What was done to your 240 today?

[slikklogic]

leave the radio..ugh! dam turbo is backing off the manifold wtf.i put new lock washers and thread lock to prevent this. happens everytime

[the a3k]

im putting in a CF panel to cover where the radio and pocket are, then putting my turbo timer, boost controller, and gauges there. gonna make it look clean.

[Lobo240sx]

Pulled the head off. Man I forgot how much stock bs was in the back to unbolt in the back of the firewall on the head. Most of that is not going back on lol. Pistons and walls are beautiful. Valves look brand spanking new. I'm just gonna get the head resurfaced. Got plenty of power for now.

[JDM240SXcoupe]

Bought her an 02 sensor

[Armstec_S13]

I retro fitted some 9006 HID to fit my H1 triple projectors
Hand washed my engine bay
Yelled at it for lookin at me like I was some kind of freak

[1KleenS13]

Well today I got the AC working again.....who knows how long it will last , yesterday I replaced the fuel pump in a Wawa parking lot, and the day before that I replaced the upper rad hose... . I also started looking for a C5 Corvette so I can give the 240 a break sometimes.

[sci2000tech]

Got my new EFR turbo, so I've spent all day working on polishing the compressor housing. Talk about a slow process







And took my pistons, Rb26 crank, and rods to the shop building my engine so we can bore out the block and check for clearances. We're boring and stroking the Rb20 into a 2.3 liter, finally getting closer to being done

[Lobo240sx]

Well as I was inspecting the head one of the oil exhaust cam journals in the front is destroyed probably beyond repair. I'll take pics of it soon. Definitely a paper weight for now.

Looks like I'm gonna need some head work after all. Good thing I have a spare red top head. Probably just swap all the stuff over and get the head ported with new seals.

[Lobo240sx]

Here is what the bad cam journal looks like now. The other journals were slightly scored but can be cleaned up. This is what isn't supposed to look like. Also where the cam sprocket sits in front of the block is also pitted. It basically closed the oil gallery up slightly enough for the head to knock on the exhaust cam.





This is what it is supposed to look like. This is my spare redtop head. It is nasty and gritty. Cleaned it up the best I can and get it dipped at the machine shop.

[SoCal-S13]

bought a tanabe underbrace, k&n intake and a radiator cooling panel

[breadbox]

Yesterday I drilled out my Thermostat, today it runs exactly at half not higher.

Today I took of the upper intake of the hatch and installed a new gasket and some hoses. Now it should idle, after I fix what ever plug just came off.

[BabaGenushe13]

i gave her a kiss and told her how nice her shoes look today. =D

[SoCal-S13]

i gave her a kiss and told her how nice her shoes look today. =D

more like what i didnt do to my 240 today. AMS rebuild is complete, motor is in, go to install new radiator...parts guy gave me the wrong one. needless to say im on beer number 6 plotting my revenge.

[Valiant240sx]

got a new 240 yesterday and sold my old shell

washed and vacuumed my new hatch, fixing to move to a new house with a garage, cant wait....damn camera took a dump on me so I cant post any pics yet :*(

[BabaGenushe13]

i gave her a kiss and told her how nice her shoes look today. =D

more like what i didnt do to my 240 today. AMS rebuild is complete, motor is in, go to install new radiator...parts guy gave me the wrong one. needless to say im on beer number 6 plotting my revenge.

yesterday i fonlded her beneaths and did a full 300zx brake swap so today was all compliments and gentle lovin

[SoCal-S13]

i got this in the mail

[rsmithdrift]

watched it collect dust. I hate not having a licence. I'm so screwed till october.

[SoCal-S13]

watched it collect dust. I hate not having a licence. I'm so screwed till october.

got everything except the radiator and shroud in. also have a little bit of egr to remove still. oo and greddy header looks nice!





need to powder coat my valve cover and clean that damn engine bay

[420sxWETDREAMS]

Installed my headliner after I reupholstered

[98blackbell]

Got the a\c working!

Chilin in the summer.

Had to replace the gas tank it split.

While doin the gas tank put new bushings in!

Tinted the windows.

Now the kid has a coool, kewl hot rod!

Also had it dyno'd! Pulled 245 hp and 255 torque! That was at 11lbs of boost!

[JDM240SXcoupe]

installed my ngk spark plug wires and washed her.

[sly240]

I washed it. Then i put on a new headlight cover and adjusted my headlights.

[420sxWETDREAMS]

Installed my glove box after I re upholstered it.

[SR86]

Installed power folding mirrors and a digital climate control in my S13

[sly240]

I did a 300zx brake and 5 lug conversion today. just waiting on my wheels.

[breadbox]

Replaced fan clutch and it still gets warm :/

Also worked on what will be a fun SR hatch. Tomorrow we just need to install the diff and do the rest of the exhaust after the DP.

[nifares240]

bought a seam sealer to seal rear seams behind the bumper. adjusted the stupid clutch for like 20 million times.

[hbpignosePA]

after two years of waiting.... finally starting to prep my car for the swap.

r32 crossmember went in yesterday. cleaning up the shop today and waiting for moar parts

[PmpKinKing]

I put gas.....FULL TANK WHOOOOO!!!

[biggie]

Just put gas in G35 today, ouch.

But drove my S13 Vert Saturday, had been too hot and still was. Need 70s/80s back, these 90s suck. So the Vert may be stored for another 2 months or more, at least it keeps the mileage low I guess.