan - Need all four rubber hood bumpers (round) for my S13.

I'll p/u my wheel studs as well...

Hey I have a rare car, 1990 Infiniti M30, having trouble finding some parts. I'm actually getting ready to order a speedo cable and a door jamb switch, but I also need the driver's side front turn signal and the driver's side front mudflap from the wheelwell. I'm sure you could look them up. I don't know if you sell them, but my car is also missing the trim around the radio as well.Thanks

I'm ready to order need a sway bar endlink 95 240sx and the bushings as well (4) for both sides.

240sx2nr95 wrote:
your not there on weekends are u?

i have school from 130-830 everyday weekdays.

-Dan

Im here from 8-6 weekdays, but not on weekends.

AZhitman wrote:Hey big Dan - Need all four rubber hood bumpers (round) for my S13.

I'll p/u my wheel studs as well...

Go wash your cat.

I'll have those set out for you if you want to pick them up on that early morning.

ill try to get out there one of these days that i dont have a bunch of crap to do b4 school

-Dan

KFL wrote:I'm ready to order need a sway bar endlink 95 240sx and the bushings as well (4) for both sides.

Great.

The link is here:http://www.trademotion.com/par...gid=1

The bushing number is 56112-A0100 and you can put that in the "notes/comment" area of the order.

Thanks a bunch.

240sx2nr95 wrote:ill try to get out there one of these days that i dont have a bunch of crap to do b4 school

-Dan

Let me know when your coming. I'll wash and iron the hat so it looks new again.(just kidding )