Why is KA maxed at 10psi ?

Your premier source for information on the Turbo KA: KA24E-T and KA24DE-T (KA with aftermarket turbo kit)!
User avatar
#1 Stunna
Posts: 217
Joined: Sun Jan 12, 2003 9:47 pm

Post

Yeah I thought it was Marvel Mystery Oil a new lubricant that I am hearing of is call Klotz uplon.

Ivan


User avatar
#1 Stunna
Posts: 217
Joined: Sun Jan 12, 2003 9:47 pm

Post

"98TURBOKA"s A/F ratio's look pretty flat and solid. What kind of A/F's are you seeing ":: orion ::"? I should have my injectors early next week as well as my intercooler and Z32 MAF. I am gonna go with the S-AFC.

Ivan

:: orion ::
Posts: 1483
Joined: Fri May 23, 2003 4:40 pm
Car: '96 240SX, with KA-T @ 12psi...
Contact:

Post

My A/F is 10.8:1 from 3000 on - Very stable...

But that was without an intercooler, so much less dense air = a little more rich. With the intercooler I expect 11.5:1 or so under boost...I hope.

And that's with my hacked MAF and 370cc injectors...

Later - Brian

User avatar
rn240sx
Posts: 891
Joined: Mon Jan 05, 2004 6:15 pm
Car: 12 Frontier V6 (supercharged)
98 240sx ka-t (fully built)
09 Ninja 650R
06 Suzuki S40
15 Hyundai Santa-Fe 2.0T
Contact:

Post

Im pushing 15-17 psi on my stock block ~45k mile ka motor. NO problems yet, it pulls HARD..!! Jwt ecu, 740cc nismo inj, Z32 maf, Walbro fuel pump.I also run 100 octane race gas to be SURE that there is NO detonation. The only thing left I have to do is get on the dyno and tune it.


Return to “KA24ET / KA24DET Forum”