Who wants to guess how fast I went at the track???

Your premier source for information on the Turbo KA: KA24E-T and KA24DE-T (KA with aftermarket turbo kit)!
Chris@AMS
Posts: 353
Joined: Mon Apr 10, 2006 11:52 am
Car: 91 Nissan 240sx
Contact:

Post

Here's the deal. I will tell you everything you want to know/ask about the car, and you guess how fast it made it down the 1/4 mile.

The things that are in BOLD are what I think should most effect the decision.

AMS/Turbo240 Crate Motor-Arias 8.8:1 forged pistons (stock bore)-AMS Sportsman Rods-Calico Main and Rod Bearings-Fully grooved bearings-AMS ARP Main stud Kit-AMS 11mm Head stud kit-Thread-sert 11mm anchors for head studs-Properly shimmed and clearanced oil pump-New AMS OEM timing chain assemblies-Stock valves-Supertech Dual springs w/ titanium retainers-Crower v3 cams (not degreed and yet they still work...)-O-ring block deck surface-Fel-Pro Head Gasket

AMS/Turbo240 Turbo kit-AMS GT33 turbo-AMS tubular bottom mount t3 header-TiAL 44mm wastegate-AMS wastegate dump tube-AMS downpipe-AmS spec oil feed and return-Medium Precision FMIC-Custom AMS IC piping-Apex-i N1 exhaust w/ test pipe

AMS/Turbo240 Fuel system-Walbro 255 fuel pump-75lb injectors-Fuel Lab Rising Rate FPR-300zx TT fuel filter-Mitsubishi Injector Resistor pack-Liquid filled fuel pressure gauge

AMS/Turbo240 Pre-production Intake Manifold-Stock Throttle body

Igniton-Taylor Wires-NGK BKR7E-Stock coil-Stock distributor

Engine Management-AEM EMS-AEM Boost control Solenoid-AEM 5 bar map sensor-GM IAT

AMS Evo Small Battery kit-Modified to fit in 240sx

Cooling-Koyo Radiator-Altima fans -Greddy HP radiator cap

Driveline-AMS C4 transmission kit with transbrake-1pc steel driveshaft

Wheels and Tires-Weld Drag lites (4 lug baby)-26x10 MT ET Drags-Ivan's Bogart skinny's up front

Thats it! guess away!

If you need to know anything else about the car to make your educated decision, feel free to ask!


Frozen240
Posts: 218
Joined: Sun Dec 14, 2003 12:33 pm
Car: 92 240SX KADET

Post

How much psi?

Race gas?

Why the rising rate FPR? Couldn't the Walbro keep up?

What suspension mods do you have?

Do you have a welded diff?

If I guess within a tenth of a second, what do I win? (any thing from AMS? or just respect yo! )

User avatar
Zippy69
Posts: 486
Joined: Sun Aug 19, 2007 2:58 pm
Car: 1993 240sx coupe

Post

8.15@158

lrb_2000
Posts: 2854
Joined: Tue May 03, 2005 6:41 pm
Car: '91 Nissan KA-T hatch
Contact:

Post

10.4

User avatar
GTR PrYdE
Posts: 1184
Joined: Sun Jun 05, 2005 6:02 pm
Car: 1993 Nissan 240SX, 2003 Evolution VIII

Post

10.2 @ 134

S13FX
Posts: 1892
Joined: Sat Apr 30, 2005 10:59 am
Car: '69 l20b Dimeski :)

Post

It broke before you got it to the track?

frsh13
Posts: 959
Joined: Sun Jan 16, 2005 8:31 am
Car: 1991 240sx coupe

Post

I say 11.1 if you got good traction with those slicks

User avatar
xckid
Posts: 4697
Joined: Thu Dec 16, 2004 5:52 am
Car: 2004 Chevy Blazer ZR2

Post

umm i SAY you went faster then me!

User avatar
myRed240
Posts: 627
Joined: Sun Jan 12, 2003 9:42 pm
Car: '95 Nissan 240SX with a KA-T!
'07 Audi A3 2.0T DSG
'11 G37S Sedan
Location: San Diego

Post

10.2 @ 137

How long before we find out?

TheOne
Posts: 1836
Joined: Mon Aug 09, 2004 4:28 pm
Car: 93 240sx FB
Location: Arlington, TX

Post

16's, due to the car blowing up?

i'd say 10.5.

User avatar
ZiG
Posts: 836
Joined: Tue Aug 22, 2006 4:01 pm
Car: 1993 240sx coupe

Post

How much does it weigh?

User avatar
jpadilla12
Posts: 35
Joined: Mon May 22, 2006 4:46 am
Car: 240sx

Post

On a good night, I'll say about 11.6, so are you planning on heading to the track again ?

B-Boy DuB-L
Posts: 1089
Joined: Thu Mar 01, 2007 3:36 pm
Car: 1993 Nissan 240SX

Post

10.8

or

pessimistic 12.3

PencilShavings
Posts: 276
Joined: Sat Jan 21, 2006 2:55 pm
Car: '91 240 hatch

Post

how fast? 162mph

Chris@AMS
Posts: 353
Joined: Mon Apr 10, 2006 11:52 am
Car: 91 Nissan 240sx
Contact:

Post

Frozen240 wrote:How much psi?

Race gas?

Why the rising rate FPR? Couldn't the Walbro keep up?

What suspension mods do you have?

Do you have a welded diff?

If I guess within a tenth of a second, what do I win? (any thing from AMS? or just respect yo! )
29psi dropping to 25 by redline

c16 and 110 mix (ran out of 110)

Rising rate FPR's are needed by every boosted car. it is a 1:1 regulator.

I am running AGX's with eibach springs (pro kits i think)

Diff is a VLSD

If you guess right, you get a cookie

User avatar
Zippy69
Posts: 486
Joined: Sun Aug 19, 2007 2:58 pm
Car: 1993 240sx coupe

Post

When you gonna post answer?

ghx407
Posts: 517
Joined: Fri Nov 24, 2006 12:59 pm
Car: 1993 240SX KA-T

Post

9.9 @ 140mph

User avatar
Jookmasta
Posts: 5172
Joined: Fri Apr 18, 2003 3:26 pm

Post

11.26@129.............................

User avatar
DevilMB3017
Posts: 1639
Joined: Thu Sep 14, 2006 7:25 am

Post

I'm going with 10.9 @ 134.

Chris@AMS
Posts: 353
Joined: Mon Apr 10, 2006 11:52 am
Car: 91 Nissan 240sx
Contact:

Post

To relieve everyone of their suspense:

1.41 60 foot105 mph in the 1/810.31 @ 131 in the 1/4

One of these days I will get the video out. It looks awesome coming out of the hole.

Frozen240
Posts: 218
Joined: Sun Dec 14, 2003 12:33 pm
Car: 92 240SX KADET

Post

That's impressive! How much hp at the wheels?

Do you have any times to compare the difference between the C4 and the manual trans?


User avatar
eazye2000
Posts: 1880
Joined: Mon Jun 27, 2005 9:42 am
Car: S13 KA-DET
Location: Inverness, FL
Contact:

Post

Auto FTW!! Awesome times man! Glad to see you back on here.

Auto's are the shiznit when it comes to drag man. I hate switching gears in a manual at the track. Only thing manual is good for is drift.. Which I'm starting to get away from.

User avatar
WDRacing
Moderator
Posts: 15983
Joined: Mon Nov 25, 2002 2:00 am
Car: 95 240SX, 99 BMW 540i, 01 Chevy Express, 14 Ford Escape
Location: MFFO
Contact:

Post

Chris@AMS wrote:To relieve everyone of their suspense:

1.41 60 foot105 mph in the 1/810.31 @ 131 in the 1/4

One of these days I will get the video out. It looks awesome coming out of the hole.
Well done...cutting a 1.4 helps

User avatar
GTR PrYdE
Posts: 1184
Joined: Sun Jun 05, 2005 6:02 pm
Car: 1993 Nissan 240SX, 2003 Evolution VIII

Post

I was closest! Give me my prize! lol

User avatar
Slideways^Jordan
Posts: 703
Joined: Thu Aug 16, 2007 11:24 pm
Car: 1989 240sx Coupe-1991 240sx Hatch back

Post

Wow thatsa sweet time congrats on the 1.4 60 ft you must be great at dRAG.


Florida240sx
Posts: 11114
Joined: Thu Jul 01, 2004 7:17 am
Car: 1993 Nissan 240SX Hatch 5spd
2012 Nissan Altima S coupe 2.5
Location: DeLand FL

Post

Got a link to get a set of those rims?

Chris@AMS
Posts: 353
Joined: Mon Apr 10, 2006 11:52 am
Car: 91 Nissan 240sx
Contact:

Post

I bought them used off of a mustang guy I know. They are the highest backspacing 4 lug drag lites that you can get .

User avatar
Reno
Posts: 1015
Joined: Wed May 18, 2005 4:38 am
Car: 89 S13, boosted.. RAWR..

Post

zZZZzzzZZZzz
Modified by Reno at 7:14 AM 11/15/2007

User avatar
480sx
Posts: 4085
Joined: Sun Nov 12, 2006 5:27 pm
Car: 1996 Pearl White 240sx

Post

Chris@AMS wrote:
Rising rate FPR's are needed by every boosted car. it is a 1:1 regulator.
Explain, discus

User avatar
WI_S14_Goldie
Posts: 1027
Joined: Sat Nov 19, 2005 4:51 am
Car: 1995 Nissan 240sx SE, 91 240 fastback LE, 1997 kouki S14, DD = 93 Nissan Maxima
Location: Wisconsin
Contact:

Post

wow...nice...just curious, what was the fastest time u ever got with the stock block?


Return to “KA24ET / KA24DET Forum”