Idaho Tuner's 240/|SR Build thread

[idahotuner]

yes i amnt visbly found it let but i know it is there lol.

[burntricer]

is it making like a fluttering sound? ill bet its your turbo to manifold gasket

[idahotuner]

you sir are very smart lol. i discovered today it is actually the gasket and am going to buy one tomorrow.

i did discover the turbo was only held on by 3 bolts and the 2 support bolts came out too. lol so i will replace those

[RCCC_DRiFteR]

lol ironicly last night on my way home I heard a bolt drop and hit the bottom of my car while driving. I'm kinda afraid to see what bolt it is lol....

[idahotuner]

lol you heard it fall off. that cant be good at all.

[supreamS14]

1 time I heard a wrench fall from my car! It sucks because it was a really nice 14mm ratcheting wrench. I heard it chiming and bouncing under my car. I looked back and seen it, so i turned around and looked for it for 15 minuets. I never found it

[RCCC_DRiFteR]

Sorry, I didnt hear it fall off. I just heard what sounded like a bolt or something hit the bottom of my car. It's still running fine. My guess is that it's either a bolt or socket etc. that fell outta reach during my swap and birated off the motor or I ran over like a bolt that was already in the road...hopefully lol. Where's the update?? you swap that turbo gasket??

[idahotuner]

i got one coming man. but i havent got the gasket

[cmoody2006]

Well I finally got my camera back from my sis and I uploaded all my pics that I had on it if you wanna check em out

[derrick113]

you bought a metal or copper gasket right? cause if not dont bother putting anything else on it will just burrnn up then you have leaky leaky again.

[idahotuner]

this new gasket is metal. and is going on tonight.

[RCCC_DRiFteR]

The bolt that feel off was a nut on the elbow/downpipe and I replaced it but I have an exhaust somewhere that I need to track down now too

[idahotuner]

got everything bolted back together. except for the hot pipe and intake. and catch can.

the turbo manifold was a PITA to bolt back up.

[derrick113]

yeah gotta love tryin to put the 2 nuts on the manifold beside the motor. I have my manifold and turbo out right now, ordered all new studs, nuts, locking plates from frsport. Little easier to put everything together at once and drop it down in the car and dont have to get all cut / scratched up from wrenching with no space. Hope everything works out for you man.

[idahotuner]

oh i know i pulled it out all together and i put it back in all together. now hopefully witha little tweak to the timing it will be ready to go again.

[mRodiek]

updates man?? lol

[idahotuner]

my injector rings are shot and i wont get new ones tell saturdya. buttoday i put some rear interior back in liek the back seats and panels. looks pretty damn good now.

[mRodiek]

that blows-glad its gettin fixed though man. i finally got my hands on an S13 shell! =Di tried lookin real quick but i couldnt find what size tires you have with the elite wheels, im pretty sure you said you had federal 595's...but what size

[idahotuner]

nice. my car is beinga pain. and i only have this week to figure it out.

[idahotuner]

sorry i was kinda distracted while making the last post. i am running 275/40 rear 335/40 front yes they are 595s

[mRodiek]

what happens aftr this week? lol isnt it the injector rings?thanks for the tire sizes

[idahotuner]

well the injector seal kit i got were missing the bottem o ring. thats what i get for trying to go the faster route. now i will have to wait even longer

[White Comet]

i am running 275/40 rear 335/40 front

[idahotuner]

did you see what time i made the post lol. 235 front

[mRodiek]

hahaha i assumed 235-didnt even pick up on it

[IanS]

So when do you expect to see the injector seals from phase2?

[tokendog]

Hey Idaho. Long time no see. Hows things going? I have been away for a bit due to the hurricanes but am back now and good to go.

Anyways, just wanted to say hey. :>

Post up some new pics of the car if/when u get the chance.

[idahotuner]

So when do you expect to see the injector seals from phase2?

tomorrow or wednesday. i gota refund for the other ones.

Hey Idaho. Long time no see. Hows things going? I have been away for a bit due to the hurricanes but am back now and good to go.

Anyways, just wanted to say hey. :>

Post up some new pics of the car if/when u get the chance.

yeha i have been noticing that you were not on aim very much. lol the car needs to get out of the shop so i can take some more pics hehe.

[dat411kid]

I think you should change your license plate to "Builder" not tuner...lol But man thats one hell of a build you got there car looks beautiful! "

[idahotuner]

I think you should change your license plate to "Builder" not tuner...lol But man thats one hell of a build you got there car looks beautiful! "

lol it goes with my name though thats why i got them. Idaho- Tuner