whats the max width of the rim can we run ?
Re: whats the max width of the rim can we run ?
The pics look good you just need to lower it and you will be fine
Re: whats the max width of the rim can we run ?
The pics look good you just need to lower it and you will be fine
Re: whats the max width of the rim can we run ?
Did the bolt holes need any work because you took some of the material off the wheel?06M4.5 wrote:If the front sticks out you can get the front 2 wheels milled from 38mm to 42mm.
I did this to the rear of my car so that I could run the 285/30 without rubbing.
any side pics of the front, I would like to see how much they stick out.
I'm looking to have my pair of R35 wheels milled from 25et to 32et, and have the bolt holes reinforced. With some fender pulling and some CO's and a drop, I'm hoping I can get those to tuck with less than 2* neg. camber
Re: whats the max width of the rim can we run ?
No work to the bolts wholes needed.
As long as the wheel has enough (extra) material to mill you'll be ok.
As long as the wheel has enough (extra) material to mill you'll be ok.