Where can you buy rb25det wiring harness?

[fast_s14]

I have searched nico, searched the web and called Venus-auto, tiger japanese, and a couple other places and cant seem to find an un-cut wiring harness for a series one rb25det. THe one i got with my motor has plugs broken, and wires cut or missing. If any one could lead me in the direction of one, i would be greatly appreciated.

[Mistaken]

I just got my motor from tiger japanese also and my harness is completely butchered ... they sent me a ECU but no ECU plug, hell i dont even have the harness that goes to my ignitor. I called them immediatly to try and straighten the matter out but so far they have done nothing and are pushing me off to their claims department.

[blurrbosi]

If not in the classifieds, try mckinney.

[SIL-LINE]

Just sent out an email to a contact i have in japan about your harness ..

Ill keep you updated ....

i bought two 20 harnesses with ECU's from them .. they send uncut and ready to go ..


Modified by SIL-LINE at 10:33 PM 5/7/2008

[fast_s14]

i bought my motor from tiger japanese also, they failed to send me a ps pump also. i called same day and they told me it would be 6-7 weeks before i get one. they reimbursed me a hundred dollars bc i told them i would find one else wares. they did have super fast shipping tho.

[Mistaken]

Yah they shipped my motor out monday and i recieved it today. Mine had no AC pump but had a PS pump.

O yah and more good news along with bad news..

My motor had a HKS twin disk in it... but the disks are shot.

[fast_s14]

the first thing i did when i pulled my motor off of the skid was remove the ac compressor and bracket.

[Mistaken]

I didnt want the a/c compressor either its just the fact that they say it comes with it and it didnt.

[mentordrift]

Just sent out an email to a contact i have in japan about your harness ..

Ill keep you updated ....

i bought two 20 harnesses with ECU's from them .. they send uncut and ready to go ..



Modified by SIL-LINE at 10:33 PM 5/7/2008

If they have lower harnesses too, I would be all about getting one of those for the speed sensor wire! haha

[silviasgp06]

hmm i remember looking at tiger japan for a motor but didnt go with them because it shows clearly in all the pics i looked at that the harnesses were cut, plus i even called. it helps to ask a **** ton of questions before dumping a couple grand.

as for the power steering, do what everyone else does and use the KA one. ive provided the link bellow. only thing is i havnt found that belt yet but im used to no power steering for a while now. btu now that the semester is over i am going to start looking for the dam belt.

zerothread/269541

[fast_s14]

i knew the wiring would be cut so i figured i would source one else wares. I already did the KA pump retrofit,.

hmm i remember looking at tiger japan for a motor but didnt go with them because it shows clearly in all the pics i looked at that the harnesses were cut, plus i even called. it helps to ask a **** ton of questions before dumping a couple grand.

as for the power steering, do what everyone else does and use the KA one. ive provided the link bellow. only thing is i havnt found that belt yet but im used to no power steering for a while now. btu now that the semester is over i am going to start looking for the dam belt.

zerothread/269541

[RizzoTK]

I have 2 options for your harness.

1 I ordered one complete uncut rb25det harness that I should receive by the end of the week. but I will take no less than I paid for it which is $300 plus shipping to you.

Option 2 Syko perfomance rb25det converted harness for s14 450 + shipping

[l0nestar]

Contact Carl H on the forum here. See what he says.

zerothread/244853

[iroc07]

Either have Carl H fix it if he wants to or I will do it for you. I have boxes and boxes of harnesses for just this sort of thing. That way when we are in the middle of a swap and we find something is cracked or corroded we can switch it out and not have to order something.A couple good pics of the harness and the cut wires to show the missing plugs would be a big help, for anyone willing to fix it for you so you might want to get that awhile.email me if you got questions.Good luck with the swap, I am sure you will love it.