wheel fitment question for a s14

[mastertech]

i have a 96 s14 that is currantly a base 4 lug, i am planning a complete suspension build this spring including coilovers, 300z brakes, 5 lug conversion and some new wheels. whell i found some wheels an i was wonding if the will stickout or rub, i am looking for the flush look and am not opposed to pulling and rolling the fenders.

they are ADR wheels m-classicsfront: 18x8.5 20mm offsetrear: 18x9.5 25mm offset

thanks in advance

[Nvkreationz]

you got a tight fit there my friend w/o a roll and is it lowered? I have 18x8.5 +20/18x9.5 +20 with it lowered and semi rolled in the rear, Im rubbing like a pornstar..ill get pics later

[adrianfromthecastle]

LOL.. you gotta understand, the definition of flush is very subjective.

they are ADR wheels m-classicsfront: 18x8.5 20mm offsetrear: 18x9.5 25mm offset

I'd say, by my standarts, go with +15 all around, or +15 up front and +20 in the rears. That extra 5-10mm makes a difference. But ofcourse, you're gonna need a slight tire stretch.

look at this thread for ideas zerothread/265282

[NABeast]

Thanks for the information,I am looking for wheels too.