Discussion of E-Brake & Speed Sensor Override (instructions in "Stuck" thread)

[Timmbo]

It sounds like one of the wires are incorrect. You should really make sure the correct wires were cut. Triple check all the pin locations. Don't worry about the color of the wires, it is ALL ABOUT THE PIN LOCATION! Done correctly, you should not have any "issue"lights. GOOD LUCK!

[sidsharma]

Once i did a reset on the airbag sensor light, it has not come back again.

[Timmbo]

Good to hear! Did you notice that your Speed Sensitive Volume no longer functions? Not a big deal, but it no longer works.

[sidsharma]

Didnt notice that yet but since you have pointed that out, the next time i notice it, i will know why it stopped working.

[Timmbo]

Figured I would mention it, you could always go back and install a switch there, that way you can switch from "Stock" to "modified".

[PolarDog]

New guy here with an '08 EX35 with the Premium Package (with Nav).

I have read through this thread with much interest.

Just to confirm: I am interested only in enabling those Nav options that are greyed out while the car is moving (don't need the video option). If I understand correctly, I need only to modify VSS pin 38. With the modification I lose my speed sensitive volume (which is okay with me), but there is no Nav delay or tracking problems etc...

Do I understand correctly or did I miss something?

[kaidiem]

can somebody send me the mod instructions for the EX35?
[email protected]

Thanks in advance!

[Timmbo]

can somebody send me the mod instructions for the EX35?
[email protected]

Thanks in advance!

Here is a link to the EX35 FSM, this will show you where to locate the two wires.

http://www.nicoclub.com/FSM/EX/2008/

You need to cut the VSS wire, and the E-Brake wire and either install a DPDT switch or use the relay pack sold by member Tintmasters (Shane). Here is a link to the instructions of this same mod on the Armada / QX56:

08-10-armada-qx56-watch-dvd-s-on-your-n ... 01458.html

Good luck and let me know if you have any questions, I have done this mod on several vehicles, it is pretty straight forward.

[hrosenberg33]

Hello, new to the forum and this is my first post.
I am looking into this bypass but the thread posted by dividedhighw seems to be missing all the info from it. Is it possible for somebody to PM me or email me the instructions? Thanks a lot and looking forward to getting some great info on this site.

Cheers

Hans

[Timmbo]

Hello, new to the forum and this is my first post.
I am looking into this bypass but the thread posted by dividedhighw seems to be missing all the info from it. Is it possible for somebody to PM me or email me the instructions? Thanks a lot and looking forward to getting some great info on this site.

Cheers

Hans

Sorry for the delay!!!!!!!!! Welcome to NICOclub! Glad to have you here in the EX35 Forum! Please let me know if you have any questions on this, unfortunately the poster of those instructions must have had some issues with the hosting of the photos. Here is a link to the same modification in the Armada / QX56 Forum. I personally have done this mod on several Armada and Murano models. EX35 is the same, you should consult the EX35 service manual to pull the dash pieces apart. Here is the link to the Armada instructions:

08-10-armada-qx56-watch-dvd-s-on-your-n ... 01458.html

Here is a link to the EX35 FSM:

http://www.nicoclub.com/FSM/EX/2008/

Please let me know if you have any more questions!

[hrosenberg33]

Thanks a lot Timmbo!

Hans

[Mark Booth]

OK, the "stuck" thread that contained instructions for this is now blank. The posts have been cleared and the thread is not longer a sticky.

How do we go about getting the instructions for overriding the speed sensor for the 2008 EX35 with NAV?

My apologies, but the search features of this forum are not so hot (I can't find "Advanced Search").

Thanks!

Mark

[Timmbo]

Same instructions as the G37, Murano, or Armada/QX56

[nexien]

sorry to revive this old thread.
after getting the mod to work for the ex35 2008 video in motion is working and everything.. how ever airbag and sitbelt light are flashing anyone help me please
and thanks

[Timmbo]

Nothing wrong with reviving an old thread! This is a good thread!

One or both of your wires are grounded improperly. Make sure the two wires you cut are 100% correct. The two that you cut coming out of the back of the AV unit should go to a good ground. The other end of those cut wires need to be left connected to nothing.

Double check that and let me know what you find out, don't worry, we can get this working correctly.

[nexien]

everything works fine man thanks very much for your help!
much appereciated!

[Timmbo]

Awesome! Glad it worked, now enjoy!

[TonyN]

Hi, I'm currently trying to do this mod on my 2010 with nav/dvd. However all the threads I found does not have any pictures that are working.
Can someone please assist

[XIS]

I found the best info on this link....
08-11-armada-qx56-watch-dvd-s-on-your-n ... 01458.html