Thats actually the car that I had in my head when picturing how it would look with my drop...rodnick wrote:That's a good look! More like a wheel you will see on an AMG CLS not so much a Mopar. Looks like they added horsepower LOL.
I got all my lighting done local at http://www.thehidfactory.com except for the dome lights... I got two 36 led lights from a freind super bright!! The hid factory has all kind of lighting like undercar kits...babycharm00 wrote:hey where did u get the interior leds from, i have been looking about i dont want to order the wrong ones and be stuck. if u can,just post the link,thanx
On both of my 22" sets I got +38 offset on 22"x8.5".... So what size tires did you go with??jjcuff1 wrote:SWEEEEEET!!!!
What was the wheel offsets? I just returned my wheels and going with 20" on my 07 M35 and owner had hard time gotting staggered for my car where wheels wouldnt stick out. I needed a 45-50 offset and versanti vossen etc all where 35 so I went with Lexani 20-9 all around so I do not have to stagger rotate tires etc and they cut rim to +40 offset
Yea I see what you mean. I will probably just keep the ones on the door. Not to be a pain in the a** but if you have a clear and close up picture of the visors please post. Thanks for your help!The Bodyguard wrote:The chrome strip is the same size on all 6pcs for mine!![]()
As far as being the same size as the chrome piece on the car itself already?? Not so, for all of them. The chrome on the car is a lil wider but is less noticeable on the doors because they get completely covered up by the visors.... Not really a big deal IMO... I've seen the actual JDM visors and they only do the doors so you're good either way!!
Here you go! LMK if these are good pics for you....Hs_m35 wrote:Yea I see what you mean. I will probably just keep the ones on the door. Not to be a pain in the a** but if you have a clear and close up picture of the visors please post. Thanks for your help!The Bodyguard wrote:The chrome strip is the same size on all 6pcs for mine!![]()
As far as being the same size as the chrome piece on the car itself already?? Not so, for all of them. The chrome on the car is a lil wider but is less noticeable on the doors because they get completely covered up by the visors.... Not really a big deal IMO... I've seen the actual JDM visors and they only do the doors so you're good either way!!





I just ordered my roof spoiler about a week ago. I used "bc.moto" off ebay. I made another thread asking for help on that issue and many have bought from ebay just didn't specify which seller... They take a while to arrive since they come mostly from Taiwan but haven't heard of anyone getting screwed or anything like that. I will post pics of mine when I get it installed!!Hs_m35 wrote:Thanks for the pics! I installed my visors and the lip spoiler this weekend. I just added some 3m tape where i thought it was necessary. I also began the interior LED conversion. Finished all four doors and the trunk. Car looks great now.Next is the roof spoilerand changing the exterior lights .... I've seen that you posted previously about the roof spoiler, you got any good sellers in mind?




Since you are new you are restricted to PM's but you'll be able to pretty soon... Just keep posting up and you should get clearance...Where are you shopping for wheels?? I would honestly recommend both but your tire selection is key, especially on the 22"!! Staggered on 20" are your best bet(more rubber) although some have gone 20"x9.5" all four corners for tire wear and rotation purposes...I'm in Katy north off Fry rd. But work on the SW side...I haven't had the chance to get on here a much as I use to but I check it from time to time....my schedule is crazy most of the time but we can hook up to compare rides and see if I can help with anything!tbelcher wrote:I like the ride, I also live in Katy and I'm currently going back and forth between 22's and 20's trying to figure out which way to go. Would love to hook up and checkout the ride in person. I'm new to the forum and for some reason can't PM, hit me up if we can meet up somewhere.




10.5" with et42 will stick out of the fender.tbelcher wrote:Looks real nice! With that offset I'm guessing the back wheel sticks outside the fendor a few MM? Any rubbing issues so far? My 22's will be test fit tomorrow and I'm contenplating swapping the 9" in the back for 10.5 with 42mm offset. Concern is the look of going past the fendor and rubbing.
10" +35 ??06M4.5 wrote:10.5" with et42 will stick out of the fender.tbelcher wrote:Looks real nice! With that offset I'm guessing the back wheel sticks outside the fendor a few MM? Any rubbing issues so far? My 22's will be test fit tomorrow and I'm contenplating swapping the 9" in the back for 10.5 with 42mm offset. Concern is the look of going past the fendor and rubbing.
Thanks guys!! I'm very happy with the turn out!! Mex..... Requested more pics so I'll be working on that in the next fee days... Raining in Houston now...DoN_BLaZe34 wrote:looking good BG! i agree the silver finish provides a nice contrast to the color of your M. nicely done bro













Not sure on painting the BBK. They look real sick in the red or yellow considering they are the real deal (bbk), but that's not for a short while... Tell me what you think Mexillis, considering painting my current calipers red or black since they really do pop out now??mexillis wrote:Car looks nice! I was just about to say you need to paint those calipers or something because they pop out. Good thing you're gona get the BBK, 10x better look IMO. Are you going to have them painted a certain color or leave em grey?