Wiring Specialties pre-made conversion harnesses - RB development

[proto45]

ItzGenX - the RB26 R32 harness is very close to an RB20 unit, so making one would not be too difficult. Part ofthe issue is that the RB26 harness is complex enough, has a lot of extra wiring ( 2 mafs and 2 o2s and Injector Resistor Pack) and makes it much more expensive to make than the Sr or even the RB20/25 units we now make. If the interest is there, we can do a few hundred, but the swap is expensive enough, there aren't too many being done.

I might be wrong, so if we can get some interest here and get 20-30 pre-orders, it might be enough. Pricing will be $450 per harness or near so.
Any thoughts?

Also, Rb20 and RB25 harnesses are done, going to production now. Brand new pics and specs will be up on the site this coming week.

I know i would be interested in one. As long as it comes with engine harness for the RB26 and the lower harness for an RB25 transmission i would be set

[noodl35]

I think the interest is there. Nothing like a brand new harness complete plug-n-play for the rb26 w/rb25 trans

[brock864]

i was under the impression that these harnesses were brand new, but after looking on the website i see that you have to send them your uncut ka harness along with the uncut rb harness. am i wrong? please tell me im wrong

[StricNyne]

depends on which one u go with, the premade or the conversion i am about to give up, i can do the wiring my self i just wanted a new one but its takign entire too long...

[brock864]

what up carlos^^^

well the price on the wiring service alone is 359. dont see how they could sell the premade harness for the same price lol. but if thats what they wanna do im down!

[StricNyne]

with all these delays i forsee the premades being more, they dont even have my harness for my engine and chassis (damn s14) hows your car doing ? mine is running like s***

[brock864]

i agree itll probly be alot more than they first anticipated. same here man, about a week after we got home from the dragon my car started runnin like @ss. got a cracked exhaust mani so i guess its time to go big now lol. whats up with yours?

[proto45]

i was under the impression that these harnesses were brand new, but after looking on the website i see that you have to send them your uncut ka harness along with the uncut rb harness. am i wrong? please tell me im wrong

Yes you are wrong the lol. All the harnesses discussed in this thread are all about pre-made complete engine harnesses. So far they have them for the RB25, but not the RB26. That's what we are trying to convince the Wiring Specialties guys on. They just need about 20-30 pre-orders and they can start production on them.

Wanna buy one lol

[brock864]

i wouldnt pay more than about 425 for one. mine is fine just looks like s*** from me "modifying" it. would be nice to have an oem looking harness tho.

[proto45]

^^ Thats the point of these. They are OEM style harnesses. They are also a great option for those who don't want to tear into their own harnesses and meld them together. With a start up guarantee I think they are worth the money. Contact Yuri, I believe he is the guy at Wiring Specialties that can tell you everything about these.

[Wiring Specialties]

Thanks for the bits guys.
Just to clarify a few questions - We offer wiring service (which we have been doing for about 10 years now) and pre-made wiring harnesses that are a direct replacement to the JDM harness in a 240sx chassis. For now we have S13 SR in S13 and S14 chassis 240sx IN STOCK. The RB25 and RB20 into S13 have been in development a long time and are now almost done. The S14 SR into S13 and S14 chassis are also almost complete. So, we'll have a bunch of new offerings this year.

The new harnesses are made to our specifications, so they fit into the 240 perfectly and utilize OEM connectors and wiring specs.
The RB25 harness will retail for $399-$425, depending on the last few adjustments.
RB26 harnesses are currently not in the works. We'll see how things progress with interest for the RB26 units and decide later.

[proto45]

Thanks for the bits guys.
Just to clarify a few questions - We offer wiring service (which we have been doing for about 10 years now) and pre-made wiring harnesses that are a direct replacement to the JDM harness in a 240sx chassis. For now we have S13 SR in S13 and S14 chassis 240sx IN STOCK. The RB25 and RB20 into S13 have been in development a long time and are now almost done. The S14 SR into S13 and S14 chassis are also almost complete. So, we'll have a bunch of new offerings this year.

The new harnesses are made to our specifications, so they fit into the 240 perfectly and utilize OEM connectors and wiring specs.
The RB25 harness will retail for $399-$425, depending on the last few adjustments.
RB26 harnesses are currently not in the works. We'll see how things progress with interest for the RB26 units and decide later.

Well I hope you make the RB26 harnesses it would sure help a lot of us who chose to do the RB26 swap, but I understand the need for a large customer interest. Also if you did make pre-mades would you be able to wire in boost controllers and SAFC's still, just like your wiring service?

[zerodameaon]

Sign me up for a RB25 pre made this looks promising.

[Wiring Specialties]

Finally, big news.
We got all the details lined up for the production of the RB20 and RB25 to S13 harnesses.
Delivery date is set for late November.

Here are the links to the pre-order page: http://wiringspecialties.com/wsrehasrandr.html

Picture of the RB25DET into S13 harness. More pictures on the site


Thanks for all the support guys.

Yury Lyalko
Wiring Specialties

[amorasin]

so who's got one and how did it work out for you?

[sci2000tech]

Mine's in the mail right now. So far the service has been above and beyond my expectations, couldn't be happier

Since my engine setup is anything but stock, Yury had me send him pics and went over my setup with me to make sure the harness was modified to fit my application. He extended the MAFS plug and wired it for my Z32 blowthru setup, etc...

I'll post up some pics and a quick review after I install it. Still waiting on another stupid intake manifold gasket before I can throw everything back together, for the tenth time

[sci2000tech]

So I got my new harness yesterday and installed it today. All I can say is WOW! Everything was perfect and the fitment is great.

It's so nice to not have to worry about breaking brittle old clips. The quality of the connectors is fantastic. The wires are nice and pliable, very easy to work with. It even came with step-by-step instructions which made the installation take about 30 minutes.

I'll get some pics up tomorrow of the finished product.

Thanks again Wiring Specialties

[amorasin]

Great to hear! I just ordered mine so hopefully it gets here soon. I'm installing into my still auto vert would that be any different from an auto 240sx? I ask because I want to be able to drop my top while in motion hahaha.

[amorasin]

WS said they'll need a week to have it ready to ship to me. I dont if its because they need to adapt it to my convertible or what but its fine since I'm waiting for everything else.

[Wiring Specialties]

So I got my new harness yesterday and installed it today. All I can say is WOW! Everything was perfect and the fitment is great.

It's so nice to not have to worry about breaking brittle old clips. The quality of the connectors is fantastic. The wires are nice and pliable, very easy to work with. It even came with step-by-step instructions which made the installation take about 30 minutes.

I'll get some pics up tomorrow of the finished product.

Thanks again Wiring Specialties

Very glad to hear that your install went well. We are glad you like the harness too!
Be sure to post up some pics if you can.

[nismosis]

any updates on this? I am interested in an rb25 series 1 into an s14. I have an rb25 in my 98 s14 already, and it runs, but cylinders 5 and 6 have low compression/oil drains when i pour oil in the cylinders. I bought an rb25 motorset off of someone and am currently swaping the engines out so that I can rebuild my rb25 (and still be able to drive my "fun" car in the mean time) If you guys need an rb25-s14 harness for development, let me know because I will have an extra just sitting around for a while.

[Wiring Specialties]

Our Rb25 to S14 harness will actually be ready for pre-order in a few weeks.

[nismosis]

any update on an rb25 - s14 harness? im just curious because raw brokerage sells a wiring specialties harness for an rb25 into s14... just a little confused on why you guys dont have it available on ur site, yet raw brokerage does?

thanks,

zach

oh yea, heres the link http://rawbrokerage.com/WS-RB25DET-into ... 4-MAIN.htm

[95_240]

Rawbrokerage doesn't have that harness yet. I called them about a month ago when it was on their website and they don't have them. I don't know why they have it on their website when the product still hasn't been completed. I think the S14 rb25 harness is expected to be delivered sometime around the end of this year.

[boostedh23a1]

Rb26 Motor/Rb25 Trans. AEM map, speedhut water temp, oil pressure, no MAF...

[Wiring Specialties]

Rawbrokerage doesn't have that harness yet. I called them about a month ago when it was on their website and they don't have them. I don't know why they have it on their website when the product still hasn't been completed. I think the S14 rb25 harness is expected to be delivered sometime around the end of this year.

That is correct. The RB25 to S14 will be available for pre-orders this week on our site and will be arriving in December.

[Wiring Specialties]

Rb26 Motor/Rb25 Trans. AEM map, speedhut water temp, oil pressure, no MAF...

Boosted, if you are looking for this setup, send us an email at [email protected]
This is something I can make as long as you can send me your core harnesses for modification.

[StricNyne]

my job uses these harness they are top notch!!! i was very impressed by the rb25 harness in a s13 how it accounts for any motor !!

[USMCgetsome]

I WANT ONE ASAP! Cash in hand email me @ [email protected]
RB25DET/s13 premade harness greddy im q45 tb top mount turbo setup. DO WANT!

[Wiring Specialties]

I WANT ONE ASAP! Cash in hand email me @ [email protected]
RB25DET/s13 premade harness greddy im q45 tb top mount turbo setup. DO WANT!

This harness is available now.
http://wiringspecialties.com/wsprrbs1ands.html