97+ Q45 Cold Air Intake Group buy!

Post by **Tgvince** » Wed Jul 30, 2003 1:48 pm

OH PS due to my anal retentive nature:) i will have them fab up one so i can test fit it to insure the quality im looking for...Of course that will add time to the process FYI.

Terry

Post by **BadQ45t** » Wed Jul 30, 2003 1:48 pm

I'm in now hurry, take your time. Just wanted to see if this was still on...glad to hear it is.

Post by **eQlipse** » Wed Jul 30, 2003 1:48 pm

Terry,

Add me to your list & keep me updated on delivery time & when you'd need payment. Is the price still $250? How many orders do you have so far? My address is [email protected].

Post by **PalmerWMD** » Wed Jul 30, 2003 1:48 pm

Bump.

Fred...

Post by **Tgvince** » Wed Jul 30, 2003 1:48 pm

Hey Gang,Its been a crazy month! Lets see my PC died and all the names i had stored in outlook of the guys wanting a CAI for the 97+ I lost. The Production guy was out of town for a couple weeks and i went to SEMA...Which was amazing to say the least:). Anyhow...If everyone ive talked to in the past via email that wanted one could chime in that would be awesome! Also after going to SEMA im considering looking at having these molded out of formed plastic...im looking into it:). Course it all comes down to cost. Again sorry for the delay! I appreciate everyones patience.

Terry[email protected]

Post by **zinkie13** » Wed Jul 30, 2003 1:48 pm

I would like to see pics of the CAI if i could. Thanks

Post by **Tgvince** » Wed Jul 30, 2003 1:48 pm

Ill post them here tomorrow the pics are at the office.

Terry

Post by **zinkie13** » Wed Jul 30, 2003 1:48 pm

Thanks a lot...I wanted to compare them to another CAI someone had mad for the 2nd gen Q

Post by **AZhitman** » Wed Jul 30, 2003 1:48 pm

Alright, Terry, now I'm a little perturbed with you.

You went to SEMA and didn't tell me? I had a thread about it in the meets section for a month! We could have hung out...

I have some ideas on your CAI plans... Call me soon.

Post by **BadQ45t** » Wed Jul 30, 2003 1:48 pm

What's the status????

Post by **Tgvince** » Wed Jul 30, 2003 1:48 pm

Current status is just collecting all the names i have 6 currently. If i can get 3 more ill ask for funds and get them made:).

Sorry AZ Hitman:)...I went with a few other guys from the SE-R community. Ill call you on your idea.

Terry

Post by **Tgvince** » Wed Jul 30, 2003 1:48 pm

Hey gang...Longtime no update...Sorry! Ive had a lot going on with the holidays and all (like the rest of you im sure). OK so Ive regrouped and am going to a smaller production shop that can make these as needed. So the JIG for the production unit should be done very soon and then Production Units to follow.

HEY AZHitman Sorry about SEMA...didnt see the meets section post.So gang please be patient with me a bit longer and ill get these ready for shipping.[email protected]

Terry Vincent

Post by **celica** » Wed Jul 30, 2003 1:48 pm

Post by **Tgvince** » Wed Jul 30, 2003 1:48 pm

Ive been Pulled in a bunch of different directions as of late....I havent forgotten about you guys:). Im in the process of ordering the flanges for the MAF. Ive got a bunch of the piping done and some of the various hardware assembled. I need to get the flanges then get them all welded up and Powder Coated...Sorry for the delay gang!

Terry

Post by **zinkie13** » Wed Jul 30, 2003 1:48 pm

Terry, do you have any updates on the CAI?

Post by **Tgvince** » Wed Jul 30, 2003 1:48 pm

The delay currently is getting the stupid flanges cut. Im not spending $10 on each MAF Flange and thats at 20 units and a month lead time:). So we got a Plasma cutter and should have them done verrrrry soon. I have no other excusses that you guys would believe...well there was this one Alien abduction excuse but i didnt think that would fly either:). Ill have info shortly guys...I promiss!

Terry

Post by **zinkie13** » Wed Jul 30, 2003 1:48 pm

Terry, how's the cutting going?

Post by **zinkie13** » Wed Jul 30, 2003 1:48 pm

Any advancements on this?

Post by **zinkie13** » Wed Jul 30, 2003 1:48 pm

Terry,

Have you finished the intake yet? I need to know if you have it completed asap because I need to make one or buy one of yours within the next two or three weeks. I am putting some bi-function HID projectors in my car and will need the extra space behind the lights for the projectors! If you have them ready I can paypal you right away. Thanks

Post by **JoshIsSciFi** » Wed Jul 30, 2003 1:48 pm

Any of you guys wanna run em when you get the CAI in?

Post by **Tgvince** » Wed Jul 30, 2003 1:48 pm

zinkie13 wrote:Terry,

Have you finished the intake yet? I need to know if you have it completed asap because I need to make one or buy one of yours within the next two or three weeks. I am putting some bi-function HID projectors in my car and will need the extra space behind the lights for the projectors! If you have them ready I can paypal you right away. Thanks

Well Ive kinda put it on the side for right now...Had alot going on. If you want give me your email and ill see about getting you more details.

Terry

Post by **Tgvince** » Wed Jul 30, 2003 1:48 pm

Hey Gang, Here are some pics of a finished unit. This one is spoken for from a member Ill let him chime in when hes ready:). We are going to slowly make about 5 of these now that i have a source for LOW quantity flanges.

Terry Vincent

Post by **PalmerWMD** » Wed Jul 30, 2003 1:48 pm

looks very good.

Fred..

Post by **Tgvince** » Wed Jul 30, 2003 1:48 pm

Slight changes are no T-bolt clamps (they look to bulky). We used silicone couplings Vs rubber and we eliminated a coulpling at the MAF. Also we utilized a tear drop shaped bracket at the thru hole to hide any unsightly cutting used to make the hole:).

Terry

Post by **BadQ45t** » Wed Jul 30, 2003 1:48 pm

so they are available now? Let me know [email protected].

Jeff

Post by **zinkie13** » Wed Jul 30, 2003 1:48 pm

Terry,

I'm so ready for this! I have my 00 gauge wire and the CAI is the next thing I need to start my HID project! Hopefullly I will be done by this weekend! Should be very sweet! I can't wait to have everything hooked up! Thanks so much for your help!

Post by **zinkie13** » Wed Jul 30, 2003 1:48 pm

Alright, I officially have this installed! haha Still haven't driven my car yet because I don't have my headlights finished yet. As soon as they are finished, along w/ moving my battery to my trunk, I'll post some pics of how everything went!

Post by **Rex** » Wed Jun 15, 2005 6:49 pm

My work here is done .

Post by **zinkie13** » Wed Jun 15, 2005 6:49 pm

Hey...I talked to terry last week. I wanted to ask him about whether or not he designed the custom exhaust for the Y33. He said he got out of that and I am guessing he sold his Q. However, he said he still has the plans for the CAI which I highly recommend.

Post by **maxnix** » Wed Jun 15, 2005 6:52 pm

So Zinkie, show us some picutures!

Guess we are left to Impul for the headers.

97+ Q45 Cold Air Intake Group buy!

Re: (zinkie13)

Re: (zinkie13)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums