What mounts did use on your rb26?

[jayz706]

Thankyou... We removed all that stuff from mine too, i thought there would be an issue with the a/c lines. I was wrong, McKinneys mounts gave me lots of room. The canister im using is from the skyline clip not the stock one

[Nameless EJ6]

jayz706: Can you take a pic of the steering clearance? I'm interested in seeing how much it clears with the 26.

[jayz706]

you have to move the water and oil lines on the rear turbo, as for the down pipe. its going to friends exhaust shop monday to fabricate one. I will try to take some pics tomorrow.

[jayz706]

Completed the 5 lug conversion, LSD and skyline brakes up front....

[b-s14]

hey jay, did you get the measuring/dimensions and all that for the driveshaft..?

[jayz706]

using McKinney's mounts, we made the driveshaft 33 inches( i think). I will confirm that measurement monday morning. I will also get you the part numbers..

[b-s14]

hey jay, could you post more engine pics..? thanks

[jayz706]

Wow, on the rb26 each injector has its own power source. They are not all tied together.

[jayz706]

Here's a couple of pics of the steering knuckle/clearance issues..