What was done to your 240 today?

General discussion forum about the 240sx, and a great place to introduce yourself to the board!
User avatar
PyR0NiAk
Posts: 3851
Joined: Sun Mar 01, 2009 4:29 pm
Car: S13 SR W/ T2 GT3071R .86AR, JWT S4 Cams, 810cc Injectors,Z32 MAF, JWT tuned ECU 87mm 9:1 Compression CP pistons, Manley Rods
Location: Ohio
Contact:

Post

FINALLY STARTED IT!!!!


liquid_cool
Posts: 1700
Joined: Sat Jul 05, 2008 3:02 am
Car: 1990 Nissan 240SX KA24DE-T swap 8.6:1cr, duelsprings, ti retainers,supertech pistons, K1 H-beems balanced internals ect ect

Post

seamwelded part of the shock towers...welded up the left lca i tweaked sliding friday night...welded up the crossmember and hole for the bolt for the lca i tweeked friday night...fixed broken bolts for the fuel cell i broke friday night...replaced water temp gauge i shatterd friday night..started to fit a crapy duramax body kit..gave up to dring beer and post here..so goes my day!

Travisty
Posts: 148
Joined: Fri Feb 19, 2010 6:58 pm
Location: Phoenix, AZ

Post

I installed a new slave cylinder, and will be bypassing the damper box tomorrow morning.

User avatar
myfirst24010
Posts: 262
Joined: Thu Feb 14, 2008 6:09 pm
Car: 1993 240sx, 2004 BMW M3,

Post

Change my steering wheel from a broken one to a complete one

User avatar
myfirst24010
Posts: 262
Joined: Thu Feb 14, 2008 6:09 pm
Car: 1993 240sx, 2004 BMW M3,

Post

Travisty wrote:I installed a new slave cylinder, and will be bypassing the damper box tomorrow morning.
have it done. Love the firmer feel.

User avatar
badbob2121
Posts: 1989
Joined: Sat Jan 16, 2010 9:23 am
Car: '92 Nissan 240SXS13 Hatch ELLIS JUAN
'12 Ford Mustang GT RTR
Location: St. Louis

Post

installed a q45 ingniter/chip replacing the ghetto rigged one i had with my sr...cost = FREE lol also rewired my maf extension wiring...

User avatar
youngmoney
Posts: 377
Joined: Thu Dec 03, 2009 8:58 am
Car: 93 240sx SE

Post

took some old fuel lines off,"installed" a jDm MaDd TYzzyTe hose clamp,took out one of my exhaust manifold studs. SO much work. im surprised i got it all done in one day :laugh:

User avatar
breadbox
Posts: 8549
Joined: Tue Oct 17, 2006 4:09 pm
Car: 89 Nissan 240SX
89 Koop
84 720 4x4KC
Location: Va Bch

Post

vacuumed it.

User avatar
240sxjoe92
Posts: 207
Joined: Sun Apr 18, 2010 6:18 am
Car: 1991 Nissan 240sx hatch
Location: Fredrick MD

Post

Changed the oil.. :wavey:

User avatar
benz88
Posts: 135
Joined: Sat Jan 02, 2010 4:44 pm
Car: 91 240sx

Post

Drove it to my shop. Pulled the hood off, Splash guards. Rad Shroud(sp) and disconnected alot of s*** under there. Also primed the valve cover on the new K/A. Will be going Friday morning to finish up undoing stuff and pull thr motor and trans. Clean up the bay and swap in the new motor/trans.

User avatar
benz88
Posts: 135
Joined: Sat Jan 02, 2010 4:44 pm
Car: 91 240sx

Post

benz88 wrote:Drove it to my shop. Pulled the hood off, Splash guards. Rad Shroud(sp) and disconnected alot of s*** under there. Also primed the valve cover on the new K/A. Will be going Friday morning to finish up undoing stuff and pull thr motor and trans. Clean up the bay and swap in the new motor/trans.
Image

Image
Image

User avatar
s13sickboi
Posts: 394
Joined: Sat May 08, 2010 1:50 pm
Car: 1997 Nissan Hardbody XE
Location: DFW TX ftw

Post

oficially re-routed my battery!! :biggrin: just need to make a box... :squint: :eek:

some_white_guy
Posts: 99
Joined: Mon Mar 22, 2010 7:54 am
Car: '90 240sx white coupe
Location: San Jose, CA

Post

started her for the 2nd time since i bought it then brought her home from the shop and washed her.

Image
Image

User avatar
Mitchum
Posts: 126
Joined: Sun May 03, 2009 3:53 pm
Car: 2000 Dodge Dakota
1995 240SX
Location: Lethbridge, Alberta, Canada

Post

Re-assembled the interior, changed my smashed up fuse box. slow start,but its going somewhere.

User avatar
S14Kouki10
Posts: 472
Joined: Thu Feb 25, 2010 6:13 pm
Car: 1997 240sx
Location: TX

Post

drove the s*** out of it.

User avatar
bmr.S13
Posts: 111
Joined: Fri Feb 06, 2009 8:28 am
Car: 93 240sx hatch

Post

wow thread still going

pulled some nice sideways maneuvers from 12am to about 1:30
and currently preparing for this weekends lonestarbash :yesnod

iLLusive240^
Posts: 311
Joined: Thu May 03, 2007 2:13 pm
Car: Redtop S14 238 whp :D

Post

put my tial 50mm bov on!

User avatar
Valiant240sx
Posts: 76
Joined: Tue Feb 06, 2007 12:51 pm
Car: 1990 240sx Fastback

Post

Came home from work, looked at it, and put it up for sale on a couple forums :*(

User avatar
wingFeather
Posts: 1819
Joined: Thu Jul 21, 2005 10:08 am
Car: Current: 05 G35 Coupe
Previous: M35, M35 Sport, cube, J30, s13 sr20det, s13 rb20det, s14 zenki

Post

Mended a dent, changed oil, lowered front coilovers more, and finally washed it.

User avatar
benz88
Posts: 135
Joined: Sat Jan 02, 2010 4:44 pm
Car: 91 240sx

Post

Day 2 in the shop. Undid the rest of the hoses/electrical in the bay, Undid the Exhaust, Also painted my new VC. Took off the god awful spoiler the guy before me put on(Ford Escort spoiler). I guess its not too bad concidering im only into the swap for about 6hrs now. Next one will go quicker since this is my first time swaping these cars.

User avatar
zerepdivad
Posts: 2010
Joined: Thu Nov 24, 2005 5:39 pm
Car: '90 240sx . '02 Lexus IS300
Location: WI

Post

Checked all of my IC piping for leaks and tightened up a few leaks. Then i went ahead and put myk front bumper back onto it. Plans for tomorrow when i get off of work is to put my tein he coilovers from my old dd onto it and try and find my title so i can go and renew my plates and try out my new Enthalpy ka-t tune.

User avatar
zerodameaon
Posts: 112
Joined: Thu May 22, 2008 4:43 pm
Car: 1990 S13 Black Hatch with a currently NR RB25DET
1993 Red Vert
Location: San Diego CA
Contact:

Post

Went over to the shop and proceed to pull out the dash and all the crap under it. With the AC and heater gone there is so much room back there. Got a jump on pulling out the carpet to get at the sound deadner.

User avatar
nismoracingsx
Posts: 884
Joined: Tue Sep 19, 2006 5:15 pm
Car: 1993 White 240sx Coupe
Location: Bagram

Post

bought some h4 headlights today? lol. I'm kinda far away from my car, so all I can really do is buy parts for when I get back =p.

User avatar
matzinm2
Posts: 152
Joined: Tue Feb 19, 2008 11:34 am
Car: 1997 Nissan Altima GXE totaled, 1989 S13 Hatchback, 1988 FC vert exploded. 1991 s13 LE with leather and AC working!

Post

Finally paid for body and paint! And drove 246 miles in my FC just to grab my GP Sports spoiler so they can paint it/mount it at the same time :)

User avatar
Philipio
Posts: 1150
Joined: Thu Aug 31, 2006 1:35 pm
Car: 96 240sx, 96 Miata
Location: DFW, Texas
Contact:

Post

Installed a new rubber EGR hose to fix my CEL since the old one rotted apart and installed a working passenger window switch for the first time since I've owned the car.

91_240sx_chic
Posts: 4
Joined: Thu May 13, 2010 12:59 pm
Car: 91 240sx hatchback

Post

***Rant enclosed*** Today I attempted to put the head back on the 240 I just bought that suposidly had bent valves, but it didn't. So head went back on easy but I want to go to japan and shoot the engineers that thought it was a good idea to put the timing marks on the damn chains!!! The dude I got the car from didn't line the marks up so I couldn't get the cams timed right so later today I get to take the lower timing cover off and fix it. Oh well got a perfectly fine s13 for $500 with nothing wrong with it lol

User avatar
bmr.S13
Posts: 111
Joined: Fri Feb 06, 2009 8:28 am
Car: 93 240sx hatch

Post

oil change
radiator flush
and found out i have a tiny leak on my radiator (any suggestions on a good one) :laugh:
changed transmission fluid with REDLINE MT-90
cleaned throttle body and sea foamed it lol

lonestar bash tomorrow :woot:

User avatar
Lonismos14
Posts: 1351
Joined: Fri Sep 18, 2009 5:35 am
Car: 1995 Nissan 240sx, 1999 Chevy Hoe, 1996 Saturn Sl2

Post

Installed the thermostat on my rb properly. mocked up valve cover waiting on thenismo shop for the rest of gaskets. :yesnod

User avatar
JDM Sil4ty
Posts: 193
Joined: Fri Sep 04, 2009 4:00 pm
Car: Sil4ty

Post

put my stock intake and headers back on for a CALI smog ... :tisk:

Express
Posts: 35
Joined: Tue Apr 27, 2010 10:54 pm

Post

Stared at the cheesy 4 lugs and stock suspension...*shutter*


Return to “240sx General Discussion”