Internet = Wholesale OEM

Post by **iliketocrash** » Mon Sep 27, 2004 12:55 pm

i priced an oxygen sensor for a 300zx on your site and it has two list for two different prices but i don't know the difference between the two.OXYGEN SENSOR, 300ZX, All, Right 91-93 $71.58 $53.69 OXYGEN SENSOR, 300ZX, All, Left 91-93 $133.00 $99.75

Post by **MidwayParts** » Mon Sep 27, 2004 1:30 pm

iliketocrash wrote:i priced an oxygen sensor for a 300zx on your site and it has two list for two different prices but i don't know the difference between the two.OXYGEN SENSOR, 300ZX, All, Right 91-93 $71.58 $53.69 OXYGEN SENSOR, 300ZX, All, Left 91-93 $133.00 $99.75

Just different positions. They read oxygen levels at the different stages of exhaust. Heres a pic.

Post by **andrave** » Mon Sep 27, 2004 5:53 pm

what about those infiniti parts?

Post by **MidwayParts** » Mon Sep 27, 2004 7:25 pm

andrave wrote:Hey I have a rare car, 1990 Infiniti M30, having trouble finding some parts. I'm actually getting ready to order a speedo cable and a door jamb switch, but I also need the driver's side front turn signal and the driver's side front mudflap from the wheelwell. I'm sure you could look them up. I don't know if you sell them, but my car is also missing the trim around the radio as well.Thanks

Sorry bout takin so long.

The cable is here:http://www.trademotion.com/par...gid=1

The door jamb switch is here:http://www.trademotion.com/par...gid=1

The turn signal lamp is here:http://www.trademotion.com/par...gid=2

The mudflap is here:http://www.trademotion.com/par...gid=2

The radio bezel is here:http://www.trademotion.com/par...gid=2

Again, sorry about the delay. I hope this helps. All these links have the prices, just add them to the cart and your on your way. Thanks and let me know if I can help anymore, andrave.

Post by **iliketocrash** » Mon Sep 27, 2004 8:07 pm

dantech wrote:
Just different positions. They read oxygen levels at the different stages of exhaust. Heres a pic.

the picture doesn't work for me. i dunno why but i can't see those attatchments or whatever. i'm just curious as to why there's a price difference. do one of those two o2 sensors mount on an o2 housing?

Post by **MidwayParts** » Mon Sep 27, 2004 8:31 pm

iliketocrash wrote:
the picture doesn't work for me. i dunno why but i can't see those attatchments or whatever. i'm just curious as to why there's a price difference. do one of those two o2 sensors mount on an o2 housing?

Here, try this link.http://www.midwaypartsteam.com...TPN=1

The O2 sensors will screw into a direct link to the exhaust through either the manifold or the pipe in different positions. Each sensor has a different function. The closest one to the engine will monitor the exhaust readings at a rich state of dioxyde and the further from the engine you get, different sensors are needed to read different oxygen states. Im not really a mechanic but maybe you can ask NISTECH on the engine or car specific boards more detail. Since each sensor has a different function, they are required to be different sensors. Each O2 sensor relays readings to the ECM and is monitored/regulated by it. (Im starting to sound like Cliff Clavin now...I need to stop trying to explain this.)

I dont have a definite answer what makes each sensor different but I know that they are different sensors. Why one is more than the other, I cant really specify the differences in make but apparently, it costs more for Nissan to make the one sensor over the other.

Do you know which sensor is bad?

Post by **iliketocrash** » Mon Sep 27, 2004 8:47 pm

well i don't have a 300zx. i own a ca18det and i was told that i can get a 300zx o2 sensor to replace the one that's bad on the ca18det. i dunno which one to use though.

Post by **MidwayParts** » Mon Sep 27, 2004 9:36 pm

iliketocrash wrote:well i don't have a 300zx. i own a ca18det and i was told that i can get a 300zx o2 sensor to replace the one that's bad on the ca18det. i dunno which one to use though.

Try doin a search here at NICO on swaping that O2. What benefits are there to changing to a 300z O2 sensor?

Post by **KFL** » Tue Sep 28, 2004 3:44 am

QUOTE=dantech]

Great.

The link is here:http://www.trademotion.com/par...gid=1

The bushing number is 56112-A0100 and you can put that in the "notes/comment" area of the order.

Thanks a bunch. [/QUOTE]Thanks I ordered them and left a comment for the bushings

Post by **InsanityInc** » Tue Sep 28, 2004 7:48 am

dantech wrote:What kind of car?

91 240SX SE. PAIR pipe and OEM wires.

Post by **MidwayParts** » Tue Sep 28, 2004 9:49 am

InsanityInc wrote:
91 240SX SE. PAIR pipe and OEM wires.

The cable set is here:http://www.trademotion.com/par...gid=1

That PAIR hose is $23.71. It's not in the online catalog but you can order it with number 14861-40F01 in the comment area. Heres a pic

Post by **MidwayParts** » Tue Sep 28, 2004 9:51 am

Quote »Thanks I ordered them and left a comment for the bushings [/quote]Thanks for the order.

Post by **InsanityInc** » Tue Sep 28, 2004 10:05 am

The PAIR pipe is the part I need. 14B20M from the looks of that picture.

Post by **MidwayParts** » Tue Sep 28, 2004 10:09 am

InsanityInc wrote:The PAIR pipe is the part I need. 14B20M from the looks of that picture.

That pipe is $40.40 and is number 14821-53F00

Post by **iliketocrash** » Tue Sep 28, 2004 1:55 pm

dantech wrote:
Try doin a search here at NICO on swaping that O2. What benefits are there to changing to a 300z O2 sensor?

there aren't any benifets that i know of. i just need an o2 sensor for my ca18det because i can't buy oem parts for it stateside, so i need to find other parts that'll do the same job. i just need an o2 sensor that will screw into my o2 housing behind the turbo and do its job i tried asking in the ca18det forums which o2 sensor i need but now no one is talking about it or answering me. so i dunno.

Post by **InsanityInc** » Tue Sep 28, 2004 4:06 pm

That's the same price they quoted me at the dealer... I'll go to a junkyard for that one.

Post by **MidwayParts** » Tue Sep 28, 2004 7:25 pm

InsanityInc wrote:That's the same price they quoted me at the dealer... I'll go to a junkyard for that one.

Then your local dealer is quoting 25% off list. That could be helpful to the other members of NICO that live in your area if you let them know about this dealer. I show the list price at $53.87 which is what I sell it for on my retail counter. Thanks for asking though. Im here for any other questions you may have.

Post by **MidwayParts** » Tue Sep 28, 2004 7:37 pm

iliketocrash wrote: there aren't any benifets that i know of. i just need an o2 sensor for my ca18det because i can't buy oem parts for it stateside, so i need to find other parts that'll do the same job. i just need an o2 sensor that will screw into my o2 housing behind the turbo and do its job i tried asking in the ca18det forums which o2 sensor i need but now no one is talking about it or answering me. so i dunno.

I have a lead on an O2 sensor for the ca18det. What year and make is that engine out of?

Post by **iliketocrash** » Tue Sep 28, 2004 10:18 pm

i dunno. i'm pretty sure its a later model because its intercooled.

Post by **sleepyRPS13** » Fri Oct 01, 2004 1:23 pm

dan, i got wrong hood bumper, i guess its the front bumper i should have ordered. BTW why is shipping so high?

Post by **MidwayParts** » Fri Oct 01, 2004 2:50 pm

sleepyRPS13 wrote:dan, i got wrong hood bumper, i guess its the front bumper i should have ordered. BTW why is shipping so high?

I hit the mark pretty close on the shipping. I was off by about 66 cents. Tell you what. I'll ship the correct hood bumpers with free shipping. Just put this conversation in the comment box when you order to remind me.

Post by **MidwayParts** » Fri Oct 01, 2004 2:54 pm

iliketocrash wrote:i dunno. i'm pretty sure its a later model because its intercooled.

Havin a tough time tracking this down. That engine is imported and I dont have catalogs for Japanesse make cars like the 180sx. I'd keep checkin on the Tech boards. Someone in these forums has had a similar problem like yours.

Hitman was just in the store and I mentioned your situation to him. He seems to think any O2 that fits and has the same connector will work. Dunno. I'd keep tryin the tech boards, myself.

Post by **JustinStrife** » Wed Oct 27, 2004 7:40 pm

Not sure if you guys check this link or not anymore. But I'm looking for the whole dash(like where the passenger airbag sits) since I bought my 95 240sx in an insurance auction with both airbags deployed I'm in need of a new dash. Is this the correct part I'm looking for?

http://www.trademotion.com/par...gid=2

Someone wants 400 for a black dash and airbag in your area and I'm considering it if I can't get it cheaper. Help?

Post by **Re037** » Thu Oct 28, 2004 4:49 pm

hey dan i need the part number and nico price for all four dust boot covers. its the rubber cover that goes over the shock/strut valves

Post by **MidwayParts** » Fri Oct 29, 2004 6:31 am

JustinStrife wrote:Not sure if you guys check this link or not anymore. But I'm looking for the whole dash(like where the passenger airbag sits) since I bought my 95 240sx in an insurance auction with both airbags deployed I'm in need of a new dash. Is this the correct part I'm looking for?

http://www.trademotion.com/par...gid=2

Someone wants 400 for a black dash and airbag in your area and I'm considering it if I can't get it cheaper. Help?

I think your looking for this one:http://www.trademotion.com/par...gid=2

I might be able to help you out on that price a bit, also.

Post by **MidwayParts** » Fri Oct 29, 2004 6:34 am

Re037 wrote:hey dan i need the part number and nico price for all four dust boot covers. its the rubber cover that goes over the shock/strut valves

......fer what?

Post by **Re037** » Fri Oct 29, 2004 2:28 pm

pic,

http://www.hammondsplains.com/...9.jpg

^ i need the black strut boots, all four

oh yeah, 93 S13 fast back non-hicas
Modified by Re037 at 3:53 AM 10/30/2004

Post by **JustinStrife** » Fri Oct 29, 2004 3:04 pm

850 bucks isn't happening anytime soon for me.. I found a black used dash off an S14 in Arizona I'm going to try and get for half...

But there is a couple pieces I still need for my car. If I hadn't bought this car for 2k, there's no way I'd have been able to justify the expense it will be costing me lol

edit: Okay I need the center console plastic piece for the shifter since I'm going to be swapping to a 5spd from an Automatic. I'm not sure exactly what pieces are needed there. I'll post a couple of links though of where I think I'm at.

http://www.trademotion.com/par...gid=2

http://www.trademotion.com/par...gid=2

Am I missing anything else? Nobody else is selling them used. Also, because of the swap I'm doing, I will need an S14 m/t driveshaft because the 5spd swap I'm getting is from an S13. I browsed your site but got a little side-tracked as to what I needed there. (this project gets expensive on matter what i do)

Modified by JustinStrife at 4:05 PM 10/30/2004

Post by **MidwayParts** » Sun Oct 31, 2004 1:14 pm

Re037 wrote:pic,

http://www.hammondsplains.com/...9.jpg

^ i need the black strut boots, all four

oh yeah, 93 S13 fast back non-hicas

Modified by Re037 at 3:53 AM 10/30/2004

The fronts are 54050-35F01 and the backs are 55240-35F10. Just do a search from here:

http://www.trademotion.com/par...gid=0 and add them to your cart. Thanks and let me know if I can help anymore.

Post by **MidwayParts** » Sun Oct 31, 2004 1:17 pm

JustinStrife wrote:850 bucks isn't happening anytime soon for me.. I found a black used dash off an S14 in Arizona I'm going to try and get for half...

But there is a couple pieces I still need for my car. If I hadn't bought this car for 2k, there's no way I'd have been able to justify the expense it will be costing me lol

edit: Okay I need the center console plastic piece for the shifter since I'm going to be swapping to a 5spd from an Automatic. I'm not sure exactly what pieces are needed there. I'll post a couple of links though of where I think I'm at.

http://www.trademotion.com/par...gid=2

http://www.trademotion.com/par...gid=2

Am I missing anything else? Nobody else is selling them used. Also, because of the swap I'm doing, I will need an S14 m/t driveshaft because the 5spd swap I'm getting is from an S13. I browsed your site but got a little side-tracked as to what I needed there. (this project gets expensive on matter what i do)

Modified by JustinStrife at 4:05 PM 10/30/2004

Thats them. You ever think about becoming a parts guy? Let me know if I can help anymore.

Internet = Wholesale OEM

Re: (iliketocrash)

Re: (andrave)

Re: (dantech)

Re: (iliketocrash)

Re: (iliketocrash)

Re: (dantech)

Re: (dantech)

Re: (InsanityInc)

Re: (KFL)

Re: (InsanityInc)

Re: (dantech)

Re: (InsanityInc)

Re: (iliketocrash)

Re: (dantech)

Re: (sleepyRPS13)

Re: (iliketocrash)

Re: (JustinStrife)

Re: (Re037)

Re: (Re037)

Re: (JustinStrife)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums